Cisco 350-029 Online Practice Questions and Exam Preparation

Cisco 350-029 Online Questions & Answers

• Question 131:

  Which three statements about OSPF partial SPF are true? (Choose three)

  A. If it is triggered by Type 4, all Type 4 LSAs that announce a certain ASBR and all Type 5 and 7 LSAs are processed
  B. If it is triggered by Types 5 and 7, all Type 5 and 7 LSAs that contribute to a certain destination are processed.
  C. If it is triggered by Type 2, all Type 2 LSAs that contribute to a certain destination are processed.
  D. It is triggered by the change of Type 3, 4, 5, and 7 LSAs.
  E. It is triggered by the change of Type 2, 3, 5, and 7 LSAs
  A. If it is triggered by Type 4, all Type 4 LSAs that announce a certain ASBR and all Type 5 and 7 LSAs are processed
  B. If it is triggered by Types 5 and 7, all Type 5 and 7 LSAs that contribute to a certain destination are processed.
  D. It is triggered by the change of Type 3, 4, 5, and 7 LSAs.

  ---

  Executed on a change in a type-3/4/5/7 LSA (as per sections 16.5 and 16.6 of RFC2328) If there is a change in a type-1 or type-2 LSA, it affects the topology of the area and so a full SPF must be run

• Question 132:

  Refer to the exhibit.

  

  Router 2 connects OSPF area 1 and area 0. Router 2 receives LSA type 1 from Router 1 in area

  1. How many type 3 LSAs will be generated by Router 2 into area 0 to advertise all prefixes that are announced by the Router 1 LSA type 1 packet?

  B. 2
  C. 3
  D. 4
  C. 3

• Question 133:

  What is the requirement of Remote Triggered Black Hole (RTBH) filtering?

  A. ISIS updates exchange between trigger router and black hole router
  B. EBGP updates exchange between trigger router and black hole router
  C. None of above
  D. OSPF updates exchange between trigger router and black hole router
  E. IBGP updates exchange between trigger router and black hole router
  E. IBGP updates exchange between trigger router and black hole router

• Question 134:

  The OSPF External LSA for prefix x.x.x.x exists in the OSPF database, but the prefix is not installed in the routing table. Which are possible explanations? (Choose three)

  A. ASBR originating the LSA is not reachable.
  B. Route to the Forwarding Address is an internal OSPF route.
  C. Inbound distribute-list is configured under the ospf process and it is denying x.x.x.x
  D. Route to the ASBR does not follow the same path as the one to the Forwarding Address.
  E. Route to the Forwarding Address is not an internal OSPF route.
  A. ASBR originating the LSA is not reachable.
  C. Inbound distribute-list is configured under the ospf process and it is denying x.x.x.x
  E. Route to the Forwarding Address is not an internal OSPF route.

• Question 135:

  Referring to the exhibit, if RTP header compression is used on the link, the header's overhead on the voice packet will be reduced by what percent?

  

  A. from 50% to 25%
  B. from 50% to 20%
  C. from 70% to 20%
  D. from 70% to 33%
  D. from 70% to 33%

• Question 136:

  Which two options describe the order of preference of attributes when some or all are applied to one neighbor in BGP? (Choose two.)

  A. For inbound updates, the order of preference is route-map, filter-list, prefix-list, distribute-list.
  B. For inbound updates, the order of preference is filter-list, route-map, prefix-list, distribute-list.
  C. For inbound updates, the order of preference is prefix-list, route-map, filter-list, distribute-list.
  D. For outbound updates, the order of preference is filter-list, prefix-list, distribute-list, route- map.
  E. For outbound updates, the order of preference is prefix-list, distribute-list, filter-list, route- map.
  F. For outbound updates, the order of preference is route-map, prefix-list, distribute-list, filter- list.
  A. For inbound updates, the order of preference is route-map, filter-list, prefix-list, distribute-list.
  E. For outbound updates, the order of preference is prefix-list, distribute-list, filter-list, route- map.

• Question 137:

  Which three statements about MPLS traffic engineering (MPLS TE) are true? (Choose three)

  A. MPLS TE supports admission control
  B. MPLS TE tunnel traffic is a link attribute to compute the TE tunnel path
  C. MPLS TE uses BGP extension to advertise link attributes
  D. MPLS TE provides protection capability
  E. MPLS TE uses RSVP to establish LSP
  A. MPLS TE supports admission control
  D. MPLS TE provides protection capability
  E. MPLS TE uses RSVP to establish LSP

• Question 138:

  All secure domain routers (SDRs) have shared attribute and resources. Which three resources are shared all SDRs? (Choose three.)

  A. privilege-level configuration
  B. fabric cards
  C. SNMP traps
  D. admin-level configuration
  E. exec-level configuration
  B. fabric cards
  C. SNMP traps
  D. admin-level configuration

  ---

  1.4. SP high end product

  There are shared attributes and resources common to all SDRs. It is important to note that the shared resources are critical to the system's overall operation.

  Some examples of shared resources that are common to SDR are:

  -Environmental resources.

  -Power supplies.

  -

  Fan trays.

  -

  Fan controllers.

  -Fabric cards.

  Software related:

  *

  Exec-level configuration. Configuration in admin mode can affect all SDRs.

  *

  Admin-level configuration. Admin-level command can impact owner SDR and non-owner SDRs.

  *

  Process instances. A few processes are shared, systemwide processes such as LRd (SDR Deamon). Management:

  *

  SNMP traps. For example, shared power, fans, and fabric-related traps.

  *

  SNMP polling. Shared for power, fans, and fabric-related MIBS.

  *

  Syslogs. Some non-owner SDRs are logged to the owner SDR.

  *

  Shared environment variables.

• Question 139:

  What is the typical marked DSCP value for a voice signaling packet in VoIP technology?

  A. BE
  B. AF41
  C. AF21
  D. EF
  E. AF31
  E. AF31

• Question 140:

  Select and Place: