IBM C4040-129 Online Practice Questions and Exam Preparation

IBM C4040-129 Online Questions & Answers

• Question 131:

  A customer has an IBM i server that hosts web services and uploads files to other Internet-based servers.

  An administrator needs to add IP addresses to host additional web services, which must pass through the firewall. The firewall has a rule restricting traffic to specific IP and MAC addresses.

  What is the most appropriate method for the administrator to use?

  A. Create virtual IP addresses for each of the additional services.
  B. Create traditional IP addresses for each of the additional services.
  C. Purchase additional Ethernet cards.Create Ethernet lines for those cards.Configure the IP addresses on those lines.
  D. Create a virtual LAN (VLAN) and place the new IP addresses on that VLAN.Enable IP forwarding in CHGTCPA.Add a route in the firewall to the new addresses.
  A. Create virtual IP addresses for each of the additional services.

• Question 132:

  A change to POWER7 server firmware is being planned on an HMC managed system. The current server firmware level is AL720_108_066, and the new server firmware level will be AL730_078_035. What must the administrator take into consideration for this task?

  A. A backup of critical FSP data needs to be scheduled.
  B. Downtime needs to be scheduled as this will be a disruptive update.
  C. The system ESP should have both network ports configured to the HMC to guard against HMC connection loss.
  D. Ensure the "Apply Immediate" option is selected on the Submit Task panel so the update will be concurrent.
  B. Downtime needs to be scheduled as this will be a disruptive update.

• Question 133:

  Which journaling capability was added in IBM i 7.1?

  A. End journaling can be done while a journaled file is in use.
  B. Journals larger than 1TB can have remote journals attached to them while in use.
  C. Remote journals are automatically compared and verified during suspend and resume operations.
  D. When starting journaling of the physical file, all logical files will automatically have their access paths set for SQL optimization.
  A. End journaling can be done while a journaled file is in use.

• Question 134:

  A new IBM i system is being set up as an FTP host for downloads. The administrator sees that the devices connect properly, but the directory commands fail and IFS files cannot be downloaded. What can the administrator do to correct the problem?

  A. Change the FTP server's initial name format to *PATH.
  B. Change the file extension so that it is properly translated.
  C. Grant *PEAD authority for the files to the QTFTP user profile.
  D. Change the CCSID of the files from 65535 to the correct number for the region.
  A. Change the FTP server's initial name format to *PATH.

• Question 135:

  An administrator created and tested a CL program to perform a nightly backup of an in-house application. The program adopts authority of the owner who is a user with *SAVSYS special authority.

  The administrator can run the program without error. However, when any member of the OPERATOR group attempts to use the program, an error occurs.

  Which action will correct the problem and maintain system security with least effort?

  A. Grant the operators *ALLOBJ authority.
  B. Change the authority on the library and program to PUBLIC *ALL.
  C. Grant the operator group profile *USE authority to the program.
  D. Use the Grant User Authority command (GRTUSRAUT) and specify the OPERATOR group as the referenced user.
  C. Grant the operator group profile *USE authority to the program.

• Question 136:

  An administrator needs to set up and configure a monitor for disk usage under Management Central. Monitors, Based on the image shown, which option is used to set up this monitor?

  A. Job
  B. File
  C. System
  D. Message
  C. System

• Question 137:

  Due to an application problem, management has requested the IPL of a partition running IBM i 7.1. The administrator initiates the IPL, and during the restart phase notices the IPL is running in manual mode even though the HMC partition settings indicate B NORMAL.

  Why is the IPL running in manual mode?

  A. The PWRDWNSYS command restart parameter is set to *MANUAL.
  B. Manual is the default IPL mode when there is a console problem.
  C. The QIPLTYPE system value is set to "Attended IPL, Console in debug mode".
  D. Manual is the default IPL mode when the previous system end indicator is abnormal.
  C. The QIPLTYPE system value is set to "Attended IPL, Console in debug mode".

• Question 138:

  A new sales user attempts to sign on to the system. The user is immediately signed oft. The users job log contains the message CPE981 0: Library SALESLIB not found.

  All sales applications are located in the ASP named SALES.

  Which parameter should the administrator set in the user profile to correct this error?

  A. JOBD
  B. GRPPRE
  C. INLIBL
  D. INLASPGRP
  A. JOBD

• Question 139:

  A "previous release to current release" system migration is being performed. An application on the source system manages image files stored in the IFS, viewed using PCs.

  The Go Save menu, option 21 (full system save), was used to create the backup tape used in the migration process.

  After the data is migrated and the new system set up, none of the images are available.

  Which situation on the source system IFS directory, at the time of the backup, is the most likely cause of the problem?

  A. The "Hidden file" attribute was set to "Yes"
  B. The "Can be saved" attribute was set to "No".
  C. The "Need to archive (PC)" attribute was set to "Yes".
  D. The "Need to archive (System)" attribute was set to "No".
  B. The "Can be saved" attribute was set to "No".

• Question 140:

  A disaster recovery test is being performed, using backups from a production system. The backup process is as follows:

  Full system save, using GO SAVE Option 21, for weekly backup SAVCHGOBJ LIB(*ALL) is used for daily library backup, in addition to DLO and IFS saves The disaster recovery test is at the point where libraries are ready to be restored

  Which pair of actions will restore the libraries to the most recent save point, in the minimum amount of time?

  A. Use RSTLIB(*NONSYS) to restore all libraries and object from the SAVE 21 weekly save. For each daily tape, run a RSTLIB for each library saved by SAVCHGOBJ.
  B. Use RSTLIB(*NONSYS) to restore all libraries and object from the SAVE 21 weekly save. Then run a RSTOBJ for each library saved by SAVCHGOBJ on the most recent daily tape.
  C. Run RSTOBJ for each library saved by SAVCHGOBJ on the most recent daily tape.Then run RSTLIB (*NONSYS) OPTION(*NEW) to restore the remaining libraries and objects from the SAVE 21 weekly save.
  D. For each daily tape, run RSTOBJ for each library saved by SAVCHGOBJ on the daily tapes.Then run RSTOBJ(*NONSYS) OPTION(*NEW) to restore the remaining libraries and objects from the SAVE 21 weekly save.
  B. Use RSTLIB(*NONSYS) to restore all libraries and object from the SAVE 21 weekly save. Then run a RSTOBJ for each library saved by SAVCHGOBJ on the most recent daily tape.