Cisco 100-105 Online Practice Questions and Exam Preparation

Cisco 100-105 Online Questions & Answers

• Question 281:

  What does not belong to Syslog?

  A. host name
  B. severity
  C. timestamp
  D. message
  A. host name

• Question 282:

  What is the lowest AD?

  A. OSPF
  B. EIGRP
  C. IS-IS
  D. IBGP
  E. RIPv2
  B. EIGRP

• Question 283:

  Which type of IPv6 address does the SLAAC process create?

  A. link-local address
  B. multicast address
  C. anycast address
  D. global address
  D. global address

• Question 284:

  Refer to the exhibit. Which default gateway address should be assigned to HostA?

  

  A. 192.168.1.1
  B. 192.168.1.65
  C. 192.168.1.66
  D. 192.168.1.129
  E. 10.1.1.1
  F. 10.1.1.2
  B. 192.168.1.65

• Question 285:

  Refer to the exhibit.

  

  If CDP is enabled on all devices and interfaces, which devices will appear in the output of a show cdp neighbors command issued from R2?

  A. R1, S1, S2, R3 and S3
  B. R2 and R3
  C. R3 and S2
  D. R1 and R3
  E. R1, S1, S2, and R3
  C. R3 and S2

• Question 286:

  Why does a host use a DNS server?

  A. To make a DNS client request to server
  B. To resolve IP to FQDN
  C. To resolve FQDN to IP
  D. To assign IP
  C. To resolve FQDN to IP

• Question 287:

  Which two options are fields in an ethernet frame ? (Choose two)

  A. destination ip address
  B. source ip address
  C. type
  D. frame check sequence
  E. header
  C. type
  D. frame check sequence

• Question 288:

  Refer to the exhibit. A host is connected to switch port fa0/3. The host and switch have been fully configured for IP connectivity as shown. However, the indicator LED on switch port fa0/3 is not on, and the host cannot communicate with any other hosts including those connected to VLAN 2 on the same switch. Based on the given information, what is the problem?

  

  A. switch port fa0/3 is not configured as a trunk port
  B. there is a bad cable
  C. the switch has been assigned an incorrect subnet mask
  D. switch port fa0/3 has been blocked by STP
  E. the switch and the host must be in the same subnet
  B. there is a bad cable

• Question 289:

  Which effect of the passive-interface command on R1 is true?

  R1 Interface FastEthernet0/0 description site id: XXXXXXXX ip address 172.16.0.1 255.255.0.0

  Interface FastEthernet0/1 description site id: XXXXXXXX ip address 172.17.0.1 255.255.0.0

  router rip passive-interface FastEthernet0/0 network 172.16.0.0 network 172.17.0.0 version 2

  A. It prevents interface Fa0/0 from sending updates.
  B. Interface Fa 0/0 operates in RIPv1 mode.
  C. It removes the 172.16.0.0 network from all updates on all interfaces on R1.
  D. It removes the 172.16.0.0 network from all updates on all interfaces on R1.
  A. It prevents interface Fa0/0 from sending updates.

• Question 290:

  DRAG DROP

  Drag and drop the show cdp commands from the top onto the output they generate below.

  Select and Place: