IBM C4040-129 Online Practice Questions and Exam Preparation

IBM C4040-129 Online Questions & Answers

• Question 151:

  When a subsystem is created using the CRTSBSD command, what is the purpose of the ASP Group (ASPGRP) parameter?

  A. Specifies the name of an Auxiliary Storage Pool (ASP) group that contains the library for the secondary language
  B. Specifies the initial setting for the Auxiliary Storage Pool (ASP) group name for the jobs running in this subsystem description
  C. Specifies the name of an Auxiliary Storage Pool (ASP) group to be included in the library name space of the subsystem monitor job
  D. Specifies the names of the Auxiliary Storage Pool (ASP) groups that may be added to the jobs running in this subsystem description using the SETASPGRP command
  C. Specifies the name of an Auxiliary Storage Pool (ASP) group to be included in the library name space of the subsystem monitor job

• Question 152:

  The threshold limit has been reached for the system ASP on a system running IBM i 7.1 . There are some disk units configured to a user ASP available. Business continuing policy prevents the administrator from stopping the system. How could the system administrator correct the storage problem in the system ASP?

  A. Increase the ASP threshold above the currently utilized storage.
  B. Concurrently remove available disk units from user ASP using the "Remove units from configuration" SST option and add them to system ASP.
  C. Switch to the backup system using an HA solution and restart the original system to DST. Remove the available disk units from user ASP and add them to system ASP.
  D. Initiate a control panel function 21 to activate DST on the system console for the affected partition. Use the DST feature to compress the parity stripe to increase available storage.
  B. Concurrently remove available disk units from user ASP using the "Remove units from configuration" SST option and add them to system ASP.

• Question 153:

  Where in IBM i Navigator can suggestions for improved database performance generated by the system be viewed and implemented?

  A. Index Advisor
  B. Health Center
  C. Database Navigator
  D. SQL Plan Cache Event Monitors
  A. Index Advisor

• Question 154:

  IBM support asks that currently active system firmware level (MHxxxxx) be deactivated, so the system can run on the older level. How is this accomplished?

  A. Run command DLTPTF PTE (M) RMV (*TEMP).
  B. Run the WRKFMWSTS command. Select option 4 on the *TEMP line and press "enter".
  C. On the system panel, change the IPL mode to "B" and "P. Then restart the system.
  D. Run command RMVPTF LICPGM(5770SS1)SELECT(MHxxxxx) DELAYED(*YES),then restart the partition.
  C. On the system panel, change the IPL mode to "B" and "P. Then restart the system.

• Question 155:

  An administrator is using *BASIC assistance level. A new user profile is created using option 1 - Add, from the Work with User Enrollment screen. Additional special authorities need to be assigned to the profile. When creating the profile, the administrator does not see available parameters to complete this task. What must the administrator do to add the special authorities?

  A. When editing the profile, press F9 to reveal additional configuration options.
  B. Use the WRKUSRPRF command and select option 9-Work with Authority on the profile.
  C. Finish creating the profile then, using the CHGUSRPRF command, press EIO to see additional parameters.
  D. Save the user profile, then use option 2 to change the profile from the Work with User Enrollment screen.
  C. Finish creating the profile then, using the CHGUSRPRF command, press EIO to see additional parameters.

• Question 156:

  Using a disaster recovery facility, an administrator has just completed the successful recovery test of a production IBM i 7.1 LPAR with only *SYSBAS. Before leaving the facility, the administrator needs to prepare the partition for the next recovery test.

  Which action will support this requirement?

  A. On the recovery partition command line: PWRDWNSYS OPTION(*IMMED) RESTART(*INZ) ENDSBSOPT (*NOJOBLOG)
  B. On the recovery LPAR: start dedicated service tools (STRDST). On the main menu select the option to work with disk data, then select the option to initialize the system.
  C. On the recovery LPAR: initiate a "D Manual" IPL with the IBM i 7.1 I_Base DVD loaded. When prompted, select the option to "Install Licensed Internal Code and Initialize System".
  D. Press and hold the power button on the front of the CEC. After approximately 10 seconds, from the menu displayed on the console, select the option to "Install Licensed Internal Code and Initialize System".
  C. On the recovery LPAR: initiate a "D Manual" IPL with the IBM i 7.1 I_Base DVD loaded. When prompted, select the option to "Install Licensed Internal Code and Initialize System".

• Question 157:

  An administrator needs to upgrade their Flexible Service Processor's (FSP) firmware for an HMC managed Power 720. They are currently running AL730_085. The latest corrective service on Fix Central is AL730_1 12_092. Which statement is correct regarding the installation of this corrective service package?

  A. Since this is an HMC managed FSP, the installation of the corrective service will be concurrent.
  B. Since the FSP will remain at the same 730 code stream level the installation of the corrective service will be concurrent.
  C. Since the 092 is greater than the currently running 085 fix pack level, the installation of the corrective service will be disruptive.
  D. Since the 112 is greater than the currently running 085 fix pack level, the installation of the corrective service will be disruptive.
  C. Since the 092 is greater than the currently running 085 fix pack level, the installation of the corrective service will be disruptive.

• Question 158:

  On an HMC-managed system with several partitions, the QSECOFR password for DST/SST has been disabled for one partition. No other profiles for DST/SST are known. What procedure will reset the password to the shipped value?

  A. Sign on to the partition as QSECOFR, issue the CHGDSTPWD PASSWORD(*DEFAULT) command.
  B. Use the function in the HMC for "Users and Groups" to modify the partition's DST password.
  C. Use the control panel function 21 from the HMC user interface to reset the SST/DST password.
  D. Connect to ASMI, use the "admin" profile to reset the DST password of the affected partition.
  A. Sign on to the partition as QSECOFR, issue the CHGDSTPWD PASSWORD(*DEFAULT) command.

• Question 159:

  What are the key benefits provided by database journaling?

  A. Can send updates concurrently to a second system Can back out incomplete transactionsCan reduce system I/O workload
  B. Can reduce application complexityCan back out incomplete transactionsCan maintain database integrity in the case of an unexpected outage
  C. Can send updates concurrently to a second system Can increase performanceCan maintain database integrity in the case of an unexpected outage
  D. Can send updates concurrently to a second system Can back out incomplete transactions and commitment controlCan maintain database integrity in the case of an unexpected outage
  D. Can send updates concurrently to a second system Can back out incomplete transactions and commitment controlCan maintain database integrity in the case of an unexpected outage

• Question 160:

  All IBM-supplied user profiles and administrators' profiles in a system have inadvertently been disabled and an administrator needs to regain access into the system. What should the administrator do?

  A. Sign on to the system console as user QSECOFR.
  B. Reinstall the system License Internal Code to reset the QSECOFR profile.
  C. Use Function 21 on the control panel 7 times to reset the QSECOFR profile.
  D. Sign on with any user that has *JOBCTL authority and CALL QIBMSECRST (`QSECOFR' *DEFAULT1).
  A. Sign on to the system console as user QSECOFR.