1. Home
  2. Fortinet
  3. NSE7_EFW-6.2

Fortinet NSE7_EFW-6.2 Online Practice Questions and Exam Preparation

NSE7_EFW-6.2 Exam Details

  • Exam Code
    :NSE7_EFW-6.2
  • Exam Name
    :Fortinet NSE 7 - Enterprise Firewall 6.2
  • Certification
    :Fortinet Certifications
  • Vendor
    :Fortinet
  • Total Questions
    :102 Q&As
  • Last Updated
    :May 26, 2026

Fortinet NSE7_EFW-6.2 Online Questions & Answers

  • Question 71:

    Refer to the exhibit, which contains the output of diagnose sys session list.

    If the HA ID for the primary unit is zero (0), which statement about the output is true?

    A. This session cannot be synced with the slave unit.
    B. The inspection of this session has been offloaded to the slave unit.
    C. The master unit is processing this traffic.
    D. This session is for HA heartbeat traffic.

  • Question 72:

    An administrator is running the following sniffer in a FortiGate: diagnose sniffer packet any "host 10.0.2.10" 2

    What information is included in the output of the sniffer? (Choose two.)

    A. Ethernet headers.
    B. IP payload.
    C. IP headers.
    D. Port names.

  • Question 73:

    Examine the output of the `diagnose ips anomaly list' command shown in the exhibit; then answer the question below.

    Which IP addresses are included in the output of this command?

    A. Those whose traffic matches a DoS policy.
    B. Those whose traffic matches an IPS sensor.
    C. Those whose traffic exceeded a threshold of a matching DoS policy.
    D. Those whose traffic was detected as an anomaly by an IPS sensor.

  • Question 74:

    An administrator has configured the following CLI script on FortiManager, which failed to apply any changes to the managed device after being executed.

    Why didn't the script make any changes to the managed device?

    A. Commands that start with the # sign are not executed.
    B. CLI scripts will add objects only if they are referenced by policies.
    C. Incomplete commands are ignored in CLI scripts.
    D. Static routes can only be added using TCL scripts.

  • Question 75:

    An administrator has enabled HA session synchronization in a HA cluster with two members. Which flag is added to a primary unit's session to indicate that it has been synchronized to the secondary unit?

    A. redir.
    B. dirty.
    C. synced
    D. nds.

  • Question 76:

    Examine the following partial outputs from two routing debug commands; then answer the question below.

    # get router info kernel

    tab=254 vf=0 scope=0type=1 proto=11 prio=0 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.1.254 dev=2(port1)

    tab=254 vf=0 scope=0type=1 proto=11 prio=10 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.2.254 dev=3(port2)

    tab=254 vf=0 scope=253type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/.->10.0.1.0/24 pref=10.0.1.254 gwy=0.0.0.0 dev=4(port3)

    # get router info routing-table all s*0.0.0.0/0 [10/0] via 10.200.1.254, portl [10/0] via 10.200.2.254, port2, [10/0] dO.0.1.0/24 is directly connected, port3 dO.200.1.0/24 is directly connected, portl d0.200.2.0/24 is directly connected, port2

    Which outbound interface or interfaces will be used by this FortiGate to route web traffic from internal users to the Internet?

    A. port!
    B. port2.
    C. Both portl and port2.
    D. port3.

  • Question 77:

    View the exhibit, which contains the output of a debug command, and then answer the question below.

    What statement is correct about this FortiGate?

    A. It is currently in system conserve mode because of high CPU usage.
    B. It is currently in FD conserve mode.
    C. It is currently in kernel conserve mode because of high memory usage.
    D. It is currently in system conserve mode because of high memory usage.

  • Question 78:

    Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)

    A. Preview pending configuration changes for managed devices.
    B. Add devices to FortiManager.
    C. Import policy packages from managed devices.
    D. Install configuration changes to managed devices.
    E. Import interface mappings from managed devices.

  • Question 79:

    Examine the following partial outputs from two routing debug commands; then answer the question below:

    Why the default route using port2 is not displayed in the output of the second command?

    A. It has a lower priority than the default route using port1.
    B. It has a higher priority than the default route using port1.
    C. It has a higher distance than the default route using port1.
    D. It is disabled in the FortiGate configuration.

  • Question 80:

    View the exhibit, which contains the output of a diagnose command, and then answer the question below.

    Which statements are true regarding the output in the exhibit? (Choose two.)

    A. FortiGate will probe 121.111.236.179 every fifteen minutes for a response.
    B. Servers with the D flag are considered to be down.
    C. Servers with a negative TZ value are experiencing a service outage.
    D. FortiGate used 209.222.147.3 as the initial server to validate its contract.

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Fortinet exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your NSE7_EFW-6.2 exam preparations and Fortinet certification application, do not hesitate to visit our Vcedump.com to find your solutions here.