Cisco 200-150 Online Practice Questions and Exam Preparation

Cisco 200-150 Online Questions & Answers

• Question 161:

  Which two options are benefits of deploying FCoE beyond the access layer?

  A. higher throughput compared to native Fibre Channel switches.
  B. FCoE cannot be deployed beyond the access layer.
  C. reduction in equipment requirements
  D. improved security compared to traditional Fibre Channel.
  E. increased application support.
  A. higher throughput compared to native Fibre Channel switches.
  C. reduction in equipment requirements

• Question 162:

  Which two port types are needed to build out an FCoE pass-through switch in NPV mode while maintaining Fiber Channel packet visibility? (Choose two.)

  A. VN Port
  B. VE Port
  C. VF Port
  D. Edge Port
  E. N Port
  A. VN Port
  C. VF Port

• Question 163:

  What describes how the 802.1Q protocol lactates the transmission of multiple Layer 2 networks on a single link?

  A. adds 802.1Q tag information between the source MAC address and the Ether Type/Length fields
  B. encapsulates the frame inside an 802.1Q tunnel
  C. adds 802.1Q tag information between the preamble and the destination MAC address
  D. encapsulates the packet inside an 802.1Q tunnel
  E. transparently directs packets based on 802.1Q tags inside the header
  A. adds 802.1Q tag information between the source MAC address and the Ether Type/Length fields

  ---

  EEE 802.1Q uses an internal tagging mechanism which inserts a 4-byte tag field in the original Ethernet frame itself between the Source Address and Type/Length fields http://www.cisco.com/c/en/us/support/docs/lan-switching/8021q/17056741-4.html#topic2

• Question 164:

  Instructions:

  THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.

  To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.

  There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.

  Scenario:

  Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.

  Topology:

  

  Exhibit 1.

  

  Exhibit 2.

  

  Exhibit 3.

  

  Exhibit 4.

  

  Which statement is true regarding configuring NPV mode?

  A. When you enable NPV, the system configuration is erased and the switch reboots.
  B. When you enable NPV, the system configuration is not erased and the switch doesn't reboot.
  C. In Exhibit 3 NPV is enabled. but Server Interface to the external switch is not tied to correct vfc 2/1.
  D. In NPV mode, the core switch relays all traffic from server-side ports to the edge switch and core switch provides N ports.
  C. In Exhibit 3 NPV is enabled. but Server Interface to the external switch is not tied to correct vfc 2/1.

• Question 165:

  To which component do you connect the Layer 1 port of a fabric interconnect?

  A. out-of-band management network
  B. Layer 2 port of the same fabric interconnect
  C. Layer 2 port of the opposite fabric interconnect
  D. Layer 1 port of the opposite fabric interconnect
  C. Layer 2 port of the opposite fabric interconnect

• Question 166:

  Which two protocols are associated with the link layer of the TCP/IP reference model? (Choose two.)

  A. UDP
  B. STP
  C. HSRP
  D. Ipsec
  E. LLDP
  B. STP
  E. LLDP

• Question 167:

  Which device would you select to partition a network into VLANs?

  A. repeater
  B. bridge
  C. switch
  D. router
  E. hub
  C. switch

• Question 168:

  What is the binary notation of the 192.168.3.24 IP address?

  A. 10100000 10110010 11100011 00011001
  B. 11000100 11101000 00000011 00010000
  C. 11000000 11000001 11000101 11000111
  D. 11000000 10101000 00000011 00011000
  D. 11000000 10101000 00000011 00011000

• Question 169:

  A network design team has decided to use a standard protocol to consolidate the Ethernet and San data using the existing Nexus switches. Which I/O technology can satisfy this need?

  A. FCoE
  B. IEEE 802. 1AB
  C. SCS
  D. AToM
  A. FCoE

• Question 170:

  Which Cisco Meeting Server component is used for interworking different communication protocols?

  A. XMPP Server
  B. Recorder
  C. Web Bridge
  D. H. 323 gateway
  D. H. 323 gateway