Cisco 200-355 Online Practice Questions and Exam Preparation

Cisco 200-355 Online Questions & Answers

• Question 1:

  Drag the feature descriptions from the left and drop them onto the corresponding AP operational mode names on the right.

  Select and Place:

  

  

• Question 2:

  What is the difference between the IEEE, the WiFi Alliance, and the FCC, ETSI, and TELEC?

  A. The IEEE and FCC are responsible for the standards that apply to wireless networks. The WiFi Alliance, ETSI, and TELEC are the governmental agencies that regulate compliance with local standards.
  B. The IEEE is responsible for Layer 1 and Layer 2 protocols. The WiFi Alliance is responsible for interoperability testing. The FCC, ETSI, and TELEC are responsible for radio frequency and transmission power-level regulations and standards in the U.S., Europe, and Japan.
  C. The IEEE is responsible for Layer 1 and Layer 2 protocols. The FCC, ETSI, and TELEC are responsible for interoperability testing and compliance. The WiFi Alliance is responsible for radio frequency and transmission power-level regulations and standards on a global basis.
  D. The IEEE and FCC are responsible for the Layer 3 protocol support and frequency and power- level regulations in the United States. ETSI and TELEC are responsible for frequency and power- level regulations in Europe and Japan. The WiFi Alliance is responsible to interoperability testing.
  B. The IEEE is responsible for Layer 1 and Layer 2 protocols. The WiFi Alliance is responsible for interoperability testing. The FCC, ETSI, and TELEC are responsible for radio frequency and transmission power-level regulations and standards in the U.S., Europe, and Japan.

  ---

  The FCC is the local regulatory authority responsible for frequency regulation in the United States. ETSI is a European standards organization responsible for producing standards for information and communications technologies. The Wi-Fi Alliance is an interoperability testing organization. The IEEE creates standards, and WPA is a pre-802.11 certification by the Wi-Fi Alliance.

• Question 3:

  A customer has a corporate SSID that is configured to authenticate against an ACS server to validate client credentials on the corporate SSID. The customer has a firewall logically positioned on the network between the WLC and the ACS server in the network architecture. Which port must the firewall allow to ensure that authentication can occur?

  A. 43
  B. 1812
  C. 5146
  D. 8143
  B. 1812

• Question 4:

  Which two statements about the results of the Cisco WCS version 7.0 client troubleshooting tool are true? (Choose two.)

  A. Results of Layers 1 - 3 are provided.
  B. Results of only Layers 2 and 3 are provided.
  C. Results of Layers 4 - 7 are provided.
  D. The tabulated results vary depending on the client type.
  E. Results are provided in a fixed four-part tabulation.
  F. Results are provided in a fixed six-part tabulation.
  A. Results of Layers 1 - 3 are provided.
  D. The tabulated results vary depending on the client type.

• Question 5:

  A customer is converting from a FlexConnect solution to a converged access solution at a remote facility. The facility currently supports 500 users with 45 access points, so he is planning to install only one switch. What switch would need to be implemented to support the new converged access methodology?

  A. Cisco 4500 Series Switch
  B. Cisco 6800 Series Switch
  C. Cisco 3850 Series Switch
  D. Cisco 3650 Series Switch
  B. Cisco 6800 Series Switch

• Question 6:

  Refer to the exhibit.

  

  Which option is the received signal power level at the receiver?

  A. -46
  B. -49.28
  C. -45
  D. -40.72
  C. -45

• Question 7:

  A customer has requested a single point of policy enforcement for LAN and WLAN. Which deployment model should be used?

  A. converged
  B. autonomous
  C. FlexConnect
  D. centralized
  A. converged

• Question 8:

  Which join process is performed when a Windows client initially attempts to connect to a wireless network?

  A. The machine transmits probes that contain an ad hoc advertisement request for SSID name
  B. The machine transmits beacon requests that contain a null or empty SSID name
  C. The machine transmits probe requests that contain a null or empty SSID name
  D. The machine transmits beacons that contain an ad hoc advertisement request for SSID name
  C. The machine transmits probe requests that contain a null or empty SSID name

• Question 9:

  An AP has been configured for personal wireless access to the Internet using appropriate security and cloaking. Which two items should be configured on the wireless client? (Choose two.)

  A. RF channel
  B. BSS
  C. PSK
  D. 802.1X/EAP
  E. broadcast SSID
  F. manual SSID
  G. IBSS
  C. PSK
  F. manual SSID

  ---

  Neighboring APs offering the same connection type and parameters use the same name, or service set identifier (SSID, which is a simple ASCII string providing a name to the connection). Neighboring APs offering the same connection use the same SSID, but each AP identifies itself by associating its radio MAC address to the SSID string. This associated MAC address is called the basic service set identifier (BSSID), and it enables stations to know which AP offers which SSID.

• Question 10:

  An engineer wants to have users who connect to a WLAN be redirected to a terms-of-service page with the company logo and a login. What should be configured on the WLAN to enable this capability?

  A. Layer 2 IEEE 802.1x
  B. Web Policy Slash Page Web Redirect
  C. Web Policy Authentication
  D. AAA Servers
  E. Web Policy Passthrough
  C. Web Policy Authentication