Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 81:

  Refer to the exhibit.

  

  Given this FCoE topology, host VFC interface and FC storage are in the same VSAN (VSAN 10). The VSAN is in the allow list for both ISLs. Both ISLs are up at 4 GB.

  Which command can be issued on the N5K command line to confirm that SCSI traffic from the host to the storage will flow across both links, as opposed to using only one link?

  A. show fspf traffic vsan 10
  B. show vsan 10
  C. show trunk protocol
  D. show fcroute unicast vsan 10
  B. show vsan 10

• Question 82:

  You have configured a Cisco UCS C460 M2 Rack-Mount Server with two VIC 1225 adapters for single-wire management with Cisco UCS Manager. Which statement correctly describes the operation of these adapters?

  A. One VIC is designated to carry management, and the other VIC is designated to carry data traffic.
  B. Both VICs will be used for management and data traffic.
  C. One VIC will carry management, and both VICs will carry data traffic.
  D. The Cisco UCS C460 M2 does not support two VIC 1225 adapters simultaneously.
  C. One VIC will carry management, and both VICs will carry data traffic.

• Question 83:

  Refer to the exhibit.

  

  Which option describes the output that is shown in bold in the exhibit?

  A. This output represents a standby VIF.
  B. This output indicates that fabric failover has been enabled on vNIC 3.
  C. This output represents a reserved system VIF.
  D. This output represents an unpinned interface.
  A. This output represents a standby VIF.

• Question 84:

  The Cisco Nexus 1000V Series Switches are virtual machine access switches that are an intelligent software switch implementation for VMware vSphere environments running the Cisco NX-OS Software operating system. Together with the VMware ESX hypervisor, the Nexus 1000V supports Cisco VN-Link server virtualization technology, which provides mobile virtual machine security and network policy for VMware View components, including the DHCP snooping feature. DHCP snooping is disabled on the Nexus 1000V by default.

  When the DHCP snooping feature is enabled on the Nexus 1000V, what are the default trust settings for the vEthernet and uplink ports?

  A. All vEthernet ports are trusted, and all Ethernet ports such as uplinks and port channels are trusted.
  B. All vEthernet ports are not trusted, and all Ethernet ports such as uplinks and port channels are not trusted.
  C. All vEthernet ports are trusted and all Ethernet ports such as uplinks and port channels are not trusted.
  D. All vEthernet ports are not trusted and all Ethernet ports such as uplinks and port channels are trusted.
  D. All vEthernet ports are not trusted and all Ethernet ports such as uplinks and port channels are trusted.

• Question 85:

  Drag Drop

  Select and Place:

  

  

• Question 86:

  Drag and drop feature on the left onto the appropriate business benefits on the right.

  Select and Place:

  

  

• Question 87:

  Which statement is true about DHCP snooping on the Cisco Nexus 7000 platform?

  A. DHCP snooping cannot be enabled globally and on a per-VLAN basis.
  B. By default, DHCP snooping is disabled globally and on all VLANs.
  C. You can enable DHCP snooping on a single VLAN only.
  D. For DHCP snooping to function properly, all DHCP servers must be connected to the device through untrusted interfaces.
  B. By default, DHCP snooping is disabled globally and on all VLANs.

• Question 88:

  Refer to the exhibit.

  

  Which three statements about the exhibit output related to Cisco Fabric Services are true? (Choose three.)

  A. The lock can only be released only by the operations manager user on the 10.1.1.11 switch.
  B. The admin user on the 10.1.1.11 switch must clear the lock.
  C. The tacacs+ commit command is the only command that can be used to clear the lock.
  D. Any network-admin user can release the lock with the command clear tacacs+ session.
  E. The operations manager user has started, but not committed, a configuration change for the feature tacacs+ command.
  F. If committed, the changes are automatically saved to the startup configuration on all switches.
  D. Any network-admin user can release the lock with the command clear tacacs+ session.
  E. The operations manager user has started, but not committed, a configuration change for the feature tacacs+ command.
  F. If committed, the changes are automatically saved to the startup configuration on all switches.

• Question 89:

  Drag the service profile modifications that require a blade reboot to be effective from the left and drop them in the list on the right. Not all options will be used.

  Select and Place:

  

  

• Question 90:

  Which three capabilities make the Cisco Nexus 7010 switch an effective solution for the data center core? (Choose three.)

  A. virtualization
  B. unified I/O
  C. support for 48-port Gb/s line card
  D. support for Data Center Service Modules
  E. high performance
  F. high availability
  B. unified I/O
  E. high performance
  F. high availability