Cisco 350-401 Online Practice Questions and Exam Preparation

Cisco 350-401 Online Questions & Answers

• Question 1511:

  How does a fabric AP fit in the network?

  A. It is in local mode and must be connected directly to the fabric border node
  B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
  C. It is in FlexConnect mode and must be connected directly to the fabric border node
  D. It is in local mode and must be connected directly to the fabric edge switch.
  D. It is in local mode and must be connected directly to the fabric edge switch.

  ---

  Explanation

  References:

  https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html

• Question 1512:

  How do EIGRP metrics compare to OSPF metrics?

  A. EIGRP metrics are based on a combination of bandwidth and packet loss, and OSPF metrics are based on interface bandwidth.
  B. EIGRP uses the Dijkstra algorithm, and OSPF uses The DUAL algorithm
  C. The EIGRP administrative distance for external routes is 170. and the OSPF administrative distance for external routes is undefined
  D. The EIGRP administrative distance for external routes is 170. and the OSPF administrative distance for external routes is 110
  A. EIGRP metrics are based on a combination of bandwidth and packet loss, and OSPF metrics are based on interface bandwidth.

• Question 1513:

  Which QoS queuing method transmits packets out of the interface in the order the packets arrive?

  A. custom
  B. weighted-fair
  C. FIFO
  D. priority
  C. FIFO

  ---

  Explanation

  First-in, first-out (FIFO): FIFO entails no concept of priority or classes of traffic. With FIFO, transmission of packets out the interface occurs in the order the packets arrive, which means no QoS

• Question 1514:

  What is one difference between the RIB and the FIB?

  A. The RIB keeps all routing information received from peers, and the FIB keeps the minimum information necessary to make a forwarding decision.
  B. The RIB works at the data plane, and the FIB works at the control plane.
  C. The FIB contains routing prefixes, and the RIB contains the Layer 2 and Layer 3 information necessary to make a forwarding decision.
  D. The RIB is known as the CEF table, and the FIB is known as the routing table.
  A. The RIB keeps all routing information received from peers, and the FIB keeps the minimum information necessary to make a forwarding decision.

• Question 1515:

  A customer has completed the installation of a Wi-Fi 6 greenfield deployment at their new campus. They want to leverage Wi-Fi 6 enhanced speeds on the trusted employee WLAN.

  To configure the employee WLAN, which two Layer 2 security policies should be used? (Choose two.)

  A. WPA2 (AES)
  B. 802.1X
  C. OPEN
  D. WEP
  E. WPA (AES)
  A. WPA2 (AES)
  B. 802.1X

  ---

  Explanation

  If some devices experience problems connecting to the Wi-Fi 6 network, the problem may be in missing WPA3 support or the "WPA3/WPA2 mixed mode" feature. Mixed mode is intended to ensure that older clients can still connect, but in practice there are some clients who do not recognize this setting and refuse to connect at all. As WP3 is much safer than WPA2, we do not recommend downgrading the security of WPA2 to let older clients connect.

  Well WPA2 always better than OPEN.

• Question 1516:

  DRAG DROP

  Drag and drop the components of the Cisco SD-Access fabric architecture from the left onto the correct descriptions on the right. Not all options are used.

  Select and Place:

  

  

• Question 1517:

  

  Refer to the exhibit.

  What is achieved by this Python script?

  A. It counts JSON data from a website.
  B. It loads JSON data into an HTTP request.
  C. It reads JSON data into a formatted list.
  D. It converts JSON data to an HTML document.
  C. It reads JSON data into a formatted list.

• Question 1518:

  Which feature does Cisco DNA Center Assurance provide?

  A. application policy configuration
  B. device onboarding and configuration
  C. software upgrade and management
  D. data correlation and analysis
  D. data correlation and analysis

• Question 1519:

  Refer to the exhibit.

  

  An engineer must create a script that appends the output of the show process cpu sorted command to a file.

  Which action completes the configuration?

  A. action 4.0 syslog command "show process cpu sorted | append flash:high-cpu-file"
  B. action 4.0 cli command "show process cpu sorted | append flash:high-cpu-file"
  C. action 4.0 ens-event "show process cpu sorted | append flash:high-cpu-file"
  D. action 4.0 publish-event "show process cpu sorted | append flash:high-cpu-file"
  B. action 4.0 cli command "show process cpu sorted | append flash:high-cpu-file"

  ---

  Explanation

  References:

  https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/eem/command/eem-cr-book/eem-cr-a2.html

• Question 1520:

  Which two benefits result from a network design mat uses small and repeatable sections? (Choose two.)

  A. lower monitoring requirements
  B. low latency
  C. scalability
  D. quick failure isolation
  E. improved throughput
  C. scalability
  D. quick failure isolation