Cisco 200-355 Online Practice Questions and Exam Preparation

Cisco 200-355 Online Questions & Answers

• Question 591:

  An AP has been configured for personal wireless access to the Internet. Which item should be configured on the wireless client?

  A. RF channel
  B. BSS
  C. PSK
  D. 802.1X/EAP
  E. broadcast SSID
  F. IBSS
  C. PSK

  ---

  Using Pre-shared keys (PSK) is the easiest and best method for allowing Internet access to a wireless client using an access point.

• Question 592:

  Refer to the exhibit.

  

  In an effort to identify RF characteristics at a customer location, an RF engineer uses the Spectrum Analyzer tool that is shown. Which feature that is native to the Spectrum Analyzer is identified by the exhibit?

  A. Real-Time FFT
  B. Duty Cycle
  C. Max Hold
  D. Time Domain
  A. Real-Time FFT

• Question 593:

  Engineer needs an LAP to support few WLANs with different DHCP servers for different SSIDs, how to fulfill this requirement?

  A. configuring dynamic VLAN interfaces to SSIDs in AP group.
  B. configure DHCP in AP settings advanced page
  A. configuring dynamic VLAN interfaces to SSIDs in AP group.

• Question 594:

  Which Cisco AnyConnect module provides wireless connectivity?

  A. telemetry
  B. web security
  C. VPN
  D. NAM
  E. DART
  F. posture
  G. CSSC
  D. NAM

  ---

  The Cisco AnyConnect Secure Mobility Client is a multifunctional and modular security client. It was built to enable you to use the same interface across various hardware and software platforms (operating systems) to manage and secure

  your connections to the network. It contains several modules:

  The main components used in IUWNE are the Cisco AnyConnect Mobility Client itself, associated with the Network Access Module (NAM) used to manage existing profiles and provide the wireless connectivity.

• Question 595:

  Why would you deploy multiple access points in an office area?

  A. to implement seamless roaming between access points
  B. to improve wireless security
  C. to deploy multiple SSIDs
  D. to avoid channel overlap
  A. to implement seamless roaming between access points

• Question 596:

  When creating a wireless profile in the Cisco ADU and you have selected the WPA/WPA2/CCKM radio button option, what other decision must you make and then configure on this same screen?

  A. the address and the server secret of the authentication device you will authenticate with
  B. the encryption type
  C. the EAP type to be used for authentication
  D. the length and value of the pre-shared key
  E. the SSID of the wireless client
  C. the EAP type to be used for authentication

• Question 597:

  An autonomous AP maps the SSID to what on the wired network?

  A. BSSID
  B. VLAN
  C. QoS tag
  D. SG tag
  B. VLAN

• Question 598:

  Which statement describes a security weakness of a WPA2 with a PSK?

  A. The compromised key can be used for another connection.
  B. The key can be eavesdropped from the wireless medium.
  C. The key can be recreated from a few eavesdropped frames.
  D. The key is not case-sensitive and is vulnerable to compromise by brute-force methods.
  A. The compromised key can be used for another connection.

  ---

  WPA2-Enterprise is (in my opinion) considerably more secure than PSK.

• Question 599:

  What are the characteristic of 2.4Ghz? (Choose three.)

  A. total 1 to 11 channels are available
  B. total 1 to 14 channels are available
  C. fcc allowed 1 to 11 channels
  D. fcc allowed 1 to 14 channels
  E. max 100mw power allowed on CCK F. max 100mw power allowed on OFDM
  B. total 1 to 14 channels are available
  C. fcc allowed 1 to 11 channels
  E. max 100mw power allowed on CCK F. max 100mw power allowed on OFDM

• Question 600:

  Which three statements must be true for Cisco WLCs to support roaming? (Choose three.)

  A. Controllers are in the same mobility group.
  B. Controllers operate in different LWAPP modes.
  C. ACLs are the same.
  D. Virtual interface IP addresses are the same.
  E. Controllers have different versions of code.
  F. Controllers need to have the same hostname.
  A. Controllers are in the same mobility group.
  D. Virtual interface IP addresses are the same.
  F. Controllers need to have the same hostname.