Cisco 200-150 Online Practice Questions and Exam Preparation

Cisco 200-150 Online Questions & Answers

• Question 141:

  Which advantage does the bidirectional Cisco QSFP 40-GBPs BiDi transceiver provide?

  A. It supports a breakout connection with a 40-gigabit QSFP port on one end that connections to four 10-gigabit SDFP + ports on the other end.
  B. it supports link lengths up to 40 km over single-mode fiber with duplex line card connectors.
  C. It supports dedicated fabric-extender transceiver modules that connect to fabric links ( that I, links between a fabric extender and a parent switch).
  D. It enables the reuses of the existing 10-gigabit duplex MMF infrastructure for migration to 40 gigabit Ethernet connectivity.
  D. It enables the reuses of the existing 10-gigabit duplex MMF infrastructure for migration to 40 gigabit Ethernet connectivity.

• Question 142:

  Which two options describe what can happen when devices are in the same broadcast domain? (Choose two.)

  A. They are on the same VLAN and the same switch.
  B. They are on different VLANs and the same switch.
  C. They are on different VLANs and different switches.
  D. They are on the same VLAN and different switches.
  A. They are on the same VLAN and the same switch.
  D. They are on the same VLAN and different switches.

• Question 143:

  What is the command sequence to force a Cisco Nexus 6000 switch to boot using the golden BIOS image?

  A. Press Ctrl-Shift-6 within 30 seconds of when power is supplied to the switch.
  B. Press Ctrl-] within 2 seconds of when power is supplied to the switch.
  C. Press Ctrl-] within 30 seconds of when power is supplied to the switch.
  D. Press Ctrl-Shift-6 within 2 seconds of when power is supplied to the switch.
  D. Press Ctrl-Shift-6 within 2 seconds of when power is supplied to the switch.

• Question 144:

  Which two types of interface exist on Cisco Nexus Fabric Extender? (Choose two)

  A. network interface (NIF)
  B. uplink interface (UF)
  C. host interface (HIF)
  D. edge interface (EIF)
  E. trunk interface (TIF)
  A. network interface (NIF)
  C. host interface (HIF)

  ---

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/interf aces/602_n1_1/N5K_Interfaces_Ops_Guide/n5k_ops_gde_fabricextenders.html

• Question 145:

  The kickstart image is corrupted on a Cisco Nexus 7000 switch. Which procedure is used to download a new kickstart image?

  A. Boot the system and press Ctrl-] while the memory test is in progress to interrupt the boot loader.
  B. Boot the system and press the Esc key while the memory test is in progress to interrupt the boot loader.
  C. Boot the system and press the Esc key after the BIOS memory test to interrupt the boot loader.
  D. Boot the system and press Ctrl-] after the BIOS memory test to interrupt the boot loader.
  C. Boot the system and press the Esc key after the BIOS memory test to interrupt the boot loader.

• Question 146:

  Which deployment model is the solution to accommodate fail-over for Cisco Meeting Server?

  A. Single Combined Server Deployment
  B. Single Split Server Deployment
  C. Scaled and Combined Server Deployment D. Scaled and Resilient Server Deployment
  D

• Question 147:

  Which two options describe functions of the data center aggregation layer? (Choose two.)

  A. services layer
  B. high-speed packet switching
  C. repeater
  D. access control
  E. QoS marking
  A. services layer
  D. access control

• Question 148:

  Which two naming formats are used to identify an iSCSI node? (Choose two.)

  A. EUI
  B. MAC
  C. IPv6
  D. IQN
  E. EHA
  A. EUI
  D. IQN

  ---

  https://pubs.vmware.com/vsphere-4-esx- vcenter/index.jsp?topic=/com.vmware.vsphere.config_iscsi.doc_41/esx_san_config/storage _area_network/c_iscsi_naming_conventions.html

• Question 149:

  Refer to the exhibit.

  

  Which statement about the output from SW2 is true?

  A. SW2 discovers SW1 as an LLDP neighbor on port Ethl/1.
  B. SW1 discovers SW2 as an LLDP neighbor on port Eth1/1.
  C. SW2 discovers SW1 as an LLDP neighbor on port Eth1/2
  A. SW2 discovers SW1 as an LLDP neighbor on port Ethl/1.

• Question 150:

  An engineer is configuring a new MDS switch. The switch is powered on, the customer connects to the console, and the initial setup script is started.

  Which two items can be configured during this setup process?

  A. default port-channel mode
  B. default port VSAN membership
  C. default switch port interface state
  D. default zone mode
  E. default storage VDC
  C. default switch port interface state
  D. default zone mode