HP HPE6-A29 Online Practice Questions and Exam Preparation

HP HPE6-A29 Online Questions & Answers

• Question 131:

  (group8) #show ap arm history ap-name AP1 Interface :wifi0 ARM History

  Time of Change Old Channel New Channel Old Power New Power Reason

  2015-1-28 07:58:53 157+ 149+ 21 21 I 2015-1-28 07:52:06 149+ 157+ 21 21 M 2015-1-28 07:16:59 157+ 149+ 21 21 I Interface :wifi1 ARM History

  Time of Change Old Channel New Channel Old Power New Power Reason

  2015-1-28 08:52:53 6 1 21 21 I

  Referring to the output above. What can you conclude about AP1?

  A. This device is scanning channels.
  B. This device is unstable because the channel assignment changed.
  C. The device changed channels recently.
  D. The device changed channels and power levels recently.
  E. The device is transmitting at maximum power levels.
  C. The device changed channels recently.

• Question 132:

  What are the different methods of configuring AP redundancy between 2 local controllers?

  A. Active-Active VRRP
  B. Configure the locals as remote nodes
  C. Use named VLANS
  D. LMS and Backup LMS IP
  E. AP Redundancy can only be configured between a Master and Local
  A. Active-Active VRRP
  D. LMS and Backup LMS IP

• Question 133:

  When configuring split tunnel mode on a Remote AP (RAP) where is the routing function for the split tunnel defined?

  A. On the IP routing tab in the configuration screen.
  B. On the AP provisioning screen.
  C. In the RAP static routing tables
  D. In the Firewall policy
  E. In the RAP whitelist
  D. In the Firewall policy

• Question 134:

  An AP resolved DNS and found the master controller. How will this AP be redirected to a Local controller?

  A. Based on the AP-Groups CONTROLLER-IP attribute
  B. Based on the AP-Groups LMS-IP attribute
  C. In AP-provisioning set the LMS-IP attribute
  D. Must be statically configured to find the local controller E. In AP-Provisioning set the CONTROLLER-IP attribute
  B. Based on the AP-Groups LMS-IP attribute

• Question 135:

  Which description of client match are accurate? (Choose Two)

  A. performs spectrum load balancing
  B. performs load balancing
  C. moves higher traffic devices to adjacent Aps
  D. sends QRT frames to neighbor Aps
  E. performs enhanced AP reassignment
  B. performs load balancing
  E. performs enhanced AP reassignment

• Question 136:

  Which of the following statements is true of Spectrum Mode?

  A. No licenses are required to run an AP in Spectrum mode
  B. Spectrum mode can only be configured for one AP at a time
  C. An AP can be in spectrum mode for both 2.4 and 5G bands at the same time
  D. An AP can be placed in Spectrum Mode via the Spectrum Profile
  E. Spectrum mode can be configured from the GUI under AP installation
  C. An AP can be in spectrum mode for both 2.4 and 5G bands at the same time

• Question 137:

  Which of the following will occur if a master license server fails with no standby server present? (Choose two)

  A. Local controllers licenses will continue to be valid for 30 days
  B. Local controllers will immediately remove all installed licenses
  C. No licenses will be sent to any new controllers that come online
  D. All licenses go back into the pool for redistribution
  E. A Local Controller elects itself master license server
  A. Local controllers licenses will continue to be valid for 30 days
  C. No licenses will be sent to any new controllers that come online

• Question 138:

  Which description of the adaptive Radio Management (ARM) spectrum Load Balancing feature is accurate? (Select two)

  A. It is enabled by default.
  B. It only affects the association of new clients.
  C. It is available only on 5GHz radios.
  D. It is disabled by default.
  E. It is available only on 2.4 GHz radios.
  B. It only affects the association of new clients.
  D. It is disabled by default.

• Question 139:

  

  Referring to the diagram provided for this question, an employee brought an unauthorized AP from home and attached the LAN port to the cubicle Ethernet port. All Aruba APs and AMs as well as the employee AP are in VLAN 80 and within RF range of each other. No traffic from the wired or wireless network has passed through the unauthorized AP yet, but the AP began wireless broadcasts.

  How will the Aruba system initially classify the employee's non-Aruba AP?

  A. a valid AP
  B. an AM
  C. a Rogue AP
  D. an interfering AP
  E. a known interfering AP
  D. an interfering AP

• Question 140:

  The corporation has deployed hundreds of RAP3 and all are working. A user has received a RAP3 from the IT department. At his home he connects the Ethernet port to his DSL modem. The corporate SSID is not advertises but an Instant SSID is. What could be the problem?

  A. This RAP was purchased as an IAP and not as a RAP
  B. The activate server does not have this RAPs configured
  C. The corporate Firewall is blocking VPN
  D. The RAP3 must be pre-staged
  E. The user must connect his laptop, get the Zero touch window and enter the URL
  B. The activate server does not have this RAPs configured