HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 231:

  Which tool can be used to upgrade the firmware of 3Gb SAS BL Switch?

  A. Virtual SAS Manager
  B. System Insight Manager
  C. Virtual Connect Manager
  D. Centralized Management Console
  A. Virtual SAS Manager

• Question 232:

  A customer purchased a c7000 blade enclosure, fully populated with blade Gen8 servers and Care Pack services. Several days later, the customer purchased an HPZR30W, an HP UPS R8000/3, and two iPDUs. Which new items will be covered in the Care Pack services? (Select two.)

  A. both iPDUs if they are mounted in a different rack from the c7000
  B. the ZR30W (30 inch) monitor put on top of a rack.
  C. both iPDUs if they are mounted in the smae rack as the c7000
  D. the UPS R8000/3 if it is mounted in another rack
  E. the UPS R8000/3 if it is in the same rack as the c7000
  A. both iPDUs if they are mounted in a different rack from the c7000
  C. both iPDUs if they are mounted in the smae rack as the c7000

• Question 233:

  Which information can you find on Insight Display?

  A. server memory errors
  B. server mezzanine errors
  C. server hard drive errors
  D. server Smart Array
  B. server mezzanine errors

• Question 234:

  Which technologies are supported on a G7 or Gen8 server blade when the appropriate mezzanine card is installed in a server along with the FlexFabric interconnects? (Select two.)

  A. iSCSI
  B. Infiniband
  C. Accelerated Ethernet
  D. Adaptive FC
  E. FCoE
  A. iSCSI
  E. FCoE

• Question 235:

  A customer recently lost data due to a failed disk drive in their BL460c Server. What should you recommend to minimize data loss in case of disk drive failure in the future?

  A. Upgrade to RAID 0.
  B. Upgrade to RAID 1.
  C. Upgrade to RAID 5.
  D. Upgrade to RAID 0+1.
  C. Upgrade to RAID 5.

• Question 236:

  Which type of memory can the Advanced Memory Buffer (AMB) in the Insight Diagnostics Offline Edition test?

  A. Fully Buffered DIMMs
  B. Unbuffered DIMMs
  C. Registered DIMMs
  D. Low Power DIMMs
  A. Fully Buffered DIMMs

• Question 237:

  When should a performance baseline be captured?

  A. after the initial installation of the equipment, during normal daily operation
  B. after the initial installation of the equipment, during peak operating conditions
  C. before and after each step of the initial installation of the equipment
  D. three times a day during the first week following the initial installation of the equipment
  A. after the initial installation of the equipment, during normal daily operation

• Question 238:

  Technician is installing HP ProLiant servers at different customer sites. Since the technician wants to have the ProLiant equipped with the latest firmware level available, what is the best solution?

  A. Before going onsite, the technician should download the latest SmartStart Firmware CD and use this SmartStart Firmware CD for deploying the latest firmware.
  B. The technician should download the latest SmartStart firmware CD and add the firmware releases published after the release of the latest SmartStart Firmware CD to the \compaq\swpackages on the CD-ROM.
  C. The technician should create a bootable USB stick containing the latest SmartStart Firmware CD and add the firmware releases published after the release of the latest SmartStart Firmware CD to the \compaq\swpackages on the USB stick.
  D. Before going onsite, the technician should download the latest SmartStart Firmware CD. The technician should download the firmware releases published after the release of the latest SmartStart Firmware CD and save these images on floppies. The SmartStart Firmware CD and downloaded images on floppy are used for deploying the latest firmware.
  C. The technician should create a bootable USB stick containing the latest SmartStart Firmware CD and add the firmware releases published after the release of the latest SmartStart Firmware CD to the \compaq\swpackages on the USB stick.

• Question 239:

  Which processor type is used with the HP BL460c G6 Server Blade?

  A. Dual-Core Intel?Itanium?Processor
  B. Intel?Xeon?Processor
  C. HP PA-RISC FSB, double data rate
  D. AMD Opteron processor
  B. Intel?Xeon?Processor

• Question 240:

  A system engineer wants to replace the c3000 BladeSystem Insight Display. What must be done before the engineer can remove it? (Select two.)

  A. The server blade must be removed from the bay.
  B. Onboard Administrator link module must be removed.
  C. The Insight Display data cable must be disconnected.
  D. The Onboard Administrator tray must be removed.
  E. The enclosure cover to access Insight Display must be removed.
  C. The Insight Display data cable must be disconnected.
  D. The Onboard Administrator tray must be removed.