Riverbed 199-01 Online Practice Questions and Exam Preparation

Riverbed 199-01 Online Questions & Answers

• Question 351:

  What Steelhead appliance models support the installation of Microsoft Windows Server 2008 R2 package on the RSP? (Select 2)

  A. 1050
  B. 250
  C. 550
  D. 3020
  A. 1050
  D. 3020

• Question 352:

  When deploying failover Interceptors, all in-path interfaces must:

  A. be deployed on different physical links.
  B. be deployed on 802.1Q trunks.
  C. be deployed on all the same physical links.
  D. be deployed separately.
  C. be deployed on all the same physical links.

• Question 353:

  In a new in-path deployment, connections are listed as pass-through on the branch office Steelhead appliance. Which of the following is the likely cause of the problem? 1) Pass-through rule preventing optimization 2) Server-side Steelhead appliance is down 3) Satellite proxy not copying auto-discovery probes 4) Asymmetric routing is detected for the client/server flow 5) Duplex mismatch on WAN or LAN interface

  A. 3, 2
  B. 2, 4
  C. 1, 2, 5
  D. 1, 2, 3, 4
  E. 1, 2, 3, 4, 5
  D. 1, 2, 3, 4

• Question 354:

  A SteelHead in an Interceptor cluster notifies the Interceptor that it is under high pressure. How many credits are reduced for that SteelHead?

  A. 0%
  B. 10%
  C. 20%
  D. 30%
  E. 50%
  B. 10%

• Question 355:

  After completing the SRDF configuration on both Steelhead appliances and restarting the optimization service, the SRDF connections in the Current Connections report show a red protocol error icon in the Notes column. What could be a cause of this issue?

  A. A SRDF protocol error can occur when attempting to optimize traffic originating from the LAN-side of the Steelhead appliance. Please check the LAN-side Symmetrix array for compatibility.
  B. The red icon indicates that RiOS is optimizing the connection normally.
  C. A SRDF protocol error can occur when attempting to optimize traffic originating from the WAN-side of the Steelhead appliance. Please check the WAN-side Symmetrix array for compatibility.
  D. Symmetrix needs to be enabled on the EMC server.
  A. A SRDF protocol error can occur when attempting to optimize traffic originating from the LAN-side of the Steelhead appliance. Please check the LAN-side Symmetrix array for compatibility.

• Question 356:

  You have outgrown your current Steelhead appliance and want to copy the datastore from your exiting Steelhead 550 appliance to a new 2050 Steelhead appliance. What feature would you use to synchronize the different model Steelhead appliance datastores?

  A. Export/Import operation function
  B. Copy the datastore file system
  C. "datastore send" command
  D. Copying the configuration files
  E. This cannot be done on Steelhead appliances
  E. This cannot be done on Steelhead appliances

• Question 357:

  Simplified routing learns to associate MAC addresses to IP addresses by: (Select 2) A. Tracking destination IP addresses and matching them to the correct MAC address

  B. Tracking source IP addresses and matching them to the correct MAC address
  C. Tracking ARP requests sent by surrounding routers
  D. Tracking ARP requests sent by surrounding switches
  B. Tracking source IP addresses and matching them to the correct MAC address

• Question 358:

  Which of the following interfaces should be used for datastore synchronization? (Select 2)

  A. inpath0_0
  B. inpath0_1
  C. Primary
  D. AUX
  C. Primary
  D. AUX

• Question 359:

  You choose to deploy a Steelhead appliance logically in-path using policy-based routing (PBR) as the traffic redirection method. Additionally, you want to mark the Type of Service (ToS) value for active FTP as AF21 using route-maps. Which route-map specified Type of Service (ToS) value is correct? (Hint: Use the calculator)

  A. EF21
  B. 0x48
  C. 0x58
  D. 0xb8
  E. 18
  B. 0x48

• Question 360:

  Which of the following is true about fetching Steelhead appliance's configurations from a CMC appliance?

  A. Fetched configurations are automatically saved as groups, which can be managed and applied to appliances and appliance policies
  B. Configurations cannot be fetched from the CMC appliance, they must be pushed
  C. Fetched configurations are automatically saved as policies, which can be managed and applied to appliances and appliance groups
  D. Fetched configurations are saved as system settings, which can be managed and applied to appliances and appliance groups
  C. Fetched configurations are automatically saved as policies, which can be managed and applied to appliances and appliance groups