Huawei H35-210 Online Practice Questions and Exam Preparation

Huawei H35-210 Online Questions & Answers

• Question 301:

  (single) Which of the following does not belong to the communication network category?

  A. Telephone network
  B. Internet network
  C. Radio and television network
  D. State Grid
  D. State Grid

• Question 302:

  (multiple) QC engineers launch the SmartKit NSE2700 Quality Inspector tool to support which of the following ways to connect devices?

  A. Telnet mode
  B. SSH mode
  C. Multi-hop mode
  D. Serial port mode
  A. Telnet mode
  B. SSH mode
  C. Multi-hop mode
  D. Serial port mode

• Question 303:

  (single) Which command is required to configure the chassis connection in the UA5000 chassis of the high-density PVM master?

  A. frame connect
  B. frame link
  C. link add
  D. frame add
  A. frame connect

• Question 304:

  (multiple) Which control frame messages are defined by MPCP?

  A. GATE
  B. REPORT
  C. REGISTER
  D. REGISTER ACK
  A. GATE
  B. REPORT
  C. REGISTER
  D. REGISTER ACK

• Question 305:

  (single) Is the following description correct? In the classification of acceptance test items, the basic package is used to ensure the normal operation of equipment and network basic services and functions, and it is only necessary to use simple or cheap instruments to meet the acceptance test items.

  A. True
  B. False
  A. True

• Question 306:

  G fast retransmission enables G.fast lines to work stably at high frequencies.

  A. TRUE
  B. FALSE
  A. TRUE

• Question 307:

  A school uses the POL networking and has only one campus. During VLAN design, VLANs are divided by service type and services are identified by a single VLAN tag. In this case, which VLAN attribute should be used?

  A. Common
  B. QinQ
  C. Sub
  D. Stacking
  A. Common

• Question 308:

  (multiple) In the GPON network, which of the following reasons may cause the ONU to fail to go online?

  A. The optical power received by the ONU is greater than the overload optical power.
  B. The optical power received by the ONU is less than the sensitivity value.
  C. There is abnormal attenuation on the ODN line.
  D. The ODN line is too long and exceeds the upper line distance set by the system.
  A. The optical power received by the ONU is greater than the overload optical power.
  B. The optical power received by the ONU is less than the sensitivity value.
  C. There is abnormal attenuation on the ODN line.
  D. The ODN line is too long and exceeds the upper line distance set by the system.

• Question 309:

  (single) Regarding the MA5600T/MA5680T Ethernet link aggregation, which of the following statements is wrong?

  A. Cross-board aggregation is not supported
  B. Supports a maximum of 512 aggregation groups, and each aggregation group includes a maximum of 8 physical ports.
  C. Support link aggregation in load sharing mode and non-load sharing mode (active/standby mode).
  D. Supports manual configuration and static LACP link aggregation. Dynamic LACP link aggregation is not supported.
  A. Cross-board aggregation is not supported

• Question 310:

  (multiple) What are the operations that need to be performed when adding an ONT to the MA5680T?

  A. Configure the DBA template
  B. Configure the ONT line template
  C. Configure the ONT service template.
  D. Add ONT and bind related templates
  A. Configure the DBA template
  B. Configure the ONT line template
  C. Configure the ONT service template.
  D. Add ONT and bind related templates