Microsoft Microsoft Certifications MB-320 Questions & Answers

• Question 141:

  A company is implementing Dynamics 365 Supply Chain Management. The company uses the Landed cost module so that all shipping costs can be tracked within the system.

  The company is purchasing reusable shipping receptacles to ship goods from its top vendor in Taiwan to its manufacturing plant in Dublin, Ireland. Each shipping receptacle will be identified and tracked by using a unique number. For efficiency and cost savings, each container must be loaded to capacity before leaving the dock.

  The company must be able to track the containers as a separate expense in the general ledger.

  You need to configure the appropriate components.

  Which three components must you configure? Each correct answer presents part of the solution.

  NOTE: Each correct selection is worth one point.

  A. Shipping container type

  B. Vessel

  C. Cost type code

  D. Vendor cost type group

  E. Load

  F. Shipping container

  Correct Answer: ABF

  Explanation:

  Landed cost concepts

  The following table summarizes some core concepts of Landed cost.

  *

  Shipping container type - Shipping container types can determine the price for a cost type (for example, freight). They also provide useful shipping information.

  *

  Vessel - A vessel is the medium that is used to transport goods, such as a ship or an airplane.

  *

  Shipping container - Shipping containers store purchase order lines. They are a level below the shipment level. They are typically used if costs are apportioned for goods by container, or if receiving is done per container.

  *

  Etc. (does not include Cost type code, Vendor cost type group, or Load)

  Reference: https://learn.microsoft.com/en-us/dynamics365/supply-chain/landed-cost/landed-cost-overview

• Question 142:

  A client subcontracts production work to a vendor for production operations.

  You need to model subcontracting of route operations in production orders.

  Solution: Ensure that the material routing process is independent of the services procurement process.

  Does the solution meet the goal?

  A. Yes

  B. No

  Correct Answer: B

  Explanation:

  There are two methods for modeling subcontracting work for production operations. These methods differ in the way that the subcontracting process can be modeled, the way that semi-finished products are represented in the process, and

  the way that cost control is managed.

  *

  Subcontracting of route operations in production orders or batch orders

  The service product must be a stocked product, and it must be part of the BOM.

  This method supports first in, first out (FIFO) or standard cost.

  Semi-finished products are represented by the service product in the process.

  Cost control allocates the costs that are associated with subcontracted work to the material costs.

  *

  Subcontracting of production flow activities in a lean production flow

  The service is a non-stocked service product, and it isn't part of the BOM.

  This method uses purchase agreements as service agreements.

  This method uses backflush costing.

  This method allows for aggregated and asynchronous procurement. (Material flow is independent of the procurement process.)

  Cost control allocates subcontracted work in its own cost breakdown block.

  Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/manage-subcontract-work-production

• Question 143:

  A client subcontracts production work to a vendor for production operations.

  You need to model subcontracting of route operations in production orders.

  Solution: Ensure that subcontracting of route operations supports back-flush costing.

  Does the solution meet the goal?

  A. Yes

  B. No

  Correct Answer: B

  Explanation:

  There are two methods for modeling subcontracting work for production operations. These methods differ in the way that the subcontracting process can be modeled, the way that semi-finished products are represented in the process, and

  the way that cost control is managed.

  *

  Subcontracting of route operations in production orders or batch orders

  The service product must be a stocked product, and it must be part of the BOM.

  This method supports first in, first out (FIFO) or standard cost.

  Semi-finished products are represented by the service product in the process.

  Cost control allocates the costs that are associated with subcontracted work to the material costs.

  *

  Subcontracting of production flow activities in a lean production flow

  The service is a non-stocked service product, and it isn't part of the BOM.

  This method uses purchase agreements as service agreements.

  This method uses backflush costing.

  This method allows for aggregated and asynchronous procurement. (Material flow is independent of the procurement process.)

  Cost control allocates subcontracted work in its own cost breakdown block.

  Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/manage-subcontract-work-production

• Question 144:

  A company uses Dynamos J65 Supply Chat Management.

  The marketing group needs to be able to view a manufacturer's suggested retail price (MSRP) (or a new bill of materials (BOM) item when the cost of the BOM item is calculated.

  You need to configure the functionality.

  What should you do?

  A. Use the category price rules to generate a trade agreement with the sales price.

  B. Add a profit setting percentage to a cost group.

  C. Add a profit setting percentage to the released BOM product

  D. Set the sales price model field on the calculation group to item sales price.

  E. Add a profit setting percentage to a calculation group.

  Correct Answer: E

• Question 145:

  You must ensure that the firepit product is available for sale. How should the product be released?

  A. Release the engineering product version and then assign the route.

  B. Connect the BOM to an engineering product version before release.

  C. Connect a route to an engineering version before release.

  D. Release the engineering product version and then assign BOM.

  Correct Answer: B

• Question 146:

  You need to enable the features and configuration keys for the firepits.

  Which two features should you enable? Each answer presents part of the solution.

  NOTE: Each correct selection is worth one point

  A. Engineering attributes

  B. Change management for process manufacturing

  C. Engineering product variants

  D. Engineering change management

  E. Production floor execution management

  Correct Answer: AD

• Question 147:

  A product is produced through lean manufacturing. The cleaning and inspection is performed by a contractor as an activity of a production flow.

  You need to assign the appropriate cost group type for the subcontracted work.

  Which cost group type should you use?

  A. Direct material

  B. Indirect

  C. Undefined

  D. Direct manufacturing

  E. Direct outsourcing

  Correct Answer: E

  Explanation:

  In Microsoft Dynamics 365 Supply Chain Management, there are two approaches for subcontracting: production orders and lean manufacturing. In the lean manufacturing approach, the subcontracting work is modeled as a service that is

  related to an activity of a production flow. A special type of cost group type that is named Direct outsourcing has been introduced, and the subcontracting services are no longer part of a bill of materials (BOM). The cost accounting of

  subcontracted work is fully integrated into the costing solution for lean manufacturing.

  Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/activity-based-subcontracting

• Question 148:

  A client subcontracts production work to a vendor for production operations.

  You need to model subcontracting of route operations in production orders.

  Solution: Ensure that cost control allocates subcontracted work in its own cost breakdown block.

  Does the solution meet the goal?

  A. Yes

  B. No

  Correct Answer: B

  Explanation:

  There are two methods for modeling subcontracting work for production operations. These methods differ in the way that the subcontracting process can be modeled, the way that semi-finished products are represented in the process, and

  the way that cost control is managed.

  *

  Subcontracting of route operations in production orders or batch orders

  The service product must be a stocked product, and it must be part of the BOM.

  This method supports first in, first out (FIFO) or standard cost.

  Semi-finished products are represented by the service product in the process.

  Cost control allocates the costs that are associated with subcontracted work to the material costs.

  *

  Subcontracting of production flow activities in a lean production flow

  The service is a non-stocked service product, and it isn't part of the BOM.

  This method uses purchase agreements as service agreements.

  This method uses backflush costing.

  This method allows for aggregated and asynchronous procurement. (Material flow is independent of the procurement process.)

  Cost control allocates subcontracted work in its own cost breakdown block.

  Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/manage-subcontract-work-production

• Question 149:

  A company produces and distributes seafood to supermarkets. During the manufacturing process, raw seafood is purchased, cleaned, and packaged into various-sized boxes. Each box may have a different weight.

  Product is sold by the box and priced by the pound.

  You need to ensure that you can perform transactions at the box level and record the net weight of goods shipped to a customer.

  Solution: Set up a unit sequence group on the item for both pounds and boxes, then set a standard unit conversion for the product from box to pounds.

  Does the solution meet the goal?

  A. Yes

  B. No

  Correct Answer: B

• Question 150:

  A company has a Dynamics 365 Supply Chain Management implementation. The company plans a promotional sales campaign that targets top customers.

  The sales campaign will guarantee that orders are delivered within a specific two-week period.

  The system configuration must prioritize a group of similar production orders so they can be scheduled at the same time.

  You need to configure the system.

  What should you create?

  A. Production pool

  B. Production group

  C. Production flow model

  D. Production unit

  Correct Answer: A