HP HPE0-S59 Online Practice Questions and Exam Preparation

HP HPE0-S59 Online Questions & Answers

• Question 51:

  Which statement about the SY480 Gen10 Plus Compute Module is true?

  A. It cannot be mixed with Gen9 compute modules in the same frame.
  B. It supports 8 memory channels and memory DIMMs of up to 256GB.
  C. It only supports NVDIMM Persistent Memory.
  D. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
  A. It cannot be mixed with Gen9 compute modules in the same frame.

• Question 52:

  Your customer changed the storage pool state from managed to discovered. What is the impact of that change?

  A. This storage pool can be deleted using HPE OneView interface.
  B. All volumes from that pool will be removed from HPE OneView.
  C. Volume provisioning will be disabled for that storage pool.
  D. Storage pool parameters cannot be modified using HPE OneView.
  C. Volume provisioning will be disabled for that storage pool.

• Question 53:

  You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.

  Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

  A. App Volume Set
  B. Storage Container
  C. Virtual Volume Set
  D. virtual Volume
  B. Storage Container

• Question 54:

  Which statement about the HPE OneView Update Readiness Checker is true?

  A. It can be used to verify compatibility of a given Synergy Service Pack with a specific version of HPE OneView.
  B. It can be used to evaluate the health of an HPE OneView appliance before proceeding with an appliance update.
  C. It can be used to examine the firmware version installed on compute nodes and compliance with HPE OneView version.
  D. It can be used to determine whether the latest milestone HPE OneView edition is currently installed.
  B. It can be used to evaluate the health of an HPE OneView appliance before proceeding with an appliance update.

• Question 55:

  Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:

  1.HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules

  2.two HPE Virtual Connect SE 100Gb F32 Modules for Synergy

  3.an appropriate number of the vSphere Standard licenses for each compute node

  4.one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?

  A. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
  B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
  C. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
  D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
  B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features

• Question 56:

  One of the administrators added some connections within a server profile that was created using a template. This server profile did not report inconsistency. What is the most likely reason for this behavior?

  A. The administrator removed FC connections that are not monitored by default.
  B. Connections defined in the server profile are not monitored for compliance.
  C. Consistency check for connections is set to Minimum or Not checked.
  D. The server is in maintenance mode and does not report any issues.
  C. Consistency check for connections is set to Minimum or Not checked.

• Question 57:

  Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.

  Which statement regarding this setup is true?

  A. Each compute node must have at least 768GB of memory installed
  B. Interconnect modules that provide SAS connectivity should be moved to the third fabric
  C. Each interconnect module in each fabric must be properly licensed in HPE OneView
  D. Compute nodes must have a second CPU installed to access the second fabric.
  D. Compute nodes must have a second CPU installed to access the second fabric.

• Question 58:

  DRAG DROP

  Match HPE SimpliVity term with the definition.

  Select and Place:

  

  

• Question 59:

  Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol

  What must be done to complete this task?

  A. Enable FC primary and secondary boot on the modules through the HPE OneView interface
  B. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
  C. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
  D. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
  A. Enable FC primary and secondary boot on the modules through the HPE OneView interface

• Question 60:

  Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?

  A. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
  B. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
  C. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
  D. The customer can add a new logical enclosure to an existing setup once all required licenses are added to HPE OneView and associated with the new frames.
  C. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.