HP HP2-K34 Online Practice Questions and Exam Preparation

HP HP2-K34 Online Questions & Answers

• Question 41:

  Which statement describes the HP 3PAR Remote Support process?

  A. It uses a dedicated VPN to perform all remote diagnostics from the HP 3PAR Central
  B. It enables the customer to use HP 3PAR Remote Support capabilities with WBEM and System Event Analyzer.
  C. It enables Remote Support activities by using HP Insight Remote Support.
  D. It uses secure service communication between the storage system and HP 3PAR Central.
  D. It uses secure service communication between the storage system and HP 3PAR Central.

• Question 42:

  You are preparing a solution for a customer who has the following requirements:

  -Support for 10Gbit iSCSI and 8Gbit Fibre Channel

  -Scaleable to 24 drive chassis and 960 drives

  -

  Support for up to 64 GB control cache

  -

  Support for SAS drives

  Which HP 3PAR StoreServ system should you recommend?

  A. HP 3PAR StoreServ 7200
  B. HP 3PAR StoreServ 7400
  C. HP 3PAR StoreServ 10400
  D. HP3PAR StoreServ 10800
  D. HP3PAR StoreServ 10800

• Question 43:

  Which statement best describes the functionality of the 3PAR Service Processor InSplore application?

  A. It queries the health of the storage system and sends it to HP.
  B. It allows access to the Service Process file system.
  C. It is a graphic navigation tool to view system logs
  D. It takes a snapshot of the whole Service Processor.
  A. It queries the health of the storage system and sends it to HP.

• Question 44:

  You are installing an HP 3PAR StoreServ 10800. The customer needs persistent ports to enable a node pair to transparently failover and back with no interruption or pause of the host I/O during an upgrade or node failure. Which best practices should you recommend to meet this requirement? (Select two.)

  A. All controller ports from a single node should be connected to the same fabric.
  B. StoreServ controller nodes should be connected to alternate fabrics.
  C. Host ports should be zoned in partner pairs.
  D. Host ports require port-based zoning
  E. Ports of the same pair of nodes with the same ID should be connected to the same fabric
  C. Host ports should be zoned in partner pairs.
  E. Ports of the same pair of nodes with the same ID should be connected to the same fabric

• Question 45:

  You are using Virtual Copy in conjunction with a vSphere ESXi infrastructure. What must you consider in order to achieve optimal performance?

  A. To recover a virtual machine from a Virtual Copy, you must mount the Datastore, add the VM to the Inventory, and migrate the machine back to the vmfs Datastore
  B. A minimum user-level privilege of Browse is required for Virtual Copy operations, and the user- level privilege of Edit is required for virtual volume operations to recover a virtual machine.
  C. If the Virtual Volumes are used in a Transparent Failover configuration, local Virtual Copies will automatically be enabled,
  D. If the number reaches the maximum limitation of 500 Virtual Copies, the newest Virtual Copy overwrites the last created
  C. If the Virtual Volumes are used in a Transparent Failover configuration, local Virtual Copies will automatically be enabled,

• Question 46:

  When using Service Tools and Technical Support (STaTS), which pieces of information can you enter to perform a sales upgrade? (Select two.)

  A. HP 3PAR Storage Systems configuration file
  B. 3PAR serial number
  C. customer Service Agreement ID
  D. HP serial number
  E. HP 3PAR Storage System product number
  A. HP 3PAR Storage Systems configuration file
  B. 3PAR serial number

• Question 47:

  You are discussing solutions with a customer who wants to use Peer Motion on the HP 3PAR StoreServ 7400. The customer inquires about the specific requirements and limitations of this solution. What should you tell them to consider?

  A. A maximum of 150 Peer Motion migration tasks can be created by PMM, but only nine of them run in parallel; the task moves region by region.
  B. The destination array requires two free FC ports for Peer Motion: one port in peer mode to connect to the source array and one to connect to the host that owns the VLUNs that will be migrated.
  C. Volumes in a 3PAR domain on the source array will be placed in the same domain on the destination array
  D. Peer Motion acts as a host-based volume-mirroring solution and requires a license installed on the source and on the destination array.
  B. The destination array requires two free FC ports for Peer Motion: one port in peer mode to connect to the source array and one to connect to the host that owns the VLUNs that will be migrated.

• Question 48:

  What must you be aware of when installing HP 3PAR StoreServ 10800 nodes?

  A. You should install nodes 4, 5, 6, and 7 inverted
  B. You should configure the adapters the same for all nodes in the system.
  C. You should cable odd ports on odd nodes to the same fabric as even ports on even nodes
  D. You should remove all adapter modules to reduce weight during installation.
  B. You should configure the adapters the same for all nodes in the system.

• Question 49:

  What is true about the node interconnection link cables on the HP 3PAR StoreServ 7400?

  A. They are color coded
  B. Their length is a maximum of 2 meters,
  C. They are directional
  D. Their ends are labeled with an Aand C
  C. They are directional
  D. Their ends are labeled with an Aand C

• Question 50:

  Which situation prevents you from using SmartStart to install an HP 3PAR StoreServ 7000 system at a customer site?

  A. DHCP is not running in the customer environment
  B. The customer will not allow remote access of the Service Processor
  C. The controller nodes and the service processor are connected to the same network.
  D. All the customer servers are running Windows 2008 R2.
  D. All the customer servers are running Windows 2008 R2.