Cisco 200-150 Online Practice Questions and Exam Preparation

Cisco 200-150 Online Questions & Answers

• Question 341:

  Which advantage does the bidirectional Cisco QSFP 40-Gbps BiDi transceiver provide?

  A. It supports link lengths up to 10 km over single-mode fiber with duplex line card connectors.
  B. It supports a breakout connection with a 40-gigabit QSFP port on one end that connects to four 10-gigabit SFP+ ports on the other end.
  C. It provides dedicated fabric-extender transceiver modules that connect to fabric links (that is, links between a fabric extender and a parent switch).
  D. It enables the reuse of the existing 10-gigabit duplex MMF infrastructure for migration to 40 Gigabit Ethernet connectivity.
  D. It enables the reuse of the existing 10-gigabit duplex MMF infrastructure for migration to 40 Gigabit Ethernet connectivity.

• Question 342:

  Which statement is true regarding FIP in FCoE enabled Storage Area Networks?.

  A. It discovers and initializes converged network capable devices connected to an Ethernet cloud.
  B. it uses a dedicated EtherType of 0xFFFF.
  C. it reduces the number of network interface cards required to connect to disparate storage and IP networks.
  D. It reduces the number of cables and switches.
  A. It discovers and initializes converged network capable devices connected to an Ethernet cloud.

• Question 343:

  On a Cisco Nexus switch, you need to configure an ACL that denies only SSH traffic from any source to host 10.68.68.68.

  Which command should you use?

  A. switch(config)#access-list 101 deny tcp any host 10.168.68.68 eq 22 switch(config)#access-list 101 permit ip any any
  B. switch(config)# access-list 101 deny tcp any host 10.68.68.68 eq 22
  C. switch(config)# ip access-list test switch(config-acl)# deny tcp any host 10.68.68.68 eq 22
  D. switch(config)# ip access-list test switch(config-acl)# deny tcp any host 10.68.68.68 eq 22 switch(config-acl)# permit ip any any
  D. switch(config)# ip access-list test switch(config-acl)# deny tcp any host 10.68.68.68 eq 22 switch(config-acl)# permit ip any any

• Question 344:

  How many layers are present in the OSI layer model versus the TCP/IP model?

  A. five layers in OSI and six layers in TCP/IP
  B. six layers in OSI and three layers in TCP/IP
  C. four layers in OSI and seven layers in TCP/IP
  D. seven layers in OSI and four layers in TCP/IP
  C. four layers in OSI and seven layers in TCP/IP

• Question 345:

  Which two descriptions of the WWWNNs on a server that has two physical HBAs are true? (Choose two.)

  A. All WWNNs are identical.
  B. Each WWNN is globally unique.
  C. There are four WWNNs.
  D. Each WWNN is locally unique.
  E. There are two WWNNs.
  B. Each WWNN is globally unique.
  E. There are two WWNNs.

• Question 346:

  Which protocol is used to encapsulate Fibre Channel frames, enabling them to be transmitted over Ethernet networks?

  A. FCoE
  B. DCB
  C. SCSI
  D. Ethernet SAN
  A. FCoE

• Question 347:

  

  Refer to the exhibit. Which command allows the Cisco Nexus 5000 switch to continue to start up?

  A. switch(boot)# load n5000-uk9.5.2.1.N1.4.bin
  B. switch(boot)# configure terminalswitch(boot-config)# admin-password Cisco123
  C. switch(boot)# load n5000-uk9-kickstart.5.2.1.N1.4.bin
  D. switch(boot)# load system-latest
  A. switch(boot)# load n5000-uk9.5.2.1.N1.4.bin

• Question 348:

  Which two protocols can you use for SAN storage that is accessed via low-latency, high-bandwidth networking? (Choose two.)

  A. AFP
  B. CIFS
  C. NFS
  D. FCP
  E. iSCSI
  D. FCP
  E. iSCSI

• Question 349:

  In Cisco NX-OS Software, which command redistributes a route of 0.0.0.0/0 into EIGRP?

  A. default-information originate
  B. default information originate
  C. default information-originate
  D. originate default-information
  E. originate-default information
  A. default-information originate