NetApp NS0-504 Online Practice Questions and Exam Preparation

NetApp NS0-504 Online Questions & Answers

• Question 401:

  You have a Windows 2003 host using the NetApp ONTAP DSM MPIO environment with a FAS6000 high availability configuration running single image cfmode. When you disconnect a cable from the FC switch to a storage target port, how will the I/O fail over?

  A. I/O will fail over to any port on the original controller but NOT on the partner controller that is part of the associated portset. Choice of path will be controlled by the host's MPIO weighting table.
  B. I/O will fail over to any port on either controller that is part of the associated portset. Choice of path will be controlled by the host's MPIO weighting table.
  C. I/O will fail over to any port on the original controller that is part of the associated portset. Choice of path will be controlled by NetApp storage system igroup settings.
  D. I/O will fail over to any port on either controller that is part of the associated portset. Choice of path will be controlled by NetApp storage system igroup settings.
  B. I/O will fail over to any port on either controller that is part of the associated portset. Choice of path will be controlled by the host's MPIO weighting table.

• Question 402:

  When booting your NetApp storage system for the first time the system fails to boot. What should you do first to address this problem?

  A. You turn off your storage system and disk shelves, and then turn on the disk shelves. You then check the quick reference card that came with the disk shelf for information about LED responses.
  B. You re-download the boot image to the compact flash card, then reboot the system.
  C. You look for a description of the problem on the LCD and console. You then follow the instructions, if provided, on the LCD and console.
  D. You verify disk shelf compatibility and check the disk shelf IDs to verify that the disk shelf 1 (for DS14 series) must be connected to your system.
  C. You look for a description of the problem on the LCD and console. You then follow the instructions, if provided, on the LCD and console.

• Question 403:

  How many cluster switch(es) are required for a NetApp cluster?

  A. 1
  B. 2
  C. 4
  D. 6
  B. 2

• Question 404:

  What are two methods of protecting LUN overwrites using Snapshot copies on a volume with fractional reserve set to 0%? (Choose two)

  A. Snap Autodelete
  B. iGroup throttle
  C. LUN reset
  D. Volume AutoSize
  A. Snap Autodelete
  D. Volume AutoSize

• Question 405:

  Which is true of the SnapVault backup of a NetApp storage system?

  A. The file is the basic unit for SnapVault backup destination.
  B. The qtree is the basic unit for SnapVault backup destination.
  C. The volume is the basic unit of SnapVault backup destination.
  D. The directory is the basic unit for SnapVault backup destination.
  B. The qtree is the basic unit for SnapVault backup destination.

• Question 406:

  When adding expansion FC adapter cards to NetApp controllers running ONTAP 8.1 Cluster Mode or above, which resource should be consulted for optimum placement of the new cards in the controller slots?

  A. Hardware Universe Tool accessed from support.netapp.com
  B. Data ONTAP product documentation release notes on the NOW site
  C. Interoperability Matrix Tool
  D. Data ONTAP SAN Administration Guide for Cluster-Mode
  D. Data ONTAP SAN Administration Guide for Cluster-Mode

• Question 407:

  When assessing a current storage solution, it is critical to document the current NetApp storage system configuration. Which factor should NOT be considered when documenting this existing configuration?

  A. Data ONTAP version
  B. current data layout (RAID groups, aggregates, volumes, etc...)
  C. storage system name and IP
  D. host power cables and power usage
  D. host power cables and power usage

• Question 408:

  What is the correct format for the scheduling component of a SnapVault schedule?

  A. cnt[@day_list][@hour_list]
  B. YYYY-MM-DD
  C. Crontable format
  D. List of dates in ISO Date format
  A. cnt[@day_list][@hour_list]

• Question 409:

  How does the NetApp Remote Agent (RSA) connect to NetApp Support?

  A. NetApp Support initiates a non-secure connection to the RSA.
  B. NetApp Support initiates a secure connection to the RSA.
  C. The RSA initiates a secure connection to NetApp Support.
  D. The RSA initiates a non-secure connection to NetApp support.
  C. The RSA initiates a secure connection to NetApp Support.

• Question 410:

  Which NetApp Storage Tier component works controller-wide on a FAS controller?

  A. Flash Pool
  B. Flash Disk
  C. Flash Accel
  D. Flash Cache
  E. Flash IO
  D. Flash Cache