Cisco 300-165 Online Practice Questions and Exam Preparation

Cisco 300-165 Online Questions & Answers

• Question 91:

  Which command activates the port security database for VSAN 1 regardless of conflicts?

  A. port-security commit vsan 1
  B. no port-security auto-learn vsan 1
  C. port-security activate vsan 1 force
  D. port-security database vsan 1
  C. port-security activate vsan 1 force

• Question 92:

  

  Refer to the exhibit. A multicast packet is received on Ethernet 1/1 and will exit Ethernet 1/2.

  Drag and drop the steps performed by the Cisco Nexus switch from the left into the correct order on the right.

  Select and Place:

  

  ---

  

• Question 93:

  During the design of a new Cisco Data Center Network, a customer asked when VM-FEX would be used with Cisco Nexus 1000V Switch. Which scenario is most appropriate?

  A. when a host must utilize a vSwitch and a distributed vSwitch
  B. when using Non-UCS Servers to provide virtualization services with Nexus FEX modules
  C. They are mutually exclusive of each other.
  D. when a Cisco UCS C-Series server requires Cisco Nexus 1000V Switch to provide VM connectivity
  C. They are mutually exclusive of each other.

• Question 94:

  You must configure Microsoft Network Load Balancing in unicast mode across OTV sites. Which OTV option do you enable?

  A. multihoming
  B. ARP local caching
  C. FHRP filtering
  D. selective unicast flooding
  D. selective unicast flooding

• Question 95:

  You are troubleshooting the SAN fabric. You must find the FCID to WWPN mapping for the N ports of a Cisco MDS Series switch. Which two commands can you run? (Choose two.)

  A. show flogi database
  B. show vsan
  C. show fcip summary
  D. show fcns database
  E. show fspf database
  A. show flogi database
  D. show fcns database

• Question 96:

  

  Refer to the exhibit. Which command should you run on a Cisco MDS 9000 Series switch to produce the output?

  A. show fabric-binding database active
  B. show port-security database active
  C. show fabric-binding database
  D. show port-security database
  B. show port-security database active

  ---

  Reference: https://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a00805ed01e.html

• Question 97:

  When a local RBAC user account has the same name as a remote user account on an AAA server, what happens when a user with that name logs into a Cisco Nexus switch?

  A. The user roles from the remote AAA user account are applied, not the configured local user roles.
  B. All the roles are merged (logical OR).
  C. The user roles from the local user account are applied, not the remote AAA user roles.
  D. Only the roles that are defined on both accounts are merged (logical AND).
  C. The user roles from the local user account are applied, not the remote AAA user roles.

  ---

  If you have a user account configured on the local Cisco NX-OS device that has the same name as a remote user account on an AAA server, the Cisco NX-OS software applies the user roles for the local user account to the remote user, not the user roles configured on the AAA server. http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_nx-os-cfg/sec_rbac.html

• Question 98:

  DRAG DROP

  Select and Place:

  

  

• Question 99:

  

  Refer to the exhibit. Which statement about the configured LACP parameters is true?

  A. Ports 3 and 4 on NEXUS1 run LACP
  B. NEXUS1 load balances traffic by using the source and destination MAC addresses
  C. NEXUS2 uses the default LACP system priority
  D. NEXUS1 uses the default LACP system priority
  C. NEXUS2 uses the default LACP system priority

• Question 100:

  Instructions

  This task does not require device configuration.

  Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required.

  To access the multiple-choice questions, click the numbered boxes on the left of the top panel.

  There are four multiple-choice questions with this task.

  Scenario

  Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. Click Nexus5548 icon to run show commands and answer the questions.

  

  

  What is the status of FC interface associated with ethernet 1/5 indicate?

  A. Trank VSAN 11 is isolated
  B. Interface vfc 5 is up and running for the assigned VSAN
  C. Trunk VSAN 11 is initializing
  D. VSAN to FC mapping is not working as expected
  B. Interface vfc 5 is up and running for the assigned VSAN