Cisco 200-301 Online Practice Questions and Exam Preparation

Cisco 200-301 Online Questions & Answers

• Question 1631:

  Which two pieces of information about a Cisco device can Cisco Discovery Protocol communicate? (Choose two.)

  A. the native VLAN
  B. the trunking protocol
  C. the VTP domain
  D. the spanning-tree priority
  E. the spanning tree protocol
  A. the native VLAN
  C. the VTP domain

  ---

  Ref: Cisco Discovery Protocol Configuration Guide, Cisco IOS Release 15MandT

  "C H A P T E R 1 Cisco Discovery Protocol Version 2 ... Cisco Discovery Protocol ... The information contained in Cisco Discovery Protocol advertisements varies based on the type of device and the installed version of the operating system. Some of the information that Cisco Discovery Protocol can learn includes:

  1. Cisco IOS version running on Cisco devices

  2. Hardware platform of devices

  3. IP addresses of interfaces on devices

  4. Locally connected devices advertising Cisco Discovery Protocol

  5. Interfaces active on Cisco devices, including encapsulation type

  6. Hostname

  7. Duplex setting

  8. VLAN Trunking Protocol (VTP) domain

  9. Native VLAN ..."

• Question 1632:

  Which protocol should be used to transfer large files on a company intranet that allows TCP 20 and 21 through the firewall?

  A. SMTP
  B. REST API
  C. TFTP
  D. FTP
  D. FTP

• Question 1633:

  Refer to the exhibit. Which two commands must be configured on router R1 to enable the router to accept secure remote-access connections? (Choose two)

  

  A. transport input telnet
  B. crypto key generate rsa
  C. ip ssh pubkey-chain
  D. login console
  E. username cisco password 0 Cisco
  B. crypto key generate rsa
  C. ip ssh pubkey-chain

• Question 1634:

  Which protocol enables secure file transfer using encryption over TCP?

  A. FTP
  B. TFTP
  C. SCP
  D. SNMP
  C. SCP

  ---

  Secure Copy Protocol (SCP) uses SSH to securely transfer files over an encrypted TCP connection. It protects both authentication credentials and data in transit.

• Question 1635:

  Refer to the exhibit.

  

  An access list is required to permit traffic from any host on interface G0/0 and deny traffic from interface G/0/1.

  Which access list must be applied?

  A. ip access-list standard 99 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.0.255.255
  B. ip access-list standard 99 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.255.255.255
  C. ip access-list standard 199 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.255.255.255
  D. ip access-list standard 199 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.0.255.255
  A. ip access-list standard 99 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.0.255.255

  ---

  Standard ACL's use the range of 1-99. Since we are only specifying a source, just a simple standard ACL is used. The subnet mask on the second ACL line on choice B is incorrect, making A correct.

• Question 1636:

  Which port type supports the spanning-tree portfast command without additional configuration?

  A. access ports
  B. Layer 3 main Interfaces
  C. Layer 3 suninterfaces
  D. trunk ports
  A. access ports

• Question 1637:

  Refer to the exhibit. When running EIGRP, what is required for RouterA to exchange routing updates with RouterC?

  

  A. AS numbers must be changed to match on all the routers
  B. Loopback interfaces must be configured so a DR is elected
  C. The no auto-summary command is needed on Router A and Router C
  D. Router B needs to have two network statements, one for each connected network
  A. AS numbers must be changed to match on all the routers

  ---

  This question is to examine the understanding of the interaction between EIGRP routers. The following information must be matched so as to create neighborhood. EIGRP routers to establish, must match the following information:

  1. AS Number;

  2. K value.

• Question 1638:

  DRAG DROP

  Refer to the exhibit.

  

  Drag and drop the routing table components on the left onto the corresponding letter from the exhibit on the right.not all options are used.

  Select and Place:

  

  

• Question 1639:

  Refer to the exhibit.

  

  After configuring a new static route on the CPE. the engineer entered this series of commands to verify that the new configuration is operating normally. When is the static default route installed into the routing table?

  A. when 203 0 113.1 is no longer reachable as a next hop
  B. when the default route learned over external BGP becomes invalid
  C. when a route to 203.0 113 1 is learned via BGP
  D. when the default route over external BGP changes its next hop
  B. when the default route learned over external BGP becomes invalid

• Question 1640:

  What is the purpose of an SSID?

  A. It provides network security
  B. It differentiates traffic entering access posits
  C. It identities an individual access point on a WLAN
  D. It identifies a WLAN
  D. It identifies a WLAN

  ---

  In IEEE 802.11 wireless local area networking standards (including Wi-Fi), a service set is a group of wireless network devices which share a service set identifier (SSID) ... A service set forms a logical network of nodes operating with shared link-layer networking parameters; they form one logical network segment.