Cisco 200-001 Online Practice Questions and Exam Preparation

Cisco 200-001 Online Questions & Answers

• Question 51:

  Refer to the exhibit.

  

  When the Cisco Jabber Video for TelePresence fails to register with the server, which two fields should be configured at a minimum, assuming SRV records are not configured? (Choose two.)

  A. the internal or external DNS server name for the Cisco TelePresence Video Communications Server
  B. the internal DNS server name for the Cisco TelePresence Management Suite
  C. the SIP domain
  D. the IP address of the Cisco TelePresence Management Suite for the internal server
  E. the IP address of the Cisco Unified Communications Manager for the internal server
  A. the internal or external DNS server name for the Cisco TelePresence Video Communications Server
  C. the SIP domain

• Question 52:

  

  

  

  The Cisco Telepresence Codec C90 is unable to call the Cisco IP Video Phone. Assuming that the calling search space has been configured correctly, which of the these can cause this issue?

  A. The Cisco Telepresence Codec C90 can only be registered to a Cisco Telepresence Video Communication Server.
  B. A multipoint control unit is required in order for the call to work.
  C. The Cisco Telepresence Codec C90 can only be registered as a SIP endpoint to Cisco Unified Communications Manager. H.323 is not supported.
  D. URI dialing has not been configured on Cisco Unified Communications Manager.
  E. The Cisco Telepresence Codec C90 Profile 1 > CallSetupMode must be configured as a gateway since Cisco Unified Communications Manager does not have a gatekeeper functionality.
  F. The Cisco Telepresence Codec C90 is not registered as a SIP endpoint on Cisco Unified Communications Manager. The Cisco Telepresence Codec C90 needs to be registered as both SIP and H.323.
  C. The Cisco Telepresence Codec C90 can only be registered as a SIP endpoint to Cisco Unified Communications Manager. H.323 is not supported.

• Question 53:

  Which of these needs to be enabled in Cisco Unified Communications Manager in order for the Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence System Codec C40 endpoint that is registered to a VCS?

  A. allow iX application media
  B. send send-receive SDP in mid-call invite
  C. allow presentation sharing using BFCP
  D. allow presentation sharing using H.235
  E. deliver conference bridge identifier
  C. allow presentation sharing using BFCP

• Question 54:

  During the initial setup of the Cisco TelePresence System 500, you are required to do an initial camera setup that fails. What might be a primary reason that the failure occurs?

  A. The camera cannot focus on the target.
  B. The room is too dark.
  C. The system is too far away from the target.
  D. The cable to the camera is not connected correctly.
  B. The room is too dark.

• Question 55:

  In an ISR Cisco Video Management and Storage System, what is the maximum storage capacity allowed per module?

  A. 1 TB per module
  B. 2 TB per module
  C. 3 TB per module
  D. 500 MB per module
  E. 750 MB per module
  F. 850 MB per module
  A. 1 TB per module

• Question 56:

  When scheduling a multipoint conference, which three devices are required for the conference to be scheduled and completed successfully? (Choose three.)

  A. Cisco Unified Communications Manager
  B. multipoint control unit
  C. video conferencing endpoints
  D. Cisco Unity Connection
  E. Cisco Unified IM and Presence
  A. Cisco Unified Communications Manager
  B. multipoint control unit
  C. video conferencing endpoints

• Question 57:

  When you register the Cisco TelePresence System 500-32 video system with the Cisco Unified Communications Manager, what is the most important item for the registration to be input into the server?

  A. the IPv4 address of the Cisco TelePresence System 500-32
  B. the IP telephone media access control address that is used to manage the system
  C. the media access control address of the Ethernet port of the Cisco TelePresence System 500-32
  D. The Cisco TelePresence System 500-32 will always automatically register with the Cisco Unified Communications Manager server.
  C. the media access control address of the Ethernet port of the Cisco TelePresence System 500-32

• Question 58:

  Which Cisco TelePresence endpoint uses only Cisco Unified Communications Manager as its call control device?

  A. SX20
  B. Cisco TelePresence System 500-32
  C. EX90
  D. C60
  E. Video Communication Server
  B. Cisco TelePresence System 500-32

• Question 59:

  Refer to the exhibit.

  

  Under which tab can the log file for the endpoint be found?

  A. Diagnostics
  B. Configuration
  C. Call Control
  D. Maintenance
  A. Diagnostics

• Question 60:

  Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video system to a factory condition?

  A. utils factory reset 2
  B. utils system factory init
  C. xcommand defaultvalues set level: 2
  D. xconfiguration default factory
  E. utils reset factory
  F. xcommand SystemUnit FactoryReset
  B. utils system factory init