HP HPE6-A79 Online Practice Questions and Exam Preparation

HP HPE6-A79 Online Questions & Answers

• Question 41:

  Refer to the exhibit.

  

  Based on the output shown in the exhibit, which channel offers the highest quality?

  A. Channel 1
  B. Channel 6
  C. Channel 11
  D. Channel 14
  B. Channel 6

• Question 42:

  A company plans to build a resort that includes a hotel with 1610 rooms, a casino, and a convention center. The company is interested in a mobility solution that provides scalability and a service-based approach, where they can rent the

  WLAN infrastructure at the convention center to any customer (tenant) that hosts events at the resort.

  The solution should provide:

  Seamless roaming when users move from the hotel to the casino or the convention center

  Simultaneous propagation of the resort and customer-owned SSIDs at the convention center

  Null management access upon resort network infrastructure to the customers (tenants)

  Configuration and monitor rights of rented SSIDs to the customers (tenants)

  Which deployment meets the requirements?

  A. Deploy an MM-MC infrastructure with multizone AP's, with one zone for tenant SSIDs.
  B. Deploy IAPs along with AirWave, and deploy role-based management access control.
  C. Deploy IAPs with zone based SSIDs and manage them with different central accounts.
  D. Deploy an MM-MC infrastructure, and create different hierarchy groups for MCs and APs.
  E. Deploy IAPs, and manage them with different central accounts.
  E. Deploy IAPs, and manage them with different central accounts.

• Question 43:

  A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200+ Aps on a medium-size branch office. Next, the technician cabled the appliance with 4SPF+ Direct Attached Cables (DACs) distributed between two-member switching stack and powered it up.

  What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?

  A. Map the four physical ports to port channel 0.
  B. Disable spanning tree and allocate unique VLANs to each port.
  C. Manually set 10Gbps speeds on all ports.
  D. Configure the same MSTP region that the switches have.
  E. Make all ports trunk interfaces and permit data VLANs.
  C. Manually set 10Gbps speeds on all ports.

• Question 44:

  Refer to the exhibit.

  

  A network administrator deploys a new Mobility Master (MM) - Mobility Controller (MC) network. To test the solution, the network administrator accesses the console of a pair of APs and statically provisions them. However, one of the APs does not propagate the configured SSIDs. The network administrator looks at the logs and sees the output shown in the exhibit.

  Which actions must the network administrator take to solve the problem?

  A. Create another AP group in the MC's configuration, and re-provision one AP with a different group.
  B. Re-provision one of the APs with a different name, and add new entries with the proper group in the whitelist.
  C. Re-provision the AP with a different group, and modify the name of one AP in the whitelist.
  D. Re-provision one of the APs with a different name or modify the name in the whitelist.
  D. Re-provision one of the APs with a different name or modify the name in the whitelist.

• Question 45:

  Refer to the exhibit.

  

  An organization provides WiFi access through a corporate SSID with an Aruba Mobility Master (MM) - Mobility Controller (MC) network that includes PEF functions. The organization wants to have a single firewall policy configured and applied to the employee role.

  This policy must allow users to reach Web, FTP, and DNS services, as shown in the exhibit. Other services should be exclusive to other roles. The client NICs should receive IP settings dynamically. Which policy design meets the organization's requirements while minimizing the number of policy rules?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  C. Option C

• Question 46:

  Refer to the exhibit.

  

  A network administrator wants to configure an 802.1x supplicant for a wireless network that includes the following:

  AES encryption EAP-MSCHAP v2-based user and machine authentication Validation of server certificate in Microsoft Windows 10

  The network administrator creates a WLAN profile and selects the change connection settings option. Then the network administrator changes the security type to Microsoft: Protected EAP (PEAP), and enables user and machine authentication under Additional Settings.

  What must the network administrator do next to accomplish the task?

  A. Change default RC4 encryption for AES.
  B. Enable user authentication under Settings
  C. Change the security type to Microsoft: Smart Card or other certificate.
  D. Enable server certificate validation under Settings.
  C. Change the security type to Microsoft: Smart Card or other certificate.

• Question 47:

  Refer to the exhibits.

  

  A user reports slow response time to a network administrator and suggests that there might be a problem with the WLAN. The user's phone supports 802.11ac in the 5 GHz band. The network administrator finds the user in the Mobility Master (MM) and reviews the output shown in the exhibit.

  What can the network administrator conclude after analyzing the data?

  A. The low SNR forces the client to back off to low MCs, therefore speed is low and retransmits are high.
  B. Client health is poor, but SNR is fair. TX power must be increased in both the client and the AP.
  C. Since SNR is good, then the high retransmit rate must be due a hidden node scenario or high interference.
  D. High Successful frame count and high Max Speed is an indication of a healthy client. Connection will improve at any time.
  D. High Successful frame count and high Max Speed is an indication of a healthy client. Connection will improve at any time.

• Question 48:

  Refer to the exhibits.

  

  

  A network administrator has fully deployed a WPA3 based WLAN with 802.1X authentication. Later he defined corp-employee as the default user-role for the 802.1X authentication method in the aaa profile. When testing the setup he realizes the client gets the "guest" role.

  What is the reason "corp-employee" user role was not assigned?

  A. The administrator forgot to map a dot1x profile to the corp-employee aaa profile.
  B. The administrator forgot to enable PEFNG feature set on the Mobility Master.
  C. MC 1 has not received the configuration from the mobility master yet.
  D. The Mobility Master lacks MM-VA licenses; therefore, it shares partial configuration only.
  C. MC 1 has not received the configuration from the mobility master yet.

• Question 49:

  Refer to the exhibit.

  

  A 7008 Branch Office Controller (BOC) is deployed in a remote office behind a core router. This core does not support 802.1q encapsulation. The Mobility Controller (MC) is the gateway for two tunneling mode SSIDs, as shown in the exhibit. Which two different configuration options ensure that wireless users are able to reach the branch network through the router? (Choose two.)

  A. Configure all ports of the BOC as access ports on the controller VLAN, and change the gateway of clients to the core router IP.
  B. Configure the uplink of the BOC as an access port on the controller VLAN, and add static routes in the router for the SSID VLAN subnets.
  C. Configure the uplink of the BOC as a trunk port that permits the controller and the SSID VLANs. The controller VLAN must be native.
  D. Configure the uplink of the BOC as an access port on the controller VLAN, and enable NAT for the SSID VLANs.
  E. Configure the uplink of the BOC as a trunk port, tagging the controller and the SSOD VLANs, and enable NAT for the SSID VLANs.
  B. Configure the uplink of the BOC as an access port on the controller VLAN, and add static routes in the router for the SSID VLAN subnets.
  E. Configure the uplink of the BOC as a trunk port, tagging the controller and the SSOD VLANs, and enable NAT for the SSID VLANs.

• Question 50:

  Refer to the exhibit

  

  A network administrator deploys a standalone Mobility Controller (MC) and configures some VAPs within the CAMPUS AP group. The network administrator realizes that none of the VAPs are being broadcasted. Based on the output shown in the exhibit, what should the network administrator do to solve this problem?

  A. Install MC-VA licenses, then install PEF licenses and enabled the PEF feature.
  B. Install MC-VA licenses, then reprovision the APs.
  C. Install MM licenses, then install PEF licenses and enable the PEF feature.
  D. Install MM licenses and install MC-VA licenses, then install RFP licenses.
  D. Install MM licenses and install MC-VA licenses, then install RFP licenses.