HP HPE6-A29 Online Practice Questions and Exam Preparation

HP HPE6-A29 Online Questions & Answers

• Question 241:

  Which firewall rules allow a user to initiate ICMP and SSH sessions to other devices? (Select two)

  A. user any svc-ssh permit
  B. mswitch any svc-icmp permit
  C. localip any svc-icmp permit
  D. any any svc-icmp permit
  E. user user svc-icmp permit
  A. user any svc-ssh permit
  D. any any svc-icmp permit

• Question 242:

  A Master switch can serve as an AP backup for a local switch.

  A. True
  B. False
  A. True

• Question 243:

  Examine this configuration file segment of an Aruba Mobility Controller ip access-list session anewone user network 10.1.1.0 255.255.255.0 any permit user host 10.1.1.1 any deny user any any permit What can an administrator conclude from this file segment? (Select three)

  A. Any traffic originating from 10.1.1.1 will be denied
  B. Any traffic going to destination 172.16.100.100 will be permitted
  C. Any traffic going to destination 10.1.1.1 win be denied
  D. This is an Ethertype Access Control List (ACL)
  E. This is an extended Access Control List (ACL)
  F. Any Traffic going to destination 10.2.2.2. will be denied.
  B. Any traffic going to destination 172.16.100.100 will be permitted
  D. This is an Ethertype Access Control List (ACL)
  E. This is an extended Access Control List (ACL)

• Question 244:

  A master fails in a master-local topology with central licensing enabled. There is no standby server configured. What happens to the local controllers?

  A. Local controllers continue to operate for 30 days and accept new Aps.
  B. Local controllers operate with active Aps, but will not accept any other Aps.
  C. Local controllers can only use their originally-installed licenses.
  D. Local controllers continue to operate for the length of their license subscription.
  A. Local controllers continue to operate for 30 days and accept new Aps.

• Question 245:

  With CPSec enabled, which tunnel protocol is used between APs and Controllers in an Aruba environment?

  A. EAP
  B. SSH
  C. IPinIP
  D. Mobile IP
  E. IPSec
  E. IPSec

• Question 246:

  How does the ARM Band Steering feature encourage 5GHz capable clients to move/connect to the 5GHz radios of Aruba APs?

  A. ARM suppresses the probe responses on the 2.4 ghz radio?
  B. ARM utilizes third party software on the wireless clients
  C. Current Wi-Fi chipset firmware supports this by default
  D. It's not possible the move clients to 5GHz radios when they can see both 2.4 and 5GHz APs
  E. ARM disables the 2.4Ghz radio for the specified client
  A. ARM suppresses the probe responses on the 2.4 ghz radio?

• Question 247:

  Exhibit:

  

  Referring to the diagram provided for this question, an employee brought an unauthorized AP from home, but did not attach it to the LAN infrastructure. The APs are in the VLANs as shown in the diagram. Only AP1 is within RF range of the employee AP.

  By default, how will the Aruba system classify the employee's AP?

  A. an AP
  B. an AM
  C. a Rogue AP
  D. an Interfering AP
  E. a valid workstation
  D. an Interfering AP

• Question 248:

  A user connected to a Captive Portal VAP successfully. When the user opens their browser and tries to access their homepage, they get redirected as expected to another URL on the Aruba Controller. However, they see an error message that web authentication has been disabled. What might be a cause of this?

  A. Captive Portal has not been assigned in the SSID profile.
  B. The Captive portal profile has not been assigned to the AAA profile.
  C. A server group has not been assigned to the captive portal profile.
  D. An initial role has not been assigned to the AAA profile.
  E. The Captive portal profile has not been assigned to the initial role.
  E. The Captive portal profile has not been assigned to the initial role.

• Question 249:

  How can a role be assigned to a user, connected to an untrusted port, on a controller?

  A. An initial Role can be assigned
  B. Roles are assigned to users connected to a trusted port
  C. Captive Portal default Role can be assigned
  D. Adding a wired AAA profile to a VLAN on the port
  E. The Role assigned to the Port
  A. An initial Role can be assigned
  C. Captive Portal default Role can be assigned
  D. Adding a wired AAA profile to a VLAN on the port

• Question 250:

  What is the blacklist default time?

  A. 30 seconds
  B. 1800 seconds
  C. 3600 seconds
  D. No default time, it must be done manually
  E. 1 day
  C. 3600 seconds