UiPath UIPATH-ADAV1 Online Practice Questions and Exam Preparation

UiPath UIPATH-ADAV1 Online Questions & Answers

• Question 1:

  During a code review, a developer discovered that the variable names did not follow best practices in an automation project. What happens when the developer updates the names of the variables in the Variables panel?

  A. Only String variable names are automatically updated in the activities in the current file
  B. Variable names are updated in the panel but must be manually updated in all Ul Automation activities that use them
  C. All variable names are automatically updated in the activities in the current file
  D. Variable names are updated in the panel but must be manually updated in all Image activities that use them
  C. All variable names are automatically updated in the activities in the current file

  ---

  Explanation

  The Variables panel is a panel in UiPath Studio that allows you to create and manage variables in a workflow file. You can change the name, type, scope, and default value of a variable in the Variables panel. When you update the name of a variable in the Variables panel, all the activities that use that variable in the current file are automatically updated with the new name. This ensures that the variable references are consistent and valid throughout the workflow. However, if the variable is used in other workflow files, such as invoked workflows or libraries, you need to manually update the name in those files as well. Therefore, the answer is

  C. All variable names are automatically updated in the activities in the current file.

  References: Managing Variables, Variables

• Question 2:

  Which two parts are included in an Anchor Base activity?

  A. Anchor and Action
  B. Anchor and Condition
  C. Anchor and Trigger Scope
  D. Anchor and Sequence
  A. Anchor and Action

  ---

  Explanation

  The two parts that are included in an Anchor Base activity are Anchor and Action. The Anchor Base activity is a container that searches for a UI element by using other UI elements as anchors. This should be used when a reliable selector is

  not available. The Anchor Base activity has two sections: Anchor and Action. The Anchor section contains an activity that identifies the anchor element, such as Find Element or Find Image. The Action section contains an activity that

  performs an action on the target element, such as Click or Type Into. The Anchor Base activity also has a property called AnchorPosition, which specifies the relative position of the target element to the anchor element, such as left, right, top,

  or bottom2. For example, if the Anchor Base activity is used to click on a button that is always to the right of a label, the Anchor section can use the Find Element activity to find the label, the Action section can use the Click activity to click on

  the button, and the AnchorPosition property can be set to Right3.

  References: Anchor Base and How to properly use AnchorBase activity? from UiPath documentation and forum.

• Question 3:

  What variable type should the developer use to store the monetary amount read from a single cell in an Excel file, before inputting it into a field in a web application for the automation process?

  A. List
  B. Double
  C. DataRow
  D. Object
  B. Double

  ---

  Explanation

  The variable type that the developer should use to store the monetary amount read from a single cell in an Excel file, before inputting it into a field in a web application for the automation process, is Double. This is because the Double variable type can store decimal numbers with high precision and a large range of values. This is suitable for storing monetary amounts that may have fractions or large digits. The Double variable type can be used with the Read Cell activity to read the value from the Excel file, and with the Type Into activity to input the value into the web application. The developer can also use the Format Value activity to format the Double variable as a currency, if needed.

  References: Types of Variables - UiPath Studio Read Cell - UiPath Activities Type Into - UiPath Activities Format Value - UiPath Activities

• Question 4:

  In a UiPath State Machine workflow, which section of State activity is used to specify conditional/triggers logic and multiple outgoing transitions in a state machine?

  A. Triggers
  B. Entry
  C. Exit
  D. Transitions
  A. Triggers

  ---

  Explanation

  The Triggers section of the State activity is used to specify the conditional or trigger logic and multiple outgoing transitions in a state machine. A trigger is a condition that evaluates to true or false and determines whether the state machine should move from one state to another. A transition is a link between two states that defines the direction of the state machine flow. You can add multiple triggers and transitions to a state and configure their properties, such as priority, display name, and action. (UiPath Studio documentation1)

  References:

  1: State - UiPath Activities.

• Question 5:

  Upon extracting data from a website, a developer saves it in three variables: "FirstName", "LastName", and "City". The developer intends to store these three String variables in a fixed-size data structure called "UserData", to be utilized later within another workflow in the process.

  Considering best practices, which data structure and assignment should be used?

  A. UserData is of type List UserData = New List(Of Object) ({ FirstName, LastName, City })
  B. UserData is of type Object[] UserData = {FirstName, LastName, City}
  C. UserData is of type List UserData = New List(Of String) ({ FirstName, LastName, City })
  D. UserData is of type String[] UserData = {FirstName, LastName, City}
  D. UserData is of type String[] UserData = {FirstName, LastName, City}

  ---

  Explanation

  This is the best option because it meets the requirements of storing three String variables in a fixed-size data structure. A String[] is an array of String values, which can be initialized with a fixed size and assigned with a set of values using curly braces. An array is a simple and efficient data structure that can store multiple values of the same type and access them by index. A List is another data structure that can store multiple values, but it is not fixed-size and it requires creating a new instance using the New keyword. An Object is a generic type that can store any kind of value, but it is not recommended to use it for specific types like String, as it may cause type conversion errors or performance issues. Therefore, option D is the best choice for storing the three String variables in a fixed-size data structure called UserData.

  References: Variables, Arguments, and Control Flow in Studio, Data Types in UiPath, Arrays in UiPath

• Question 6:

  To read only the first page of a .pdf file using the Read PDF Text activity, what value should be entered into the Range property?

  A. "1"
  B. ""
  C. 1
  D. (0)
  A. "1"

  ---

  Explanation

  To read only the first page of a PDF file using the "Read PDF Text" activity in UiPath, the value that should be entered into the "Range" property is "1". This specifies that only the first page of the PDF should be read by the activity. Options B,

  C, and D do not represent the correct syntax for specifying a single-page range in the activity property.

  References:

  UiPath Activities Guide: Read PDF Text

• Question 7:

  In the context of the REFramework, if the OrchestratorQueueName key is present in both the Settings and Assets sheets, but an asset with the corresponding name is not present in Orchestrator, what will be the behavior at run time?

  A. The flow will throw an exception in InitAllSettings workflow.
  B. The flow will use the value from the Settings sheets since the asset is missing.
  C. An empty string will be saved for the "OrchestratorQueueName" key in the config dictionary.
  D. The "OrchestratorQueueName" key is not added to the config dictionary and the flow will throw in Get Transaction Data workflow.
  B. The flow will use the value from the Settings sheets since the asset is missing.

  ---

  Explanation

  The REFramework template is a robust and scalable framework for building RPA projects1. It uses a config file to store the settings and constants that are used throughout the project2. The config file has two sheets: Settings and Assets. The Settings sheet contains the key-value pairs that are read by the InitAllSettings workflow and stored in the config dictionary. The Assets sheet contains the names of the assets that are stored in Orchestrator and need to be retrieved by the InitAllApplications workflow. The OrchestratorQueueName key is used to specify the name of the queue that is used to store the transaction items for the process. If the OrchestratorQueueName key is present in both the Settings and Assets sheets, but an asset with the corresponding name is not present in Orchestrator, the behavior at run time will be as follows: The InitAllSettings workflow will read the value of the OrchestratorQueueName key from the Settings sheet and store it in the config dictionary. The InitAllApplications workflow will try to retrieve the asset with the name OrchestratorQueueName from Orchestrator using the Get Asset activity. Since the asset does not exist, the activity will throw an exception. The exception will be caught by a Try Catch block and handled by a Log Message activity with level Warning and message "Asset not found: OrchestratorQueueName". The flow will continue with the next asset in the Assets sheet or move to the next state if there are no more assets. The flow will use the value of the OrchestratorQueueName key from the config dictionary whenever it needs to access or update the queue. Therefore, option B is correct. Option A is incorrect because the exception is thrown in InitAllApplications workflow, not InitAllSettings workflow. Option C is incorrect because an empty string is not saved for the OrchestratorQueueName key in the config dictionary. Option D is incorrect because the OrchestratorQueueName key is added to the config dictionary and the flow does not throw in Get Transaction Data workflow.

  References: How to Use Enhanced REFramework to Implement UiPath Projects article from UiPath Config.xlsx documentation from UiPath [InitAllSettings.xaml] documentation from UiPath [InitAllApplications.xaml] documentation from UiPath [TransactionItem Variable] documentation from UiPath

• Question 8:

  A developer intends to enter text into an input field using a combination of a string and a hotkey. The input action should take place within a hidden or minimized window.

  Which input method(s) can be used individually for the Type Into activity?

  A. Simulate only.
  B. Simulate and Window Messages.
  C. Same as App/Browser and Simulate.
  D. Window Messages only.
  B. Simulate and Window Messages.

  ---

  Explanation

  The Type Into activity is used to enter text in a specified UI element, such as a text box. It has three input methods that can be selected from the properties panel: Default, Simulate, and Window Messages1. Each input method has different advantages and limitations, depending on the target application and the automation scenario2. The Default input method uses the hardware driver to simulate the keystrokes, as if a human user is typing on the keyboard. It is the most reliable and compatible input method, but it requires the target application to be in focus and visible on the screen. It also supports sending special keys, such as Tab or Enter, using brackets [k(enter)] or [k(tab)]. The Simulate input method uses the technology of the target application to directly inject the text into the UI element. It does not rely on the hardware driver, so it can work in the background, even if the target application is hidden or minimized. It also supports sending special keys using brackets [k(enter)] or [k(tab)]. However, it may not be compatible with some applications or UI elements that do not support this method. The Window Messages input method uses the Windows API to send messages directly to the target application. It can also work in the background, even if the target application is hidden or minimized. It does not support sending special keys using brackets [k(enter)] or [k(tab)], but it can send them using modifiers such as {ENTER} or {TAB}. However, it may not be compatible with some applications or UI elements that do not accept window messages. Therefore, if a developer intends to enter text into an input field using a combination of a string and a hotkey, and the input action should take place within a hidden or minimized window, they can use either the Simulate or the Window Messages input method individually for the Type Into activity. They cannot use the Default input method, because it requires the target application to be in focus and visible on the screen. They also cannot use the Same as App/Browser input method, because it is not an option for the Type Into activity.

  References: Type Into - UiPath Documentation Portal. What are different Input methods in UiPath - UiPath Community Forum.

• Question 9:

  What do the percentages from the Test Explorer panel represent?

  

  A. Correctness of the code percent.
  B. Passing percent.
  C. Coverage percent.
  D. Percent of test data run.
  C. Coverage percent.

  ---

  Explanation

  The percentages from the Test Explorer panel represent the coverage of the test cases, which is the ratio of the number of activities that are executed by the test cases to the total number of activities in the project. The higher the coverage,

  the more thorough the testing is. The coverage percentage is calculated for each test case, test set, and the entire project. You can view the coverage details in the Coverage sub-panel of the Test Explorer1.

  References:

  Test Explorer documentation from UiPath

• Question 10:

  Which activity can be used to transition a Background Process to Foreground?

  A. Use Foreground
  B. Activate
  C. Maximize Window
  D. Set Focus
  A. Use Foreground

  ---

  Explanation

  The Use Foreground activity can be used to transition a Background Process to Foreground. It allows you to perform UI automation tasks that require user interaction or visibility1. The other activities are not suitable for this purpose.

  References:

  Background Process Automation documentation, Transitioning a Background Process to Foreground section