HP HP0-Y46 Online Practice Questions and Exam Preparation

HP HP0-Y46 Online Questions & Answers

• Question 41:

  What are the default logging properties for an HP Comware switch? (Select two.)

  A. Displays debugging output to the console
  B. Displays log messages to the console
  C. Uses the Information Center to control logging functions
  D. Uses the Event Log to save log messages
  E. Supports five logging levels
  B. Displays log messages to the console
  C. Uses the Information Center to control logging functions

• Question 42:

  A network administrator is examining the routing table on an HP Comware switch. The network administrator sees two routes. 10.1.1 0/24, with the same neighbor's address (10.1.1.1). What would create this result?

  A. There is an aggregated link with two connections between the two routers.
  B. The bandwidth of the two routes is the same.
  C. The administrative distance of the two routes is the same.
  D. The cost of the two routes is the same.
  D. The cost of the two routes is the same.

• Question 43:

  Refer to the link aggregation between two HP switches.

  

  The link aggregation is failing between the HP Provision and HP Comware switches. Which solution solves this problem?

  A. The Provision switch must be reconfigured for static LACP.
  B. The Provision switch must be reconfigured for dynamic link aggregation.
  C. The Comware switch must be reconfigured for dynamic LACP active mode.
  D. The Comware switch must be reconfigured for static LACP.
  C. The Comware switch must be reconfigured for dynamic LACP active mode.

• Question 44:

  What is the function of HP Intelligent Provisioning?

  A. Secures access control at the edge of a network so that guest users are isolated
  B. Uses application templates to configure virtual networks, servers, and storage using industry best practices
  C. Enables quick and secure implementation of a wireless network
  D. Deploys, configures, and maintains HP ProLiant Gen8 servers
  D. Deploys, configures, and maintains HP ProLiant Gen8 servers

• Question 45:

  Refer to the network and ARP table exhibit.

  

  The user on the left side of the exhibit wants to build a connection to the server on the right. Assume that SwitchA and SwitchB are HP Comware switches. For which IP address does the user generate an ARP?

  A. The user generates an ARP for the MAC address that corresponds to 10.1.11.1.
  B. The user generates an ARP for the MAC address that corresponds to 10.1.12.1.
  C. The user generates an ARP for the MAC address that corresponds to 10.1.11.11.
  D. The user generates an ARP for the MAC address that corresponds to 10.1.12.2.
  C. The user generates an ARP for the MAC address that corresponds to 10.1.11.11.

• Question 46:

  Refer to the network and ARP table exhibit.

  

  The user on the left side of the exhibit wants to build a connection to the server on the right Assume that SwitchA and SwitchB are HP Comware switches. For which IP address does the user generate an ARP?

  A. The user generates an ARP for the MAC address that corresponds to 10.1.11.1.
  B. The user generates an ARP for the MAC address that corresponds to 10.1.12.1.
  C. The user generates an ARP for the MAC address that corresponds to 10.1.12.2.
  D. The user generates an ARP for the MAC address that corresponds to 10.1.1111.
  D. The user generates an ARP for the MAC address that corresponds to 10.1.1111.

• Question 47:

  A network administrator is setting up OSPF between an HP Provision and HP Comware switch. Once the configuration is finished, the network administrator sees log messages in the Comware session about the successful establishment of the adjacency. However, the network administrator does not see similar messages on the Provision console.

  How can the network administrator see these log messages about the new OSPF adjacencies on the Provision console?

  A. Use the show event-log command.
  B. Use the terminal logging command.
  C. Use the terminal monitor command.
  D. Use the show logging command.
  B. Use the terminal logging command.

• Question 48:

  A network administrator is connected to the console of an HP Comware switch when these messages display:

  

  Based on this information, what has just occurred?

  A. A 10 GbE line card was inserted into the slot of the Comware switch.
  B. Another member has joined the IRF topology.
  C. The main processor card on a 7500 switch has become active.
  D. The second processor card on a 5820 switch has become active.
  A. A 10 GbE line card was inserted into the slot of the Comware switch.

• Question 49:

  Refer to the network exhibit.

  

  A network administrator needs to configure link aggregation using static LACP on Switch-A. Which is an HP Comware switch. Which configuration accomplishes this goal?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  C. Option C

• Question 50:

  A network administrator configures the following information on an HP Provision switch:

  Provision(config)# spanning tree

  Provision(config)# spanning tree instance 0 priority 2 Based on this information, what is the priority assigned to this switch for instance 0?

  A. 9
  B. 2
  C. 4.096
  D. 8.192
  E. 16.384
  B. 2