Cisco 200-001 Online Practice Questions and Exam Preparation

Cisco 200-001 Online Questions & Answers

• Question 31:

  Refer to the exhibits.

  

  The screenshots show outputs from the xStatus of a Cisco TelePresence endpoint and the VCS registrations. What are the protocol and direction of the call, the called party, and the transmit rate of the call?

  A. h.323, incoming, 5919*2345, 1152 Kb/s
  B. h.323, outgoing, 5919*2345, 1152 Kb/s
  C. h.323, incoming, 5919*2345, 768 Kb/s
  D. sip, incoming, 5919*2345, 768 Kb/s
  E. sip, outgoing, 5919*2345, 768 Kb/s
  B. h.323, outgoing, 5919*2345, 1152 Kb/s

• Question 32:

  A user wants to use the One Button to Push feature on a Cisco TelePresence System 500- 32 video endpoint. Which configuration tool should be used to allow the One Button to Push feature to work?

  A. Cisco Unified Communications Manager server, phones, devices, One Button to Push
  B. Cisco Gigaswitch Router, Call Manager Express, One Button to Push
  C. Cisco TelePresence Manager Suite server, new conference, set Conference type to One Button to Push
  D. Active Directory server, users, new conference, One Button to Push
  E. Cisco TelePresence Video Communication Server, new conference, calls, One Button to Push
  C. Cisco TelePresence Manager Suite server, new conference, set Conference type to One Button to Push

• Question 33:

  Refer to Exhibit: Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose two.)

  

  A. The Cisco Unified Communications Manager IM and Presence Service is not available.
  B. The username and password in Cisco Jabber phone services are misconfigured.
  C. The Cisco Jabber initial audio and video settings need to be set.
  D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communications Manager.
  E. The Cisco Jabber does not have the correct phone button template and hence cannot register to the Cisco Unified Communications Manager.
  F. The called user presence status is unknown.
  B. The username and password in Cisco Jabber phone services are misconfigured.
  D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communications Manager.

• Question 34:

  Refer to the exhibit.

  

  Which multipoint feature can be configured using the exhibit that was taken from the Cisco TelePresence Video Communications Server?

  A. Multisite
  B. Multiway
  C. both Multisite and Multiway
  D. Multiway conferences between devices that are registered only to the local Cisco TelePresence Video Communications Server
  E. Multisite conferences between Cisco Video Jabber for TelePresence devices only
  B. Multiway

• Question 35:

  When dialing, in a format that is consistent for all users of a system, a user who has multiple TelePresence video devices associated, what are the three minimum requirements that must be configured for the user to be able to receive video calls? (Choose three.)

  A. The Active Directory server must be installed.
  B. Ensure that the Cisco TelePresence Video Communications Server has the FindMe option key installed.
  C. Ensure that FindMe is set to on.
  D. The NTP server must be set up.
  E. The Cisco TelePresence Management Suite must be installed.
  B. Ensure that the Cisco TelePresence Video Communications Server has the FindMe option key installed.
  C. Ensure that FindMe is set to on.
  E. The Cisco TelePresence Management Suite must be installed.

• Question 36:

  What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints?

  A. Option 150 is not important.
  B. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting.
  C. It is the IPv4 address of the default gateway for the subnet that the video endpoint is connected to.
  D. It is the configured SIP registrar and proxy server.
  E. It is the unique NTP server IPv4 address.
  B. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting.

• Question 37:

  What is the main difference between Cisco Jabber and Cisco Jabber Video for TelePresence?

  A. Cisco Jabber registers to the Cisco Unified Communications Manager, whereas Cisco Jabber Video for TelePresence registers to the VCS.
  B. Cisco Jabber Video for TelePresence registers to Cisco Unified Communications Manager, whereas Cisco Jabber registers to the VCS.
  C. Cisco Jabber has no video calling capabilities, whereas Cisco Jabber Video for TelePresence has video capabilities.
  D. Cisco Jabber has no presence capabilities, whereas Cisco Jabber Video for TelePresence has presence capabilities.
  E. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence. They should not coexist in the same network.
  A. Cisco Jabber registers to the Cisco Unified Communications Manager, whereas Cisco Jabber Video for TelePresence registers to the VCS.

• Question 38:

  Which two additional items can be configured for an endpoint to register with the Cisco TelePresence Video Communication Server for H.323 to function correctly? (Choose two.)

  A. unique system ID
  B. unique H.323 ID
  C. unique DNS entry ID
  D. unique E.164 alias
  E. unique real-time transport protocol port numbers
  F. unique NTP server IPv4 address
  B. unique H.323 ID
  D. unique E.164 alias

• Question 39:

  What is the optimum distance for a person sitting using the Cisco TelePresence System 500?

  A. the camera can adjust automatically
  B. 0.5 meters and 0.75 meters (1.5 and 2.5 feet)
  C. 1.2 meters and 1.8 meters (4 and 6 feet)
  D. 3.0 and 5.0 meters (10 and 15 feet)
  C. 1.2 meters and 1.8 meters (4 and 6 feet)

• Question 40:

  Which two issues does utilizing an IP network storage solution for IP video surveillance help overcome? (Choose two.)

  A. analog to IP conversion
  B. large, expandable storage space
  C. physical security
  D. scalability
  E. faster bit rate for storage
  B. large, expandable storage space
  D. scalability