Cisco 300-370 Online Practice Questions and Exam Preparation

Cisco 300-370 Online Questions & Answers

• Question 101:

  Refer to the exhibit.

  

  

  An access point joins the secondary wireless controller but not the primary wireless controller. Another access point has joined the controller and is working fine. The network engineer can ping the wireless controller and the access point from the core switch.

  Which is the cause of the issue?

  A. The trunk ports are missing a spanning tree configuration.
  B. The port channel is configured with the wrong negotiation protocol.
  C. The EtherChannel configuration is incorrect.
  D. The trunk port configuration is incorrect.
  A. The trunk ports are missing a spanning tree configuration.

• Question 102:

  Which EAP method requires that supplicants have a client-side certificate?

  A. LEAP
  B. EAP-TTLS
  C. PEAP/MS-CHAPv2
  D. EAP-TLS
  D. EAP-TLS

• Question 103:

  A wireless user is experiencing connectivity issues with their Mac OS laptop. If the Mac is exhibiting the behavior of a "sticky client," how can the tech verify which AP the user is currently connected to?

  A. Hold shift while clicking the wireless icon.
  B. Hold option while clicking the wireless icon.
  C. Hold control while clicking the wireless icon.
  D. Hold command while clicking the wireless icon.
  B. Hold option while clicking the wireless icon.

• Question 104:

  In a Cisco OfficeExtend environment, which encryption type is used between the access point and the wireless LAN controller?

  A. DTLS
  B. TLS
  C. STLS
  D. OpenSSL
  A. DTLS

  ---

  DTLS data encryption is enabled automatically for OfficeExtend access points but disabled by default for all other access points. Most access points are deployed in a secure network within a company building, so data encryption is not necessary. In contrast, the traffic between an OfficeExtend access point and the controller travels through an unsecure public network, so data encryption is more important for these access points. When data encryption is enabled, traffic is encrypted at the access point before it is sent to the controller and at the controller before it is sent to the client.

• Question 105:

  Which Cisco WLC debug command allows you to determine if the certificate process is failing in the CAPWAP messages?

  A. debug pm pki enable
  B. debug cert events enable
  C. debug capwap events enable
  D. debug capwap packet enable
  E. debug capwap errors enable
  E. debug capwap errors enable

• Question 106:

  Which approach is used to determine if an on wire rogue AP exists and is active?

  A. RLDP
  B. UDP
  C. DTLS
  D. RSSI
  A. RLDP

• Question 107:

  An engineer is troubleshooting Layer 2 issues and discovers intermittent reachability to devices in same VLAN.

  Which two causes are common of this issue? (Choose two.)

  A. A duplex mismatch has been detected.
  B. The MAC address is flapping.
  C. A unidirectional link is present.
  D. The root bridge has been changed.
  E. The duplex mode is not configured.
  B. The MAC address is flapping.
  C. A unidirectional link is present.

• Question 108:

  An engineer wants to run the Voice Audit tool in PI and wants to be able to verify:

  that clients will be capable of having static IPs whether or not Call Admission Control is enabled Which two rules field descriptions must be checked in the report? (Choose two.)

  A. DHCP assignment
  B. CAC: max bandwidth
  C. ACM
  D. DTPC
  E. load-based CAC
  A. DHCP assignment
  E. load-based CAC

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/reference/guide/pi_ref.pdf

• Question 109:

  A network engineer is troubleshooting why EAP authentication with a client is failing. Which two commands should be used to resolve the issue? (Choose two.)

  A. debug dot1x notifications enable
  B. debug dot1x events enable
  C. debug arp
  D. debug aaa detail enable
  E. debug aaa events detail enable
  B. debug dot1x events enable
  E. debug aaa events detail enable

• Question 110:

  An engineer uses the shutdown and no shutdown commands on a switch port that an access point is connected to because the AP had disassociated. These commands usually resolve the issue.

  Which troubleshooting methodology does this demonstrate?

  A. bottom-up
  B. top-down
  C. divide and conquer
  D. shoot from the hip
  D. shoot from the hip