Cisco 350-401 Online Practice Questions and Exam Preparation

Cisco 350-401 Online Questions & Answers

• Question 11:

  What is a characteristic of a Type 1 hypervisor?

  A. It is referred to as a hosted hypervisor.
  B. It is completely independent of the operating system.
  C. Problems in the base operating system can affect the entire system.
  D. It is installed on an operating system and supports other operating systems above it.
  B. It is completely independent of the operating system.

• Question 12:

  How are control traffic, client authentication and data traffic handled in a mobility express environment?

  A. Control traffic and client authentication is handled centrally by the controller. Data traffic is switched centrally by the controller.
  B. Control traffic and client authentication is handled centrally by the controller. Data traffic is switched locally by the access points.
  C. Control traffic and client authentication is handled locally by each access point. Data traffic is switched locally by the access points.
  D. Control traffic and client authentication is handled locally by each access point. Data traffic is switched centrally by the controller.
  B. Control traffic and client authentication is handled centrally by the controller. Data traffic is switched locally by the access points.

• Question 13:

  

  Refer to the exhibit. An LACP port channel is configured between Switch-1 and Switch-2, but It falls to come up.

  Which action will resolve the issue?

  A. Configure Switch-1 with channel-group mode active
  B. Configure Switch-2 with channel-group mode desirable.
  C. Configure Switch-1 with channel-group mode on.
  D. Configure SwKch-2 with channel-group mode auto
  A. Configure Switch-1 with channel-group mode active

• Question 14:

  Which two Cisco SD-Access components provide communication between traditional network elements and controller layer? (choose two)

  A. network data platform
  B. network underlay
  C. fabric overlay
  D. network control platform
  E. partner ecosystem
  B. network underlay
  C. fabric overlay

• Question 15:

  Refer to the exhibit.

  R2(config)# ntp authenticate

  R2(config)# ntp authentication-key 1 md5 NTP-p455w0rd

  R2 is configured as an NTP master sourcing NTP packets from its locally connected interface of 10.1.1.1.

  Which additional configuration is needed to complete the configuration?

  A. ntp server 10.1.1.1 key NTP-p455w0rd
  B. ntp trusted-key NTP-p455w0rd
  C. ntp server 10.1.1.1 key 1
  D. ntp trusted-key 1
  D. ntp trusted-key 1

  ---

  Explanation

  The correct answer is Option D. ntp trusted-key 1.

  For NTP authentication to work, three elements are required:

  ntp authenticate ntp authentication-key 1 md5 NTP-p455w0rd ntp trusted-key 1

  The exhibit already enables NTP authentication and defines authentication key ID 1. The missing command is the command that marks key 1 as trusted.

  Option A is incorrect because the NTP key is referenced by key ID, not by the password string.

  Option B is incorrect because ntp trusted-key uses the numeric key ID, not the password.

  Option C is incorrect because ntp server 10.1.1.1 key 1 is a client-side command and does not complete the missing trusted-key configuration shown in the exhibit.

• Question 16:

  Refer to the exhibit

  

  A network engineer must use a Python script lo convert data received from a network device.

  Which type of data is printed to the console when the script runs?

  A. dictionary with a key-value pair
  B. list of lists
  C. list of strings
  D. tuple list
  A. dictionary with a key-value pair

• Question 17:

  DRAG DROP

  Drag and drop the characteristics from the left to the table types on the right.

  Select and Place:

  

  

• Question 18:

  Which outbound access list, applied to the WAN interface of a router, permits all traffic except for http traffic sourced from the workstation with IP address 10.10.10.1?

  A. ip access-list extended 10 deny tcp host 10.10.10.1 any eq 80 permit ip any any
  B. ip access-list extended 200 deny tcp host 10.10.10.1 eq 80 any permit ip any any
  C. ip access-list extended NO_HTTP deny tcp host 10.10.10 1 any eq 80
  D. ip access-list extended 100 deny tcp host 10.10.10.1 any eq 80 permit ip any any
  D. ip access-list extended 100 deny tcp host 10.10.10.1 any eq 80 permit ip any any

• Question 19:

  Refer to the exhibit.

  

  CR2 and CR3 are configured with OSPF.

  Which configuration, when applied to CR1, allows CR1 to exchange OSPF information with CR2 and CR3 but not with other network devices or on new interfaces that are added to CR1?

  A. router ospf 1 network 0.0.0.0 255.255.255.255 area 0 passive-interface GigabitEthernet0/2
  B. router ospf 1 network 10.165.231.0 0.0.0.255 area 0 network 172.27.206.0 0.0.0.255 area 0 network 172.24.206.0 0.0.0.255 area 0
  C. interface Gi0/2 ip ospf 1 area 0 router ospf 1 passive-interface GigabitEthernet0/2
  D. router ospf 1 network 10.0.0.0 0.255.255.255 area 0 network 172.16.0.0 0.15.255.255 area 0 passive-interface GigabitEthernet0/2
  D. router ospf 1 network 10.0.0.0 0.255.255.255 area 0 network 172.16.0.0 0.15.255.255 area 0 passive-interface GigabitEthernet0/2

• Question 20:

  Which command set configures RSPAN to capture outgoing traffic from VLAN 3 on interface GigabitEthernet 0/3 while ignoring other VLAN traffic on the same interface?

  A. monitor session 2 source interface gigabitethernet0/3 rx monitor session 2 filter vlan 3
  B. monitor session 2 source interface gigabitethernet0/3 rx monitor session 2 filter vlan 1 - 2, 4 - 4094
  C. monitor session 2 source interface gigabitethernet0/3 tx monitor session 2 filter vlan 3
  D. monitor session 2 source interface gigabitethernet0/3 tx monitor session 2 filter vlan 1- 2, 4 - 4094
  C. monitor session 2 source interface gigabitethernet0/3 tx monitor session 2 filter vlan 3