Cisco 200-001 Online Practice Questions and Exam Preparation

Cisco 200-001 Online Questions & Answers

• Question 21:

  You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of 172.28.254.45. Which three devices could you use to see if the endpoint is registered and available for a call? (Choose three.)

  A. Cisco Unified Communications Manager server
  B. Cisco Gigaswitch Router
  C. Cisco TelePresence Manager Suite server
  D. Active Directory server
  E. Cisco TelePresence Video Communication Server
  F. Cisco 3250 Layer 2/3 Switch
  A. Cisco Unified Communications Manager server
  C. Cisco TelePresence Manager Suite server
  E. Cisco TelePresence Video Communication Server

• Question 22:

  You have installed a C-Series endpoint in an office where DHCP is not supported. At a minimum, which four network items must be configured for the endpoint to be able to register with H.323 on a Cisco TelePresence Video Communication Server located at the external headquarters location? (Choose four.)

  A. unique IPv4 address
  B. subnet mask
  C. default gateway
  D. Cisco VCS IPv4 address
  E. Active Directory IPv4 address
  F. SMTP server IPv4 address
  A. unique IPv4 address
  B. subnet mask
  C. default gateway
  D. Cisco VCS IPv4 address

• Question 23:

  What are the best practices for maintaining a high-quality video call regarding latency, jitter,and packet loss?

  A. 20-ms one-way delay, no jitter, no packet loss
  B. less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet loss
  C. 150- to 400-ms one-way delay, 50-ms jitter, 5 percent packet loss
  D. 500-ms one-way delay, 50-ms jitter, 5 percent packet loss
  B. less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet loss

• Question 24:

  What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch?

  A. The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge.
  B. The Cisco TelePresence Multipoint Control Unit is a software bridge for immersive and non-immersive endpoints. The Cisco TelePresence Multipoint Switch is a hardware bridge for non-immersive endpoints.
  C. The Cisco TelePresence Multipoint Control Unit delivers automatic voice-activated switching. The Cisco TelePresence Multipoint Switch provides active presence.
  D. The Cisco TelePresence Multipoint Control Unit has a latency of less than 10 ms, whereas the Cisco TelePresence Multipoint Switch has a latency of 100 ms.
  A. The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge.

• Question 25:

  

  

  

  

  

  

  When the Cisco Jabber usertries to call extension 3501, Cisco Jabber never places the call No errors or messages are seen and no reordertone is heard. Assuming that the Cisco Jabber calling search space is configured correctly in Cisco Unified Communications Manager, which of these could be causing this issue?

  A. CTI for the end user must be enabled.
  B. Cisco Jabber must be reconfigured for desktop mode.
  C. The username or password is misconfigured in Cisco Jabber.
  D. The Cisco Jabber Advanced Phone Settings are misconfigured.
  E. Cisco Jabber does not have the correct phone button template and hence has not registered to the Cisco Unified Communications Manager.
  F. The called user presence status is unknown.
  G. The called user has not been added as a contact in Cisco Jabber.
  D. The Cisco Jabber Advanced Phone Settings are misconfigured.

• Question 26:

  While performing a password recovery on a Cisco TelePresence endpoint, what is the maximum amount of time for input to be received by the device before the system exits the password recovery mode?

  A. 15 seconds
  B. 20 seconds
  C. 30 seconds
  D. 40 seconds
  E. 60 seconds
  E. 60 seconds

• Question 27:

  

  

  Refer to the Exhibits, in order to create a scheduled or ad-hoc multipoint conference, which two tolls can be used? (Choose two)

  A. Exhibit A
  B. Exhibit B
  C. Exhibit C
  D. Exhibit D
  E. Exhibit E
  B. Exhibit B
  D. Exhibit D

• Question 28:

  Which well-known port is used to access the Cisco IP Video Surveillance Operations Manager via a secure, ActiveX web session?

  A. 20
  B. 80
  C. 421
  D. 434
  E. 443
  F. 8080
  E. 443

• Question 29:

  Which scheduling and management application can be installed on any hardware platform that meets the minimum specifications that the end customer decides to deploy?

  A. Cisco Video Communications
  B. Cisco TelePresence Management Suite
  C. Cisco Digital Media Manager
  D. Cisco TelePresence Management Switch
  E. Cisco Unified Communications Manager
  B. Cisco TelePresence Management Suite

• Question 30:

  Refer to the exhibit.

  

  Which configuration element can be used to specify the Multiway address that can be used by the endpoint to initiate Multiway calls?

  A. Conference 1
  B. NetworkServices
  C. Provisioning
  D. SIP Profile 1
  E. Video
  B. NetworkServices