Cisco 200-355 Online Practice Questions and Exam Preparation

Cisco 200-355 Online Questions & Answers

• Question 511:

  Which type of survey is based on listening to the APs that are already deployed?

  A. passive
  B. planning
  C. active
  D. predictive
  A. passive

• Question 512:

  What is an MBSSID?

  A. a virtual AP configured on a physical AP that share a single physical device, which is one half-duplex radio
  B. a set of physical APs configured in a BSA to form cells that are controlled by a single controller
  C. the group of clients that are allowed to gain access to one or more SSIDs configured in an AP
  D. the identified overlap area between two cells, which identifies the clients that are operating in that area at any given time
  A. a virtual AP configured on a physical AP that share a single physical device, which is one half-duplex radio

  ---

  Some APs can offer only one SSID per radio. Other APs have a slot of MAC addresses available and can support several SSIDs per radio, using Multiple BSSIDs (MBSSID). MBSSIDs basically are virtual APs that still share the same physical device, which has a half-duplex radio. MBSSIDs are a way to differentiate the traffic reaching the AP, not a way to increase the capacity of the AP.

• Question 513:

  Which three parameters must be configured for local EAP-FAST on the controller? (Choose three.)

  A. PAC
  B. client key
  C. NTP source
  D. TTL for PAC
  E. server key
  F. authority ID and information
  D. TTL for PAC
  E. server key
  F. authority ID and information

• Question 514:

  You are on the phone working with a colleague that is console connected to a lightweight AP that has lost its configuration. Which three actions are necessary to allow the AP to connect to a controller? (Choose three.)

  A. Configure the AP IP address.
  B. Configure the controller name.
  C. Configure the controller IP address.
  D. Configure the AP hostname.
  E. Configure the AP IP default-gateway.
  F. Configure the AP username and password.
  A. Configure the AP IP address.
  C. Configure the controller IP address.
  E. Configure the AP IP default-gateway.

  ---

  In order to manually configure static information on a LAP using the AP CLI interface, you can use these EXEC mode CLI commands:

  AP#capwap ap ip address

  AP#capwap ap ip default-gateway

  AP#capwap ap controller ip address

  AP#capwap ap hostname

  (optional)

  Notice the first 3 are needed for the AP to connect to the controller; the last step is optional and not needed for basic connectivity to the controller.

  http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/99763-reset-lwappconfig-lap.html

• Question 515:

  How are application-specific devices differentiated from laptop computers in the way they support Cisco Compatible Extensions?

  A. ASDs are required to support only Cisco Compatible Extensions v1 and v2 features. Laptops must support all Cisco Compatible Extensions features.
  B. ASDs are required to support only Cisco Compatible Extensions v5 management features, while laptops are required to support optional features.
  C. Several features that are required for laptops are not required for ASDs.
  D. There is no differentiation. ASDs and laptops must both support the same Cisco Compatible Extensions features.
  C. Several features that are required for laptops are not required for ASDs.

  ---

  In each version of CCX some features are classified as optional for ASDs. Examples of ASDs are medical devices, mobile computers, smartphones, and printers. The CCX specification for ASDs is a subset of the CCX specification for laptops. Some CCX features are not required for ASDs because many ASDs lack the computing power or operating system foundation required to support the features. http://incenter.medical.philips.com/doclib/enc/ fetch/2000/4504/577242/577243/577246/581601/711562/The_Value_of_CCX_for_Philips_PageWriter_Cardiographs.pdf%3fnodeid%3d5784998%26vernum%3d1

• Question 516:

  You run minimum PEAP-GTC authentication in your wireless environment. Which version of Cisco Compatible Extensions supports PEAP-GTC?

  A. Cisco Compatible Extensions v1
  B. Cisco Compatible Extensions v2
  C. Cisco Compatible Extensions v3
  D. Cisco Compatible Extensions v4
  E. Cisco Compatible Extensions v5
  B. Cisco Compatible Extensions v2

  ---

  PEAP/GTC is supported on Cisco Compatible Version 2 clients and above. http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1300-series/prod_qas09186a00802030dc.html

• Question 517:

  Which CLI command shows the controller configuration in a way that is similar to the way that it is displayed on Cisco IOS routers?

  A. show config
  B. show run config
  C. show run-config
  D. show running config
  E. show running-config
  E. show running-config

• Question 518:

  Which Cisco AnyConnect module allows troubleshooting for core AnyConnect problems?

  A. telemetry
  B. web security
  C. VPN
  D. NAM
  E. DART
  F. posture
  G. CSSC
  E. DART

  ---

  AnyConnect offers the DART module that can be used to analyze and troubleshoot connections. The information collected by DART can be examined locally or exported and sent to a network support desk for analysis.

• Question 519:

  Which Converged Access option on a WLC must you configure to maintain a client database under a complete mobility domain?

  A. mobility group
  B. mobility agent
  C. mobility oracle
  D. mobility controller
  C. mobility oracle

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_010100.html

• Question 520:

  When making a wired network connection to a lightweight access point in local mode, that provides wireless association to multiple SSIDs, what is the recommended Ethernet switch port configuration?

  A. switchport mode dynamic auto
  B. switchport mode access
  C. switchport mode trunk
  D. switchport mode dynamic desirable
  C. switchport mode trunk