Cisco 200-001 Online Practice Questions and Exam Preparation

Cisco 200-001 Online Questions & Answers

• Question 1:

  

  

  The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue?

  A. The subnet mask on the codec is incorrect.
  B. The ip address of the codec is incorrect.
  C. The interface that the codec is in is in the wrong VLAN.
  D. The codec did not receive a DHCP address from the DHCP server.
  A. The subnet mask on the codec is incorrect.

• Question 2:

  Which two systems would be an appropriate solution for a traveling employee? (Choose two.)

  A. Cisco Jabber
  B. Cisco C-Series codec
  C. Cisco TelePresence EX Series
  D. Cisco Jabber Video for TelePresence
  E. Cisco TelePresence System 500
  F. Cisco IP Video Phone E20
  A. Cisco Jabber
  D. Cisco Jabber Video for TelePresence

• Question 3:

  Which two Cisco TelePresence systems would be appropriate for an executive personal office? (Choose two.)

  A. Cisco Jabber
  B. Cisco IP Video Phone E20
  C. Cisco TelePresence EX Series
  D. Cisco Jabber Video for TelePresence
  E. Cisco TelePresence System 500
  C. Cisco TelePresence EX Series
  E. Cisco TelePresence System 500

• Question 4:

  Which two layout or switching modes are supported with the Cisco TelePresence Multipoint Switch? (Choose two.)

  A. enhanced continuous presence
  B. active speaker switching
  C. continuous presence D. speaker switching
  E. room switching
  F. active continuous presence
  E. room switching

• Question 5:

  Which two of these support an ad-hoc conference call? (Choose two.)

  A. Cisco TelePresence Multiway with Cisco TelePresence Multipoint Control Unit and Cisco TelePresence Video Communications Server
  B. using the Cisco TelePresence Management Suite Scheduler to schedule a conference call to start in 5 minutes
  C. using the Booking tab in the Cisco TelePresence Management Suite to configure a new conference
  D. using the tab Administrative Tools > Configuration > Conference Settings in the Cisco TelePresence Management Suite
  E. pressing the conference button on a Cisco Unified IP Phone 8941 to conference in a third call
  A. Cisco TelePresence Multiway with Cisco TelePresence Multipoint Control Unit and Cisco TelePresence Video Communications Server
  E. pressing the conference button on a Cisco Unified IP Phone 8941 to conference in a third call

• Question 6:

  Cisco Video Surveillance Video Encoder cards perform which function?

  A. the ability to use existing analog equipment with an IP-enabled video surveillance system
  B. the ability to convert low-resolution video to high-definition video for video surveillance
  C. the ability to stream digital media to digital media in an IP-enabled video recording environment
  D. the ability to encrypt raw video signals to secure video signals
  A. the ability to use existing analog equipment with an IP-enabled video surveillance system

• Question 7:

  Which Cisco TelePresence multipoint platform utilizes only Cisco Unified Communications Manager for call control?

  A. Cisco TelePresence Multipoint Control Unit
  B. Cisco TelePresence Multipoint Switch
  C. Cisco TelePresence Server
  D. Cisco TelePresence Media Bridge Server
  E. Cisco TelePresence System 500-32
  F. Cisco TelePresence SX20
  B. Cisco TelePresence Multipoint Switch

• Question 8:

  Which configuration is needed in order for Cisco Jabber Video for TelePresence to initiate Multiway calls?

  A. Configure the Multiway address under Video Settings in the Cisco Jabber Video for TelePresence client.
  B. Configure the Mutliway URI address under TelePresence Management Suite > Systems > Provisioning > Users > Configuration Template.
  C. Configure the Mutliway URI address under Cisco TelePresence Video Communications Server > Applications > Cisco Jabber Video for TelePresence.
  D. The Cisco Jabber Video for TelePresence only supports Multisite calls, which is enabled by default.
  B. Configure the Mutliway URI address under TelePresence Management Suite > Systems > Provisioning > Users > Configuration Template.

• Question 9:

  You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of 172.28.254.45. You need to check for connectivity from the Cisco Unified Communications Manager server. Which command should be entered to check for network connectivity?

  A. utils network traceroute newsystem.domain254.local
  B. utils network ping 172.28.254.45
  C. ping 172.28.254.45
  D. traceroute 172.28.255.255
  E. utils network host cucm.osl147.local
  B. utils network ping 172.28.254.45

• Question 10:

  What is the correct order of steps to schedule a One Button to Push conference call between a Cisco TelePresence System 500 and a Cisco TelePresence Codec C40?

  A. Configure the One Button to Push field under device configuration for the Cisco TelePresence System 500 and Codec C40.
  B. Configure One Button to Push under Cisco TelePresence Video Communications Server > Applications > OBTP Configuration.
  C. Configure a new conference under Cisco TelePresence Management Suite > Booking New Conference > Type.
  D. The One Button to Push feature cannot be configured without a scheduling plug-in application such as Microsoft Outlook.
  E. Configure the Scheduler tool in the Cisco TelePresence Management Suite.
  C. Configure a new conference under Cisco TelePresence Management Suite > Booking New Conference > Type.