CompTIA JK0-802 Online Practice Questions and Exam Preparation

CompTIA JK0-802 Online Questions & Answers

• Question 531:

  Joe, a user, copies a text document off of a CD drive into a folder. Joe has full control permissions on the folder. When Joe tries to edit and save the document, the system prompts him to save it to a new location. Which of the following is the reason for this behavior?

  A. The file properties are set to Read Only
  B. The CD was damaged and transferred the file incorrectly
  C. The original file was corrupted
  D. The file has an incorrect file extension
  A. The file properties are set to Read Only

• Question 532:

  A technician wants to verify a remote printer that has been power cycled is back online. The technician would use which of the following commands and switch?

  A. tracert -t
  B. ipconfig /renew
  C. ping -t
  D. nslookup -ttl
  C. ping -t

• Question 533:

  Joe, a technician, would like to map a network drive when he starts up his computer in the morning. Which of the following commands would he use to accomplish this task?

  A. NSLOOKUP
  B. NETSTAT
  C. NBTSTAT
  D. NET
  D. NET

  ---

  Reference: http://pcsupport.about.com/od/commandlinereference/p/net-command.htm

• Question 534:

  Which of the following BEST prevents attackers from accessing network equipment?

  A. Firewall
  B. Privacy filter
  C. Antivirus software
  D. Server
  A. Firewall

• Question 535:

  After several passes with a malware removal program, the program keeps detecting the same malware infection after a reboot. Which of the following should be done to attempt to remove the offending malware?

  A. Run the malware removal program while disconnected from the Internet
  B. Run the malware removal program in Windows Safe Mode
  C. Reinstall the malware removal program from a trusted source
  D. Set the malware removal program to run each time the computer is rebooted
  B. Run the malware removal program in Windows Safe Mode

  ---

  Reference: http://www.pcworld.com/article/243818/how_to_remove_malware_from_your_windows_pc. html

• Question 536:

  Which of the following file system types is used primarily for optical media?

  A. FAT32
  B. NTFS
  C. HPFS
  D. CDFS
  D. CDFS

  ---

  Reference: http://www.computerhope.com/jargon/c/cdfs.htm

• Question 537:

  A user reports that their wireless connectivity is being spotty. The issue seems to interrupt their wireless signal connection when the laptop screen is tilted forward or backward during operation. When this happens, the entire wireless signal drops out until the screen is left in position for a good minute or so. Which of the following MOST likely explains what is happening?

  A. The hinges on the laptop screen are not strong enough to support the wireless signal cables.
  B. The wireless card is losing contact to its socket when the screen is opening/closing.
  C. The laptop is designed to work optimally with wireless when the screen is at a perfect 90 degree angle.
  D. The wireless signal cables are being crimped when the screen is opening/closing.
  D. The wireless signal cables are being crimped when the screen is opening/closing.

  ---

  Reference: http://compnetworking.about.com/od/wirelessfaqs/f/wifilaptoprange.htm

• Question 538:

  Which of the following tools and test equipment is routinely magnetized and should be used with caution around magnetic media?

  A. Screwdrivers
  B. Power supply testers
  C. Cable testers
  D. Pliers
  A. Screwdrivers

  ---

  Reference: http://www.chabotcollege.edu/faculty/netacad/prot/ITE/course/module2/2.2.4.3/2.2.4.3.html

• Question 539:

  SIMULATION

  A user has installed two new drives in one of the computers in the computer lab and has been unable to format Disk1 from the command prompt.

  The lab requires that Disk1 be a dynamic disk configured with two partitions. The first partition must be 256,000 MB in size and mapped to drive F. The second partition must be 512,000 MB in size and mapped to drive G.

  The new partitions must be formatted to ensure that users' files can be secured from other users and that the disk must be configured to account for future redundancy.

  Instructions: Conduct the necessary steps within the Disk Manager to accomplish these tasks. When you have completed the simulation, please select the Done button to submit.

  

  Correct Answer. Check the answer below:
  Check the answer below:

  ---

  1. Right click on disk 1, click on initialize

  2. Choose disk and option as MBR. Hit ok.

  3. Again, right click on disk 1 and choose convert to dynamic disk.

  4. Now right click on disk 1 and choose new simple volume.

  5. Specify storage as 256000 and assign a drive letter F and choose file system as NTFS and click finish.

  6. Do the same thing for rest of space of disk 1, assigning 512000MB and using Disc G

• Question 540:

  A technician receives a trouble ticket stating that a user is receiving error messages on their computer. When the technician arrives at the computer, it is now working with no error messages being displayed. Which of the following should the technician use to determine what the error message was?

  A. MSINFO32
  B. EVENTVWR
  C. DXDIAG
  D. REGSVR32
  B. EVENTVWR