Cisco 200-355 Online Practice Questions and Exam Preparation

Cisco 200-355 Online Questions & Answers

• Question 491:

  Drag and drop the security option from the left onto the correct WLC WLAN security mechanism on the right.

  Select and Place:

  

  

• Question 492:

  An access point named Cisco AP is configured on a wireless controller. Which command must you use in the controller to view access point system messages?

  A. show ap eventlog Cisco_AP
  B. debug ap eventlog Cisco_AP
  C. config logging Cisco_AP
  D. show logging
  A. show ap eventlog Cisco_AP

• Question 493:

  DRAG DROP

  Drag and drop the WLC physical ports from the left onto the correct description on the right.

  Select and Place:

  

  

• Question 494:

  Which two of the following authentication methods used for WiFi security require the use of certificates? (Choose two.)

  A. PEAP
  B. EAP-FAST
  C. WPA2
  D. WPA1
  E. EAP-TLS
  F. EAP-MD5
  A. PEAP
  E. EAP-TLS

  ---

  When you use EAP with a strong EAP type, such as TLS with smart cards or TLS with certificates, both the client and the server use certificates to verify their identities to each other. Certificates must meet specific requirements both on the server and on the client for successful authentication. https://support.microsoft.com/en-us/kb/814394

• Question 495:

  Drag the description from the left and drop it on the name of the wireless LAN controller interface that it descibes on the right.

  Select and Place:

  

  

• Question 496:

  Which option is used to form the BSSID in a BSS?

  A. AP radio MAC address
  B. AP wired MAC address
  C. AP serial number
  D. client radio MAC address
  E. client wired MAC address
  F. client serial number
  A. AP radio MAC address

• Question 497:

  A wireless network administrator wants an employee to be able to create guest user accounts on the WLC, without having access to other features. Which type of account must be created?

  A. Lobby Supervisor
  B. Lobby Ambassador
  C. Lobby Administrator
  D. Lobby Assistant
  B. Lobby Ambassador

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0MR1/configuration/guide/wlc_cg70MR1/cg_user_accts.pdf

• Question 498:

  Instructions:

  1.

  THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION

  2.

  To access the multiple-choice questions, click on the numbered box on the left of the top panel.

  3.

  There is one multiple-choice question with this task. Be sure to answer the question before selecting the Next button

  Scenario:

  A wireless LAN controller, AP, IOS switch, and wireless client have been properly configured. Use the exhibits to answer the question.

  

  

  When a client associates to ExamSSlD, which network address will be assigned?

  A. The IP address assigned will be based on the AP network assignment of 10.10.10.0.
  B. The IP address assigned will be based on the AP network assignment of 172.16.23.0.
  C. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 172.16.23.0,192.168.14.0 address pools.
  D. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 192.168.14.0,192.168.25.0 pools.
  E. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 172.16.23.0,192.168.14.0,192.168.25.0 pools.
  D. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 192.168.14.0,192.168.25.0 pools.

  ---

  The IP addresses will be assigned round robin to the three interface groups, which we can see are vlan20, vlan40, and vlan50. From the WLC-interfaces tab we see that the IP addresses assigned to these 3 interfaces are 172.16.12.10, 172.16.14.10, and 192.168.25.10, respectively.

• Question 499:

  Which color and status of the LED indicate that at least one client is connected to a Cisco 2702 series access point?

  A. solid blue
  B. blinking blue
  C. solid red
  D. solid green
  A. solid blue

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/wireless/access_point/2700/quick/guide/ap2700getstart.html

• Question 500:

  Which option describes why most wireless phones and tablets do not use 802.11a/n and 40 MHz channels?

  A. a lack of radio range when using these radios
  B. a lack of device battery capacity to operate concurrent a/b/g/n radios
  C. a lack of cooling in the device necessary to operate these radios
  D. These radios would require the devices to be larger.
  B. a lack of device battery capacity to operate concurrent a/b/g/n radios