Cisco 200-150 Online Practice Questions and Exam Preparation

Cisco 200-150 Online Questions & Answers

• Question 301:

  

  Refer to the exhibit. What two commands will allow the Nexus 5000 switch to continue to boot? (Choose two.)

  A. boot n5000-uk9-kickstart.5.2.1.N1.4.bin
  B. load n5000-uk9.5.2.1.N1.4.bin
  C. copy kickstart-latest n5000-uk9-kickstart.5.2.1.N1.4.bin startup
  D. copy system-latest n5000-uk9.5.2.1.N1.4.bin
  E. boot n5000-uk9.5.2.1.N1.4.bin admin-password Cisco123
  F. load n5000-uk9-kickstart.5.2.1.N1.4.bin
  A. boot n5000-uk9-kickstart.5.2.1.N1.4.bin
  B. load n5000-uk9.5.2.1.N1.4.bin

• Question 302:

  Which two layers of the OSI model are combined in the Internet protocol suite network access layer? (Choose two.)

  A. 1
  B. 2
  C. 3
  D. 4
  E. 5
  F. 6
  G. 7
  A. 1
  B. 2

  ---

  http://en.wikipedia.org/wiki/Internet_protocol_suite

• Question 303:

  An engineer has been tasked with implementing block based storage in the data center. Which protocol must the engineer use?

  A. CIFS
  B. NAS
  C. NFS
  D. FCoE
  D. FCoE

• Question 304:

  Which two statements about a sipne and-leaf data center design are true? (Choose two.)

  A. The design is a three-tier architecture.
  B. The design is a two-tier architecture.
  C. A spine switch corresponds to an access switch in a traditional data center de
  D. All spine switches connect directly to one another.
  E. A leaf switch corresponds to an access switch in a traditional data center design.
  B. The design is a two-tier architecture.
  D. All spine switches connect directly to one another.

• Question 305:

  What are three reasons that switches supersede bridges? (Choose three.)

  A. Smaller frame buffers decrease latency.
  B. Forward, filter, or flood frames.
  C. Multiple simultaneous communications between ports.
  D. Larger inspection engine allows for higher throughput.
  E. Switches have many ports.
  B. Forward, filter, or flood frames.
  C. Multiple simultaneous communications between ports.
  E. Switches have many ports.

  ---

  http://docwiki.cisco.com/wiki/Bridging_and_Switching_Basics

• Question 306:

  Which statement describes the purpose of the MAC address forwarding table of a switch?

  A. The switch consults the forwarding table to determine the best route to a destination.
  B. The switch consults the forwarding table to determine the output port.
  C. The switch consults the forwarding table to determine if the packet is routable.
  D. The switch consults the forwarding table to determine if access control permits the packet.
  B. The switch consults the forwarding table to determine the output port.

• Question 307:

  A network engineer is changing the boot process of a router from its original state to one that boots from ROMMON. Which option in Cisco IOS should be changed?

  A. config register number
  B. RMON
  C. bootflash settings
  D. terminal history
  A. config register number

• Question 308:

  Which two parameters are stored in an FCNS database? (Choose two.)

  A. FCID
  B. VSAN
  C. sWWN
  D. nWWN
  E. pWWN
  A. FCID
  E. pWWN

  ---

  Reference: https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_1_x/1_0_2a/san-os/configuration/guide/MgngStorDevc.html

• Question 309:

  Which description of a vFC interface is true?

  A. It can be associated to an FCoE VLAN.
  B. It can be associated to a private VLAN.
  C. It can be associated to more than one VSAN.
  D. it must be bound to an FCoE enabled Ethernet or EtherChannel interface.
  D. it must be bound to an FCoE enabled Ethernet or EtherChannel interface.

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/521n11/b_5k_FCoE_Config_521N11/b_5k_FCoE_Config_521N11_chapter_0100.html

• Question 310:

  Drag and drop the protocols on the left to the correct storage types for which they are used on the right.

  Select and Place: