Avaya Avaya-Certification 7303 Questions & Answers

• Question 31:

  A customer makes a call from their mobile telephone to Ext A on a PBX. Ext A is call-forwarded to Ext B. There is nobody to answer the call at Ext B, so the call is transferred to the Avaya CallPilot voicemail system. How will Avaya CallPilot treat the message?

  A. the message will be storedin the mailbox for Ext A

  B. the message will be storedin the mailbox forExtB

  C. themessage will be stored in thegeneraldelivery mailbox

  D. the message will be transferredto the operator

  Correct Answer: A

• Question 32:

  The Avaya CallPilot 600r servers are standalone systems that interface with the Meridian 1 and Communication Server 1000 PBX switches for multimedia connectivity. Which hardware component is used to complete the physical connection from the MPB96E card in the server and the MGate card installed in the switch?

  A. CT Bus cable

  B. Serial modern

  C. CAT5Ethernet cable

  D. NTRH2014 triple DS30X cable

  Correct Answer: D

• Question 33:

  A technician has a SCSI tape device that was used with a 201i Avaya CallPilot server, and wants to use this tape device for tape backup with a 202i Avaya Call Pilot server. Which action is necessary to full connect the SCSI tape driver to the 202i?

  A. Attach theSCSI cable of the tape device to the SCSI attachment point on the face of theface of the 202ithenattach power to the tape device.

  B. Attach theUSBcable of the tape device to theUSB port on the facethe202i and thenattach power to the tape device.

  C. Attach theUSBto SCSI adaptor to connectthe tape device to the202i in the order to provide signaling andpower to the tape device.

  D. Attach theUSBto SCSI adaptor to connectthe tape device to theAvaya CallPilot server and then attachpower to the tape device.

  Correct Answer: D

• Question 34:

  An Avaya CallPilot has been ordered with 36 voice channels, eight fax channels and eight automatic speech recognition channels. How many virtual agents will need to be provisioned to support this system?

  A. 84 virtual agents

  B. 52 virtual agents

  C. 68 virtual agents

  D. 96 virtual agents

  Correct Answer: B

• Question 35:

  During installation of an Avaya CallPilot RIs. 5.0 system, a technician prepares to conned the 600r server to the ELAN Subnet. One end of the CAT5 cable connects to the server ELAN NIC connector at the rear panel of the server. Where is the other end of the cable connected?

  A. theELAN gateway

  B. the customer's network Gateway Router

  C. theELANEthernetswitch(Layer 2) orhub

  D. the clan switch (Layer2) orhub

  Correct Answer: C

• Question 36:

  A technician is preparing to install Avaya CallPilot RIs. 5.0 for a customer. They want to access the Avaya CallPilot system from the LAN and must provide some information for the installation. What information must the customer provide?

  A. DHCP server

  B. a Cat-5cable

  C. an Ethernet switch

  D. astatic IP address and subnetmask

  Correct Answer: D

• Question 37:

  A company has decided to install an Avaya CallPilot 1005 server at their new office locution to deliver multimedia messaging functionality to their employees. They will be using Fax and Desktop Messaging applications. A technician has been tasked with installing the new Avaya CallPilot server. Which operating system should be running on the Avaya CallPilot RIs. 5.0 server?

  A. RedHatLinux V4.0

  B. MicrosoftWindows Vista

  C. MicrosoftWindows Server2003

  D. Microsoft Windows NT

  Correct Answer: C

• Question 38:

  Prior to installing an Avaya CallPilot RIs. 5.0 system, you review the Configuration Wizard worksheet. The customer has provided CATS cable connections to their corporate LAN for the Switch Ethernet connection, the Avaya CallPilot server CLAN Ethernet connection, and the Avaya CallPilot server ELAN Ethernet connection. In the exhibit, the network address information for the Switch IP address, the Avaya CallPilot server ELAN IP address, and the Avaya CallPilot server CLAN IP address integrate with the customer's internal network.

  

  Which action should be taken?

  A. Proceed with the installation using the category 5 cable connections, IP addresses and Subnet masks provided by the customer.

  B. Inform the customer that IP addresses beginning with 192.168 are private addresses and if used the ELAN will not be able to be connected to the Internet.

  C. Proceed with the installation, but use a separate category 5 cable that connects directly fromthe switch to the ELANnetwork interface connector on the server.

  D. Inform the customer thattheELAN must beon a separate IP network isolatedfrom the CLAN, and recommendedtheyuse a Layer 2 Ethernet Switchor dedicated hub for theELAN, and differentIPaddressesfor the switch andthe ELANNIC.

  Correct Answer: D

• Question 39:

  A technician is preparing to set up, install, and configure an Avaya CallPilot RIs. 5.0 system. Which three guidelines should be followed whenever handling switch and server components? (Choose three.)

  A. Use electrostaticdischarge precautions.

  B. Hard drives needspecial handling.

  C. Use firm and steady force to seal printed circuit boards.

  D. Handle printed Circuit boards by the backplane edge connector.

  Correct Answer: ABC

• Question 40:

  When configuring the switch to support Avaya CallPilot services, which programming can be performed to provide for uninterrupted call processing in case the link or Avaya CallPilot is disabled?

  A. At the NCFW prompt, forward the primary Control DN (CDN) to the attendant.

  B. At the Night Call Forward (NCFW) prompt, forward the primary Control DN (CDN) to a secondary CDN.

  C. At theLocal DFDN prompt, direct all the Avaya CallPilot associated CDNs to a Default ACDDN, typicallyan attendant.

  D. At the Local Default Automatic Call Distribution directory number (DFDN) prompt, direct all CDNs to an appropriate phantom directory number depending on media type required.

  Correct Answer: C