Riverbed 199-01 Online Practice Questions and Exam Preparation

Riverbed 199-01 Online Questions & Answers

• Question 381:

  By default, which Steelhead appliances are placed in an Interceptor appliance's auto pool?

  A. All Steelhead appliances in the network
  B. Peer-neighbor Steelhead appliances as targets in one Load Balancing rule
  C. Peer-neighbor Steelhead appliances not assigned as targets in any Load Balancing rule
  D. Peer-neighbor Steelhead appliances assigned to all current Load Balancing rules
  C. Peer-neighbor Steelhead appliances not assigned as targets in any Load Balancing rule

• Question 382:

  The fair peering feature on Interceptor appliances can be enabled:

  A. For each load-balancing rule, including the default rule.
  B. For each load-balancing rule, excluding the default rule.
  C. Only for the default rule.
  D. For each load-balancing rule and in-path rule
  E. For each load-balancing rule, in-path rule, including the default rule.
  A. For each load-balancing rule, including the default rule.

• Question 383:

  What is the default Connection Forwarding keep alive interval?

  A. 1 second
  B. 3 seconds
  C. 5 seconds
  D. 10 seconds
  E. 15 seconds
  A. 1 second

• Question 384:

  What is the baud-rate of the console port on the CMC appliance?

  A. 1200
  B. 2400
  C. 4800
  D. 9600
  E. 19200
  D. 9600

• Question 385:

  You would like your Steelhead Mobile clients to automatically detect when they are in a branch office with a local Steelhead. You have decided that the Steelhead Mobile Client should only optimize connections if the Steelhead appliance is more than 10 ms away. What is the name of the feature you need to enable?

  A. Adapter location awareness
  B. Latency licensing awareness
  C. Optimization awareness
  D. Branch office self-awareness
  E. Latency-based location awareness
  E. Latency-based location awareness

• Question 386:

  You have a client and server using SMB2 signing. You have SMB optimization enabled on your SteelHeads, but SMB signing is not enabled on the server-side SteelHead. What is the effect on this on an SMB connection which the SteelHeads attempt to optimize?

  A. Any SMB2 connections between this client and server will be shown as optimized with protocol errors. No latency optimization or data reduction can be performed.
  B. SMB2 connections between this client and server, which are initiated at the client side will be fully optimized with latency reduction.
  C. Any SMB2 connections between this client and server will be optimized using data reduction only. No latency optimization will take place.
  D. Any SMB2 connections between this client and server will be optimized using latency optimization only No data reduction will take place.
  C. Any SMB2 connections between this client and server will be optimized using data reduction only. No latency optimization will take place.

• Question 387:

  To verify that the Steelhead Mobile client software is running, what process should you look for in the Windows Task Manager?

  A. rbtsport.exe
  B. taskmgr.exe
  C. svchost.exe
  D. services.exe
  E. rivmobile.exe
  A. rbtsport.exe

• Question 388:

  What are the default port labels on an Interceptor appliance?

  A. Optimized, Pass-through, Blocked
  B. Interactive, RBT-Proto, Secure
  C. RBT-Proto, Enabled, Disabled
  D. Named differently from those on the Steelhead appliance
  E. Port labels do not exist on an Interceptor appliance
  B. Interactive, RBT-Proto, Secure

• Question 389:

  What is contained in the probe of the return SYN/ACK packet when using enhanced auto-discovery (EAD)?

  A. 4 bytes of notification
  B. 10 bytes of TCP inner channel setup + 2 bytes of notification
  C. 14 bytes of TCP inner channel setup + 4 bytes of notification
  D. 18 bytes of TCP inner channel setup + 4 bytes of notification
  E. 32 bytes of TCP inner channel setup + 2 bytes of notification
  C. 14 bytes of TCP inner channel setup + 4 bytes of notification

• Question 390:

  On the Interceptor appliance, connection tracing feature enables you:

  A. To determine to which Interceptor appliances the Virtual Steelhead appliance has redirected specific connections.
  B. To determine to which Interceptor appliances the Steelhead appliance has redirected specific connections.
  C. To determine to which Steelhead appliances the Interceptor appliance has redirected specific connections.
  D. To determine to which Mobile Controller the Interceptor appliance has redirected specific connections.
  C. To determine to which Steelhead appliances the Interceptor appliance has redirected specific connections.