Cisco 200-301 Online Practice Questions and Exam Preparation

Cisco 200-301 Online Questions & Answers

• Question 811:

  When a switch receives a frame for a known destination MAC address, how is the frame handed?

  A. sent to the port identified for the known MAC address
  B. broadcast to all ports
  C. forwarded to the first available port
  D. flooded to all ports except the one from which it originated
  A. sent to the port identified for the known MAC address

• Question 812:

  How is noise defined in Wi-Fi?

  A. measured difference between the desired Wi-Fi signal and an interfering Wi-Fi signal
  B. any interference that is not Wi-Fi traffic that degrades the desired signal
  C. signals from other Wi-Fi networks that interfere with the local signal
  D. ratio of signal-to-noise rating supplied by the wireless device
  B. any interference that is not Wi-Fi traffic that degrades the desired signal

• Question 813:

  DRAG DROP

  Refer to the exhibit.

  

  A packet is destined for 192.168.20.108. Drag and drop the parameters of the destination route from the left onto the routing table components they represent on the right. Not all parameters are used.

  Select and Place:

  

  

• Question 814:

  Which protocol is used for secure remote CLI access?

  A. HTTPS
  B. HTTP
  C. Telnet
  D. SSH
  D. SSH

• Question 815:

  What is a characteristic of an SSID in wireless networks?

  A. allows easy file sharing between endpoints
  B. identifies a wireless network
  C. eliminates network piggybacking
  D. requires the use of PoE for functionality
  B. identifies a wireless network

• Question 816:

  Which protocol uses the SSL?

  A. HTTP
  B. SSH
  C. HTTPS
  D. Telnet
  C. HTTPS

  ---

  HTTPS (port 443, TCP): HTTPS combines HTTP with a security protocol (Secure Sockets Layer [SSL]/Transport Layer Security[TLS]). DNS (port 53, TCP, and UDP): DNS is used to resolve Internet names to IP addresses.

• Question 817:

  An Ethernet frame arrived at switch interface G0/1, but the destination MAC address is missing from the MAC address table. How does the switch process the frame?

  A. It sends an ARP request to attempt to locate the destination
  B. It updates the destination to FFFF.FFFF.FFFF.
  C. It drops the frame and notifies the sending host.
  D. It floods the frame out of the remaining switch interfaces.
  D. It floods the frame out of the remaining switch interfaces.

• Question 818:

  How does MAC learning function?

  A. enabled by default on all VLANs and interfaces
  B. increases security on the management VLAN
  C. sends frames with unknown destinations to a multicast group
  D. inspects and drops frames from unknown destinations
  A. enabled by default on all VLANs and interfaces

  ---

  This statement is the most accurate regarding MAC learning. MAC learning is a fundamental function of Layer 2 switches and is enabled by default on all interfaces. When a switch receives frames on its interfaces, it learns the source MAC addresses and associates them with the corresponding interface.

• Question 819:

  In software-defined architecture, which place handles switching for traffic through a Cisco router?

  A. Control
  B. Management
  C. Data
  D. application
  C. Data

  ---

  Data plane-Handles all the data traffic. The basic functionality of a Cisco NX-OS device is to forward packets from one interface to another. The packets that are not meant for the switch itself are called the transit packets. These packets are handled by the data plane

• Question 820:

  Refer to the exhibit.

  

  The P2P blocking action option is disabled on the WLC.The security team has a new requirement for each client to retain their assigned IP addressing as the clients move between locations in the campus network. Which action completes this configuration?

  A. Enable the Static IP Tunneling option.
  B. Disable the Coverage Hole Detection option.
  C. Check the DHCP Addr. Assignment check box.
  D. Set the P2P Blocking Action option to Forward-UpStream.
  A. Enable the Static IP Tunneling option.

  ---

  Static IP Tunneling - allows clients to travel between different WLC on the network and retain connectivity even if the static ip is in a different subnet.

  https://mrncciew.com/2013/03/25/static-ip-clients-mobility/