HP HPE6-A29 Online Practice Questions and Exam Preparation

HP HPE6-A29 Online Questions & Answers

• Question 61:

  Which parameter does a Master switch use to determine where a provisioned AP should terminate its GRE tunnel?

  A. at the IP address of the AP
  B. the MAC address of the AP
  C. the IP address of the switch nearest to the AP
  D. the name and group settings of the AP
  E. based on the VLAN of the AP
  D. the name and group settings of the AP

• Question 62:

  Which describe "roles" as used on Aruba Mobility Controllers? (Choose two)

  A. Roles are assigned to users.
  B. Roles are applied to interfaces.
  C. Policies are built from roles.
  D. A user can belong to only one role at a time.
  E. Roles are a set of authentication rules
  A. Roles are assigned to users.
  D. A user can belong to only one role at a time.

• Question 63:

  An administrator sets up a master-local topology. The administrator disables control plane security (CPSec) on all of the controllers and then configures the master and local controllers. Which protocol will be used between these controllers to tunnel management traffic once the inter-controller configuration has been completed?

  A. HTTPS
  B. GRE
  C. IPSec
  D. SSH
  B. GRE

• Question 64:

  When an 802.11 client roams what device decides when to move the client to another AP?

  A. Aruba AP
  B. Aruba controller
  C. Client
  D. Radius Server
  E. Router
  C. Client

• Question 65:

  An administrator configures wired access control for Aruba Remote APs (RAPs) located in the company's branch offices with these specifications: Some RAP Ethernet ports are set up as trunk ports.

  The RAP Ethernet ports are connected to a user's phone, and the data port on the phone is connected to the user's PC.

  -

  The phone traffic is tagged and the PC traffic is untagged on these trunk ports.

  The administrator defines the Ethernet port as untrusted, but the phone VLAN as trusted

  The administrator defines a global AAA profile and an AAA profile for the phone traffic on the tagged VLAN.

  How do the RAPs process the phone traffic?

  A. Apply the AAA profile to the phone traffic
  B. Allow all the phone traffic
  C. Apply the global profile to the phone traffic
  D. Drop all the phone traffic
  A. Apply the AAA profile to the phone traffic

• Question 66:

  What is true about Global Session ACL? (Choose two)

  A. Any rules will apply to all users in the AP-group
  B. Any rules will apply to all users in the Network
  C. Any rules will apply to all users in the controller
  D. Is in the first position in all roles
  E. When added it is in the first position in selected Role
  B. Any rules will apply to all users in the Network
  D. Is in the first position in all roles

• Question 67:

  A Remote AP provisioned with an SSID in the operational mode always has which one of the following characteristics?

  A. The RAP must obtain its configuration from the controller each time it boots.
  B. The operational mode applies to tunnel and split-tunnel forwarding SSID.
  C. The operational mode applies to a Bridge forwarding SSID.
  D. The RAP does not support this mode.
  E. The SSID only appears if the AP does not see the controller.
  C. The operational mode applies to a Bridge forwarding SSID.

• Question 68:

  Which command will show all client association history?

  A. show mobile trail current (ip address)
  B. show ip mobile trail (ip address)
  C. show ap client status (mac address)
  D. show current client ip (ip address)
  E. show client ip (ip address) mobility
  B. show ip mobile trail (ip address)

• Question 69:

  Which set of configuration commands are needed to make VLAN 10 the management VLAN?

  A. config# vlan 10 config# interface vlan 10 config-subif# ip address 10.10.10.1 255.255.255.0 config# controller-ip vlan 10
  B. config# vlan 10 config# interface vlan 10 config-subif# ip address 10.10.10.1 255.255.255.0 config-subif# management-vlan
  C. config# vlan 10 config-subif# interface vlan 10 config-subif# ip address 10.10.10.1 255.255.255.0 config-subif# management-vlan 10
  D. config# vlan 10 config-subif# interface vlan 10 config-subif# ip address 10.10.10.1 255.255.255.0 config-subif# default-management-vlan
  A. config# vlan 10 config# interface vlan 10 config-subif# ip address 10.10.10.1 255.255.255.0 config# controller-ip vlan 10

• Question 70:

  An administrator configures a new AP for the company's network. The AP has wired users connected to some of the Ethernet ports that will need to be authenticated with 802.1x. Currently, no policy exist to authenticate users connected to wired ports on the Aps.

  In the Aruba mobility controller web GUI, where should the administrator enable this wired ports to authenticate these users?

  A. Configuration > Network > ports
  B. Configuration > Security > Authentication
  C. Configuration > Wireless > Ap Configuration
  D. Configuration > Advanced > Wired Policies.
  C. Configuration > Wireless > Ap Configuration