Cisco 300-360 Online Practice Questions and Exam Preparation

Cisco 300-360 Online Questions & Answers

• Question 91:

  Which piece of information gathered during a WLAN site survey should be included in the customer report?

  A. Analysis of server location and applications supported.
  B. Analysis of fiber-optic backbone infrastructure.
  C. Output from Cisco WCS Location Quality Inspector.
  D. Output from Cisco WCS VoWLAN Voice Readiness Tool.
  E. Output from Cisco WCS Planning Mode Tool.
  E. Output from Cisco WCS Planning Mode Tool.

• Question 92:

  A network engineer is designing a high-density wireless network. To optimize client performance and avoid interference, which configuration must the engineer use?

  A. Deploy APs near each other for 5-GHz coverage, and enable the 2.4-GHz radios for all APs.
  B. Deploy APs near each other for 5-GHz coverage, and disable the 2.4-GHz radios for some APS.
  C. Deploy APs near each other for 2.4-GHz coverage, and disable the 5-GHz radios for some APS.
  D. Deploy APs near each other for 2.4-GHz coverage, and disable the 5-GHz radios for all APs.
  A. Deploy APs near each other for 5-GHz coverage, and enable the 2.4-GHz radios for all APs.

• Question 93:

  A hospital environment was designed to guarantee RF coverage at or better than -67 dBm in the 5 GHz spectrum. The customer mandates that RRM be used for DCA and TPC in both bands. After deployment, why do many of the legacy 802.11b/g devices have difficulty maintaining connectivity?

  A. Excessive co-channel interference in the 2.4 GHz band exists.
  B. Excessive overlapping channels in the 2.4 GHz band exists.
  C. TPC drastically reduces Tx power in the 2.4 GHz band.
  D. TCP drastically increases Tx power in the 2.4 GHz band.
  C. TPC drastically reduces Tx power in the 2.4 GHz band.

• Question 94:

  You are designing a wireless network that contains many different types of wireless clients. How do you conduct a survey to ensure a consistent experience for all of the wireless clients?

  A. by using the client that has the highest RF properties
  B. by using the client that is used most by the company
  C. by using a client of every different type
  D. by using the client that is used least by the company
  B. by using the client that is used most by the company

• Question 95:

  Which two best practices should be considered when a customer wants to purchase and implement Voice over Wireless for Cisco 7925 IP Phones? (Choose two.)

  A. Enable lower data rates for 2.4-GHz data WLAN and higher data rates for phones.
  B. Use a separate Cisco Wireless Lan Controller.
  C. Enable 802.1x and Cisco Centralized Key Management for phone authentication.
  D. Use dedicated Access Points only for Voice over Wireless.
  E. Set data for 2.4 GHz and voice for 5 GHz using separate SSIDs.
  C. Enable 802.1x and Cisco Centralized Key Management for phone authentication.
  E. Set data for 2.4 GHz and voice for 5 GHz using separate SSIDs.

• Question 96:

  Which two modifications to station behaviors were designed in the IEEE 802.11e protocol? (Choose two.)

  A. CFP
  B. HCCA
  C. EDCA
  D. PCF
  E. DCF
  B. HCCA
  C. EDCA

• Question 97:

  What is the optimal distance between APs for location services without considering the physical environment?

  A. 10 to 25 feet
  B. 90 to 120 feet
  C. 50 to 70 feet
  D. 80 to 100 feet
  C. 50 to 70 feet

  ---

  Reference: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob41dg/emob41dg-wrapper/ch13Loca.html

• Question 98:

  DRAG DROP

  Drag and drop the WMM designations from the left onto the correct 802.1P priority queues on the right.

  Select and Place:

  

  

• Question 99:

  You must optimize the 2.4GHz radio usage during the frequency planning of a high-density environment. Which step do you take to ensure that all of the clients can access the APs?

  A. Reduce the number of users per cell by adding additional APs
  B. Physically limit the propagation of wireless signals by using antennas and by the placement of the APs
  C. Limit the propagation of wireless signals by using a four-channel plan on neighboring APs where available
  D. Limit overlapping signals by using three non-overlapping channels
  D. Limit overlapping signals by using three non-overlapping channels

• Question 100:

  Which three parameters are used by Cisco Prime Infrastructure to generate heat maps? (Choose three.)

  A. the RSSI prediction model
  B. the AP SNR
  C. the bandwidth utilization
  D. the AP transmit power
  E. the antenna orientation
  F. the number of associated clients
  A. the RSSI prediction model
  D. the AP transmit power
  E. the antenna orientation

  ---

  An RF heatmap is a graphical representation of RF wireless data where the values taken by variables are represented in maps as colors. The current heatmap is computed based on the RSSI prediction model, Antenna Orientation, and AP transmit power. https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug/wireless-maps.html