Extreme Networks EW0-300 Online Practice Questions and Exam Preparation

Extreme Networks EW0-300 Online Questions & Answers

• Question 101:

  What is true of a Rendezvous Point in PIM-DM?

  A. It is the meeting point for PIM sources and receivers.
  B. It is the meeting point for PIM sources and the bootstrap router.
  C. In PIM-DM you don't need a Rendezvous point.
  D. It is the distribution point for multicast streams from the Mbone into an AS.
  C. In PIM-DM you don't need a Rendezvous point.

• Question 102:

  When a PIM-SM router wants to receive a Multicast stream, it

  A. Sends a join in the direction of the RP.
  B. Sends a Join in the direction of the BSR
  C. Sends a Join in the direction of the group-address, using the RPF-check
  D. Sends out a Join on all its multicast enabled interfaces
  A. Sends a join in the direction of the RP.

• Question 103:

  An Ethernet Automatic Protection Switching (EAPS) domain relies on a control VLAN. The ports in that control VLAN ports must be tagged, and participating in the ring only.

  A. True
  B. False
  A. True

• Question 104:

  An Extreme switch connected to a network of Extreme Switches running ESRP is called an ESRP-aware switch due mainly because

  A. These switches are connected together using load sharing
  B. They are all running the same routing protocol
  C. Each switch has Extreme Discovery Protocol (EDP) enabled
  D. All of the above
  C. Each switch has Extreme Discovery Protocol (EDP) enabled

• Question 105:

  On a RADIUS server you can distinguish between switch access and Netlogin authentication. Extreme provides a vendor specific attribute ExtremeExtreme-Netlogin-only =disabled/nabled.

  User authentication for both Netlogin and switch access is allowed when the value is disabled.

  When the value enabled user authentication is restricted to Netlogin only.

  A. True
  B. False
  A. True

• Question 106:

  A QoS policy is the result when you assign a traffic grouping to a QoS profile when configuring QoS on a Summit1i switch.

  A. True
  B. False
  A. True

• Question 107:

  An OSPF router connected to a RIP network and performing route redistribution is considered

  A. to be an ASBR
  B. to be an ABR
  C. to be a DR
  D. to be a BDR
  A. to be an ASBR

• Question 108:

  What are the steps for DVRMP to begin routing multicast packets?

  A. Discover neighbor routers => Elect designated browser => exchange route reports
  B. Elect designated router => Discover neighbor routers => Exchange route reports
  C. Discover neighbor routers => Exchange route report => Elect designated forwarder
  D. None of the above
  C. Discover neighbor routers => Exchange route report => Elect designated forwarder

• Question 109:

  A priority setting of 255 in VRRP makes the switch ineligible to become the master switch.

  A. True
  B. False
  B. False

• Question 110:

  All Extreme switch products support the standard 802.1p priority bits that are part of a tagged Ethernet frame.

  A. True
  B. False
  A. True