Avaya 75940X Online Practice Questions and Exam Preparation

Avaya 75940X Online Questions & Answers

• Question 1:

  Which two statements about the HP Nimble storage systems used in ACP 4200 are true? (Choose two.)

  A. ACP 4200 may use the HP Nimble 33 Base unit with up to 2 Expansion units.
  B. ACP 4200 may use the HP Nimble 16 Base unit with up to 5 Expansion units.
  C. ACP 4200 may use the HP Nimble 16 Base unit with up to 2 Expansion units.
  D. ACP 4200 may use the HP Nimble 33 Base unit with up to 5 Expansion units.
  A. ACP 4200 may use the HP Nimble 33 Base unit with up to 2 Expansion units.
  B. ACP 4200 may use the HP Nimble 16 Base unit with up to 5 Expansion units.

• Question 2:

  Why does enabling VMware Enhanced vMotion Compatibility (EVC) prevent vMotion migrations from falling?

  A. Because of incompatible DRS rules across the cluster
  B. Because of incompatible HA rules across the cluster
  C. Because of insufficient memory across the cluster
  D. Because of incompatible CPUs across the cluster
  D. Because of incompatible CPUs across the cluster

• Question 3:

  An Avaya Orchestrator administrator has been tasked with getting a copy of the Temperature Values chart for a Server. When doing this in the past, the administrator has navigated to the Compute Group Dashlet-Host Up-Host IP Address-Performance Chart. However, the Temperatures Values chart cannot be found.

  What is potentially causing this issue?

  A. The SNMP credentials for the Server's thermostats subsystems are incorrect.
  B. The IP address chosen is of the ESXi host, not the iLO interface.
  C. The Host is currently unresponsive.
  D. The Temperatures Values are only available for VSP switches and Storage systems.
  C. The Host is currently unresponsive.

• Question 4:

  Which two circumstances would require the Avaya Orchestrator ACP Configuration Wizard to be run in the field? (Choose two.)

  A. When a new G450 Gateway is added to the ACP.
  B. When a new configuration file for the ACP's VSP Switches is deployed.
  C. When a new Virtual Machine is added to the ACP.
  D. When a new ESXi Host is added to the ACP.
  B. When a new configuration file for the ACP's VSP Switches is deployed.
  D. When a new ESXi Host is added to the ACP.

• Question 5:

  Refer to the exhibit.

  

  Why is the usage measurement of CPU2 (in Purple) shown in the chart highlighted in the table?

  A. Because the CPU2 has been nominated as the primary CPU in this Virtual Machine.
  B. Because the CPU2 has been highlighted with an active alarm.
  C. Because the CPU2 usage is closest to the average usage of all the CPUs.
  D. Because the CPU2 has been selected in the table under the chart.
  D. Because the CPU2 has been selected in the table under the chart.

• Question 6:

  Refer to the exhibit.

  

  Which Avaya Session Border Controller for Enterprise (ASBCE) configuration option is shown?

  A. High Availability
  B. Hybrid
  C. Geographic Redundancy
  D. Two-wire
  A. High Availability

• Question 7:

  Refer to the exhibit.

  

  An administrator is adding new equipment to the ACP 4200 in the Avaya Orchestrator Configuration Wizard.

  How do the Device Description and Serial Number fields get populated in the Avaya Orchestrator Configuration Wizard?

  A. These are optional fields that do not need to be populated.
  B. These are automatically detected by clicking on the Detect Hardware button.
  C. These are manually entered by the administrator.
  D. These are imported from the ACP Configurator Tool Excel spreadsheet.
  C. These are manually entered by the administrator.

• Question 8:

  Using VMware networking in ACP 4200, how are Virtual NICs mapped to physical NICs?

  A. Via DRS rules
  B. On a 1-to-1 basis
  C. Via Virtual Switches and Port Groups
  D. Via the VNIIC mapping tables
  D. Via the VNIIC mapping tables

• Question 9:

  When a Layer 2-only networking topology is deployed, what is the behavior of the ACP 4200?

  A. It will support only a single management VLAN.
  B. It will extend VLANs out to the Data Center routers which will provide Layer 3 routing.
  C. It will support only a single application VLAN.
  D. It will have 802.1Q tagging enabled on all ports of the VSP switches.
  B. It will extend VLANs out to the Data Center routers which will provide Layer 3 routing.

• Question 10:

  Refer to the exhibit.

  

  What does the IP address 10.1.1.1 represent?

  A. The IP address of the EMC storage
  B. The SMLT IP address of the two VSP 7200 switches
  C. The Virtual IST IP address of the two VSP 7200 switches
  D. The VRRP IP address of the two VSP 7200 switches
  D. The VRRP IP address of the two VSP 7200 switches