Huawei H35-210 Online Practice Questions and Exam Preparation

Huawei H35-210 Online Questions & Answers

• Question 271:

  (single) What are the fiber types connected to the MA5680T GPBD port?

  A. LC/PC
  B. FC/PC
  C. SC/PC
  D. LC/APC
  C. SC/PC

• Question 272:

  (single) Is the following description correct? In EPON, when the length of the fiber under the PON port is 10KM, the split ratio is 1:32. When the length of the fiber is 20KM, the split ratio is 1:16.

  A. True
  B. False
  A. True

• Question 273:

  (single) When configuring the traffic table on the MA5680T, if only the CIR is configured and the PIR parameter is not specified, what is the PIR value by default?

  A. PIR=CIR
  B. PIR=min(1.5*cir,10240000)
  C. PIR=min(2*cir,10240000)
  D. No relationship
  C. PIR=min(2*cir,10240000)

• Question 274:

  Based on the board high availability principle, the MA5800 can use the service board of the MA5608T.

  A. TRUE
  B. FALSE
  B. FALSE

• Question 275:

  In the downstream direction of the GPON, all ONUs receive the same data because the broadcast mode is adopted. In the upstream direction, because the same optical splitter is used, the data of a branch fiber can also be received by another branch fiber.

  A. TRUE
  B. FALSE
  B. FALSE

• Question 276:

  The GPON technology is integrated with the ( ) to provide terminal devices that meet various application scenarios.

  A. xDSL
  B. Ethernet
  C. WLAN
  D. VoIP technology
  D. VoIP technology

• Question 277:

  (single) Is the following description correct? In the routing table entry, only the next hop and the outbound interface (Nexthop/Interface) can be used for the same destination address and mask (Destination/Mask).

  A. True
  B. False
  B. False

• Question 278:

  (single) Which of the following scenarios can the HG8245 product use?

  A. Outdoor type
  B. Family user type
  C. SBU commercial user type
  D. MINI-DSLAM
  B. Family user type

• Question 279:

  Factors causing the ODN link loss include: (Select All that Apply)

  A. Fiber transmission loss
  B. Optical splitter loss
  C. Extra line loss, about 3 dB in general
  D. Splicing and cord end loss
  E. Connectors and flange loss
  A. Fiber transmission loss
  B. Optical splitter loss
  D. Splicing and cord end loss
  E. Connectors and flange loss

• Question 280:

  (single) What is the difference between alarm masking and alarm suppression?

  A. When the alarm masking function is configured, the NE still reports the alarm, but the network management system does not receive the alarm. When the alarm suppression is set, the NE does not report the alarm.
  B. When the alarm masking function is set, the NE does not report the alarm. When the alarm suppression is set, the NE still reports the alarm, but the network management system does not receive the alarm.
  C. When the alarm mask function is set, the network element does any processing.
  D. There is no difference
  A. When the alarm masking function is configured, the NE still reports the alarm, but the network management system does not receive the alarm. When the alarm suppression is set, the NE does not report the alarm.