Huawei H35-210 Online Practice Questions and Exam Preparation

Huawei H35-210 Online Questions & Answers

• Question 281:

  (single) What is the role of the integrated access device UA5000 in the NGN network?

  A. TG
  B. MG
  C. MGC
  D. UG
  B. MG

• Question 282:

  (single) Is the following description correct? The MA5616 only supports DC power.

  A. True
  B. False
  B. False

• Question 283:

  In a GPON network, which of the following may cause the ONT to fail to be discovered? (Select All that Apply)

  A. The optical power received by the ONT is less than the sensitivity threshold.
  B. The ONT auto-find function of the GPON port is disabled.
  C. The upstream port of the OLT is down.
  D. The optical power received by the ONT is greater than the overload optical power.
  A. The optical power received by the ONT is less than the sensitivity threshold.
  B. The ONT auto-find function of the GPON port is disabled.
  D. The optical power received by the ONT is greater than the overload optical power.

• Question 284:

  Generally, you are advised to configure NMS VLANs as follows:

  vlan 350 smart vlan desc 350 description "Manage" port vlan 350 0/8 0

  A. TRUE
  B. FALSE
  B. FALSE

• Question 285:

  (single) Regarding EPON, which of the following descriptions is incorrect?

  A. The EPON standard is one of the many TDM-PON standards. It has the basic characteristics of the TDM-PON network: the tree topology network consists of three parts: the OLT, the ONU, and the ODN (Optical Distribution Network).
  B. On the logical topology, the EPON protocol establishes a logical link for the OLT to each ONU. The leading byte of the Ethernet data frame carries the logical link identifier, that is, LLID (Logical Link Identity).
  C. The downstream data stream from the OLT to the ONU is encapsulated into an Ethernet message, and the corresponding LLID is appended and transmitted in the tree PON network. The optical splitter in the ODN broadcasts the data stream to each branch, and all ONUs can receive the downlink Ethernet data frame and selectively receive its own data according to the LLID.
  D. From the ONU to the OLT in the uplink direction, each ONU uses the broadcast mode to share the uplink bandwidth.
  D. From the ONU to the OLT in the uplink direction, each ONU uses the broadcast mode to share the uplink bandwidth.

• Question 286:

  (multiple) What remote acceptance functions can the MA5600T/MA5680T provide?

  A. PPPOE simulation test
  B. DHCP simulation test
  C. Voice call simulation test
  D. BTV simulation test
  A. PPPOE simulation test
  B. DHCP simulation test
  C. Voice call simulation test
  D. BTV simulation test

• Question 287:

  Which of the following statements about XGS-PON data transmission are incorrect? (Select All that Apply)

  A. Each service/user must use different GEM port channels.
  B. GEM ports in a T-CONT cannot exceed twice the number of users.
  C. All services can be carried by the same T-CONT.
  D. Data in the same GEM port can be received by only one ONU.
  B. GEM ports in a T-CONT cannot exceed twice the number of users.

• Question 288:

  (single) Is the following description correct? The key parameters of the ODN network are attenuation, insertion loss, and return loss.

  A. True
  B. False
  A. True

• Question 289:

  (single) Is the following description correct? The cells transmitted in the ATM network have two priority levels, which are distinguished by the CLP bits in the cell header. CLP=1 indicates that the priority is high, and CLP=0 indicates that the priority is low.

  A. True
  B. False
  B. False

• Question 290:

  (single) Regarding the ADSL rate limit in the UA5000, which of the following statements is incorrect?

  A. ADSL rate limiting can use port rate limiting or PVC rate limiting.
  B. Set the UPC switch of the PVC to ON when the port speed limit is adopted.
  C. Set the PVC UPC switch to ON when the PVC speed limit is used.
  D. Port rate limiting is the traffic limiting by setting the maximum uplink and downlink rate when configuring the line profile.
  B. Set the UPC switch of the PVC to ON when the port speed limit is adopted.