Exam Details

  • Exam Code
    :HPE6-A29
  • Exam Name
    :Aruba Certified Mobility Professional 6.4
  • Certification
    :HP Certifications
  • Vendor
    :HP
  • Total Questions
    :60 Q&As
  • Last Updated
    :

HP HP Certifications HPE6-A29 Questions & Answers

  • Question 251:

    What does Adaptive Radio Management (ARM) allow controllers to provision?

    A. Optimal channels and power settings for Aps

    B. lower power when unauthorized Aps are detected

    C. configured radio bands

    D. radio type of the AP

  • Question 252:

    An AP 220 is configured with three SSID supported on both 2.4Ghz and 5Ghz bands. How many GRE tunnels will be created between the AP 220 and the controller?

    A. 2

    B. 4

    C. 6

    D. 7

  • Question 253:

    An Aruba controller is configured with the correct IP address and gateway information, and is connected to the corporate LAN through a core Layer 3 switch. Control Plane Security (CPSec) is not enabled on the network. An access point is provisioned with the AP name and group, and connected to a different Layer 2 switch on the corporate LAN that has IP connectivity to the core layer 3 switch. The AP powers on and Layer 2 connects to the network, but the wireless radios do not power on.

    What could cause this condition? (Select two)

    A. The AP's MAC address needs to be configured in the Aruba controller whitelist.

    B. The AP and controller are in different subnets.

    C. The Layer 2 switches have ACLs that block IPSec traffic.

    D. The Layer 2 switches are configured to block IPSec traffic.

    E. A DHCP server is not configured for the segment to which the AP is connected.

  • Question 254:

    How are aliases used?

    A. to assign rules to policies

    B. to assign policies to roles

    C. to tie IP addresses to ports

    D. to make rule configuration more scalable.

  • Question 255:

    An administrator receives a new Aruba Mobility Controller at its factory default configuration. The administrator accesses the console of the controller and answers the questions in the initial setup script. The administrator then logs into the controller through a web browser and runs the controller wizard to complete the initial setup of the controller.

    Which action can only be performed through the CLI?

    A. Set the date and time.

    B. Disable controller interfaces

    C. Add AP licenses

    D. identify the controller switch mode.

  • Question 256:

    An administrator supports a large campus WLAN infrastructure. A section of the warehouse building on the campus is no longer used. The administrator moves the Aruba Aps from the unused building section to a new location in the network. However, when the administrator connects the Aps to their new network location some of the Aps cannot find a local controller to establish a connection.

    What should the administrator do on these Aps to solve this problem?

    A. When booting access the Aps boot mode and define the correct AP group name.

    B. After booting access the Aps CLI and erase its configuration with the erase startup- configuration command.

    C. When booting access the Aps boot mode and execute the purgeenv command.

    D. After booting access the Aps CLI and define the master controller's IP address with the ipconfig command.

  • Question 257:

    Examine the configuration file segment from an Aruba Mobility Controller. ip access-list session anewone user network 10.1.1.0 255.255.255.0 any permit user host 10.1.1.1 any deny user any any permit What can administrator conclude from this?

    A. This is an extended Access Control List (ACL)

    B. Any traffic going to destination 172.16.197.713 will be permitted

    C. Any traffic going to destination 10.1.1.1 will be denied.

    D. This is a session firewall policy.

  • Question 258:

    Which method can Aps use to discover a controller?

    A. Dynamic DNS (DDNS)

    B. PAPI

    C. ADP broadcast

    D. HTTPS

  • Question 259:

    An administrator configures a Virtual AP (VAP) profile for an AP Group Which profiles must the administrator reference in the VAP configuration so that the VAP is functional and the WLAN can be used to connect wireless users to the network? (Select two.)

    A. AAA

    B. Radio Settings

    C. SSID

    D. VLAN Profile

    E. System Profile

  • Question 260:

    An administrator works in an environment in which the following has occurred.

    *

    A port firewall policy is applied to a trunk port which denies controller access

    *

    An Allow All VLAN firewall policy is applied to VLAN 33 on the same trunk port.

    *

    A user connected to VLAN 33 on the trunk port is trying to gain access to the controller. What is true about the controller accessibility in this scenario?

    A.

    The controller will be inaccessible since the VLAN policy is applied as well as the port policy.

    B.

    The controller will be accessible since the VLAN policy is applied.

    C.

    The controller will be inaccessible since the port policy is applied.

    D.

    The controller will be inaccessible since administrators cannot place a firewall policy on a port VLAN when the port already has a policy.

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only HP exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your HPE6-A29 exam preparations and HP certification application, do not hesitate to visit our Vcedump.com to find your solutions here.