1. Home
  2. Cisco
  3. 300-610

Designing Cisco Data Center Infrastructure (DCID)

Exam Details

  • Exam Code
    :300-610
  • Exam Name
    :Designing Cisco Data Center Infrastructure (DCID)
  • Certification
    :CCNP
  • Vendor
    :Cisco
  • Total Questions
    :240 Q&As
  • Last Updated
    :Apr 25, 2024

Cisco CCNP 300-610 Questions & Answers

  • Question 191:

    The network infrastructure team is beginning to automate routine tasks within the Cisco ACI fabric and is searching for the appropriate solution The solution must not require any additional software installed on the Cisco APIC Networking team members lack automation experience and prefer to use a tool that does not require in-depth programming knowledge Finally configuration within the Cisco ACI fabric is rarely modified or removed Which solution must the team choose?

    A. Cobra SDK

    B. Ansible

    C. Terraform

    D. Puppet

  • Question 192:

    An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)

    A. HSRP

    B. VSS

    C. vPC

    D. 802.1q

    E. FEX

  • Question 193:

    Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?

    A. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.

    B. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.

    C. 8-Gbps links and 10-Gbps links use 8B/10B encoding.

    D. 8-Gbps links and 10-Gbps links use 64B/66B encoding.

  • Question 194:

    An engineer must secure the payload traversing across the DCI. The solution must support confidentially and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used.

    Which technology must be used to support these requirements?

    A. GRE

    B. MACsec

    C. IPsec

    D. OTV

  • Question 195:

    An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?

    A. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.

    B. A separate DSCP value must be configured for all FCIP VSAN traffic.

    C. A separate DSCP value and priority queuing must be configured for all FCIP traffic.

    D. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.

  • Question 196:

    Refer to the exhibit A Cisco engineer is configuring a next-generation Cisco HyperFlex HX data platform with 2 x Cisco UCS 6248UP fabric interconnects. 8 x Cisco HX-Series HX240c-M4SX servers, plus 8 x Cisco UCS B200-M4 blade servers Cisco UCS 5108 blade chassis, and Cisco UCS 2204XP fabric extenders The solution is configured with HX Release 4 5(2a) using VMware ESXi 7 0 U2 After the engineer migrates all customer VMs to the new solution platform, the engineer decides to create HX Native snapshots for all the VMs The engineer performs the operation and notices that some of the VMs are not creating snapshots. What is the most probable reason that the HX Native snapshots are not created?

    A. Virtual machines are in suspended state

    B. The servers have duplicate names

    C. The source disk is thick provisioned

    D. The node has insufficient datastore space

  • Question 197:

    An engineer needs an orchestration and monitoring tool that should be used for managing the storage networks and VXLAN fabrics. The tool should also allow support built-in dashboard and real-time health summary for managed devices. Which tool meets these requirements?

    A. Cisco Intersight

    B. Ansible

    C. Puppet

    D. Cisco DCNM

  • Question 198:

    A network engineer must perform a VMM integration for the VMWare vCenter platform with the Cisco ACI Fabric. The vCenter is already installed in one of the rack servers connected to ACI leaf switches in a vPC mode. Which type of management network must be used to integrate vCenter with ACI?

    A. ARC infra

    B. VLAN infra

    C. out-of-band management

    D. In-band management

  • Question 199:

    Which pools are used when a vNIC template is created in Cisco UCS Manager?

    A. WWPN

    B. UUID

    C. MAC

    D. IP

  • Question 200:

    The end users report issues with datastore reachability between the newly installed virtual machines (VMs) and the storage array. The VMs are deployed on a Cisco C-Series server, directly connected with Cisco Nexus 5672UP switches over FCoE VLAN. The data traffic on VLAN 99, which is designated as a native VLAN, reaches its default gateway, but FCoE VLAN 99 fails to access the datastore.

    Which action resolves the problem?

    A. Implement FCoE traffic on VLAN 10 and data traffic on VLAN 99.

    B. Implement host-facing FCoE ports as spanning-tree port type edge.

    C. Configure the FCoE VLAN in the VSAN database before including it in the trunk port.

    D. Configure the FCoE VLAN traffic on a separate interface from any other VLANs that traverse the network.

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 300-610 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.