Cisco 300-080 Online Practice Questions and Exam Preparation

Cisco 300-080 Online Questions & Answers

• Question 131:

  Refer to the exhibit. How many high-complexity transcoding sessions can this Cisco ISR G2 support?

  

  A. 21
  B. 14
  C. 60
  D. 15
  B. 14

• Question 132:

  An engineer is configuring a new conference resource on a Cisco 2911 ISR router. The router has a single PVDM3-32 and one PRI with 23 voice channels. When the engineer configured the conference profile on the router, the following

  message is received.

  Vr-2911-east(config)#dspfarm profile 10 conferenceDspfarm profile 10 :: No resource, check voice card or dspfarm service is not configured

  Which configuration should the engineer add before adding the conference bridge profile?

  A. voice-card 0 dsp services dspfarm dspfarm
  B. voice-card 0 codec complexity medium dsp services dspfarm
  C. voice-card 0 codec complexity flex dsp services dspfarm
  D. voice-card 0 dsp tdm pooling dspfarm
  A. voice-card 0 dsp services dspfarm dspfarm

• Question 133:

  An Engineer notices that some SCCP phones are not displaying the correct time, but the phones are registered and working properly. Which three options should be performed in Cisco Unified Communications Manager to fix the phone time issue? (Choose three)

  A. Verify that device pool has the correct Date/Time group configured.
  B. Ensure that the phone on Time field on the phone configuration page is chosen.
  C. Check the CUCM OS Admin page to ensure that NTP servers are accessible.
  D. Verify that the date/Time group has the correct phone NTP reference configured.
  E. Check the phone NTP reference configuration for configured servers.
  F. Verify that the date/time group has the correct time zone configured.
  A. Verify that device pool has the correct Date/Time group configured.
  C. Check the CUCM OS Admin page to ensure that NTP servers are accessible.
  F. Verify that the date/time group has the correct time zone configured.

• Question 134:

  When the command utils dbreplication status is executed on the Cisco Unified Communications Manager CLI, which step should be taken next to check the database replication status?

  A. View the activelog file.
  B. Run the same command on all nodes of the cluster.
  C. Restart the Cisco CallManager service.
  D. The command utils dbreplication runtimestate must be run on the publisher.
  E. The command utils dbreplication runtimestate must be run on the subscriber.
  A. View the activelog file.

• Question 135:

  Cisco TelePresence Systems that are calling from a Cisco Unified Communications Manager cluster to an

  A. 323 registered device on a Cisco Expressway Control do not work. However, calls from the H.323 Expressway registered devices to the same Cisco Unified Communications Manager registered systems do work. What are two possible reasons? (Choose two.)
  B. The SIP trunk has not enabled bidirectional mode.
  C. The call from Cisco Unified Communications manager to the Cisco Expressway Control does not match any search rule.
  D. Calls from Cisco Unified Communications Manager add ".5060" or ".5061" after the SIP address, unlike the Cisco Expressway Control.
  E. The Cisco Expressway Control is registered in the wrong partition.
  F. Both systems do not support TLS encryption
  A. 323 registered device on a Cisco Expressway Control do not work. However, calls from the H.323 Expressway registered devices to the same Cisco Unified Communications Manager registered systems do work. What are two possible reasons? (Choose two.)
  C. The call from Cisco Unified Communications manager to the Cisco Expressway Control does not match any search rule.

• Question 136:

  You have 50 hardware MTP resources and 200 software MTP resources. You want to use hardware resources first, but software is being used first. Where can you confirm the MTP selection order?

  A. Media Resource Group List
  B. Cisco Unified Real-Time Monitoring Tool
  C. MTP list
  D. phone device pool
  E. calling search space
  F. MGCP gateway
  A. Media Resource Group List

• Question 137:

  

  Refer to the exhibit. When a Cisco Unified Communications Manager Express advertises the directory number pattern in the exhibit, what would the learned pattern be in the RTMT tool on the Cisco Unified Communications Manager?

  A. 4XXX and the ToDID will be 0:+1972555
  B. 4XXX and the ToDID will be 0:+19725554XXX
  C. 4XXX and the ToDID will be 0:19725554XXX
  D. 4XXX and the ToDID will be 0:1972555
  E. 19725554XXX and the ToDID will be 0:+1972555
  D. 4XXX and the ToDID will be 0:1972555

• Question 138:

  Refer the exhibit. An engineer is troubleshooting a SAF client that is not registering with the SAF forwarder. What is the root cause of the issue?

  

  A. the packets are being corrupted on the network
  B. the SAF password is incorrectly configured
  C. the SAF port is incorrectly configured
  D. the client SAF label is incorrectly configured
  E. the packets are being dropped on the network
  E. the packets are being dropped on the network

• Question 139:

  Where in Cisco TMS would you see if a system is registered to a Cisco VCS or a Cisco Unified Communications Manager?

  A. Systems > Registration
  B. Navigation > Systems > Registrations
  C. under Registration on the System Administration tab
  D. System Overview
  E. Settings > Provisioning
  F. where you start the Cisco Unified Communications Manager RTMT under Systems and Reports
  D. System Overview

• Question 140:

  Which two tools can be used to collect log files for advanced troubleshooting of call setup failures? (Choose two.)

  A. Cisco Unified Realtime Monitoring Tool for Communications Manager servers
  B. Dialed Number Analyzer on Communications servers
  C. CLI of Communications Manager servers
  D. Cisco Prime Collaboration Provisioning server
  E. Cisco Call Analyzer for Communications Manager Publisher servers
  A. Cisco Unified Realtime Monitoring Tool for Communications Manager servers
  D. Cisco Prime Collaboration Provisioning server