IBM C4040-129 Online Practice Questions and Exam Preparation

IBM C4040-129 Online Questions & Answers

• Question 141:

  Which object has the Routing Entry Compare Data that is used by the subsystem to route a job?

  A. Class
  B. Job Description
  C. Routing Directory
  D. Workstation Entries
  B. Job Description

• Question 142:

  An administrator is upgrading 5 partitions on a single system to a new IBM i release.

  The IBM i partitions share a tape library configured with one drive per partition. There is one DVD drive on the system shared by the all the partitions.

  The maintenance window is long enough to upgrade at most one partition using DVD media. Which approach allows the administrator to complete all the upgrades within the maintenance window?

  A. Build an image catalog with the distribution media, and copy to all partitions.Install each partition from its image catalog image.
  B. Build an image catalog on a Linux PC, and share it with NES to all partitions.Concurrently update all the partitions using network install to the virtualized image catalog.
  C. Build an image catalog with the distribution media on one partition.Save the directory with the DVD images to tapes so there is one tape for each partition. Use an alternate IPL device to install from the tapes.
  D. Concurrently IPL all partitions in "D" mode to the DVD drive in shared mode.When all the partitions complete using one DVD and prompt for the next one, insert the next DVD in the drive and respond to the prompts.
  A. Build an image catalog with the distribution media, and copy to all partitions.Install each partition from its image catalog image.

• Question 143:

  The user ABC, class *USER, and belongs to the APPLICATION group. The user is running the Edit Object Authority (EDTOBJAUT) command against the FILE1 physical file, but the command fails with the message "Not authorized to change

  authorities".

  The APPLICATION group has *CHANGE authority to the physical file FILE1. User ABC has no other authorities to the FILE1 and can display the file data without any problem.

  Adding which authority for the APPLICATION group will allow user ABC to run the EDTOBJAUT command against the PILE 1 physical file?

  A. *OBJMGT
  B. *OBJUPD
  C. *OBJCHG
  D. *SECADM
  A. *OBJMGT

• Question 144:

  According to IBM recommendations, which parameter setting should be applied when a new GROUP profile is created?

  A. Password parameter set to *NONE
  B. Group ID number parameter set to U
  C. User Class parameter set to *GROUP
  D. Initial Program to call parameter set to *NONE
  A. Password parameter set to *NONE

• Question 145:

  An administrator needs to access the HMC remotely from a browser on a desktop. When user ID "hscroot" is used, the authentication is successful. However, when user ID "admin" is used, the authentication fails, even though the ID has hmc super user as the Task Role. The user "admin" can sign on locally at the HMC.

  What is the likely cause of the problem?

  A. The web access password for "admin" is expired.
  B. Only user "hscroot" has authority to the ETH1 device.
  C. The user "admin" is not a member of the "webadmin" group.
  D. Allow Remote Access via the Web has not been checked for the user id "admin."
  D. Allow Remote Access via the Web has not been checked for the user id "admin."

• Question 146:

  A file named XYZ is secured as follows in the graphic below. What authorities will AUSER have to file XYZ?

  

  A. *ALL
  B. *CHANGE
  C. *USE + Object Management
  D. * CH
  D. * CH

• Question 147:

  In the Work With Shared Pools panel shown, what is the meaning of the "Maximum" column under the "Size" section?

  

  A. The maximum amount of main storage that can be assigned to the pool in GB.
  B. The maximum percentage of the total main storage that can be assigned to the pool.
  C. The maximum amount of main storage that the automatic tuner will assign to the pool in GB.
  D. The maximum percentage of the total main storage that the automatic tuner will assign to the pool
  D. The maximum percentage of the total main storage that the automatic tuner will assign to the pool

• Question 148:

  A POWER7 customer using disk adapters with RAID-5 and hot spare has noticed sudden and significant performance problems with an LPAR. WRKDSKSTS followed by Fl 1 shows the disk units as "DEGRADED". The customer has

  attempted to check the RAID card battery in Service Tools but it is not listed.

  What is the cause of the degraded status?

  A. One of the power supplies in the disk drawer has failed.
  B. The cache battery is in the 90-day replacement warning state.
  C. The pairing of the RAID cards is broken, so the RAID cache is not in use.
  D. The hot spare has taken over for a failed drive and is awaiting replacement.
  C. The pairing of the RAID cards is broken, so the RAID cache is not in use.

• Question 149:

  Which command will save the access paths for Iwo physical files (PFLE1, PFILE2) when both the physical and dependent logical file (LFILE) reside in the same library?

  A. SAV OBJ(LFILE) PATH(*YES)
  B. SAVOBJ OBJ(LFILE) ACCPTH(*YES)
  C. SAVOBJ OBJ(PFILE1 PFILE2) ACCPTH(*YES)
  D. SAVACCPATH FILE(PFILE1 PFILE2) ACCPATH(*YES)
  C. SAVOBJ OBJ(PFILE1 PFILE2) ACCPTH(*YES)

• Question 150:

  On a system with a single ASP, an I/O intensive batch job that normally completes in 30 minutes is still running after 2 hours. CPU utilization on the system is less than 10% and memory is not constrained. The WRKDSKSTS command shows the following: What should be administrator do to improve performance?

  

  A. Run Start Disk Reorganization (STRDSKRGZ)
  B. Run ASP Balancing with a Balance Type of *MOVDTA
  C. RUN Reclaim Storage with a Select Type of * RSMLAC
  D. Run ASP Balancing with a Balance Type of *CAPACITY
  D. Run ASP Balancing with a Balance Type of *CAPACITY