Microsoft 70-741 Online Practice Questions and Exam Preparation

Microsoft 70-741 Online Questions & Answers

• Question 81:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.

  Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.

  You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that all of the Windows 10 computers can receive a DHCP lease.

  Solution: You activate the scope.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

• Question 82:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.

  The settings for VM1 are configured as shown in the exhibit below.

  

  You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You need to enable the Data Exchange integration service for VM1. Does this meet the goal?

  A. YES
  B. NO
  B. NO

• Question 83:

  You have two Hyper-V hosts named Server1 and Server2 that run windows server 2012 R2. The servers are nodes in a failover cluster named Cluster1.

  You perform a rolling upgrade of the cluster nodes to Windows Server 2016.

  You need to ensure that you can implement the Virtual Machine Load Balancing feature.

  Which cmdlet should you use?

  A. Update-ClusterFunctionalLevel
  B. SetCauClusterRole
  C. Update-ClusterNetWorkNameResource
  D. Set-ClusterGroupSet
  A. Update-ClusterFunctionalLevel

• Question 84:

  You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1. You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.

  You need to provide Internet connectivity for the client computers.

  What should you do?

  A. On Server2 run The New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 192.168.1.250.
  B. On Server2 run the New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 131.107.0.10.
  C. On Server1, stop the DHCP server. On the Internet network adapter on Server2, enable Internet Connection Sharing (ICS).
  D. Recreate the DHCP scope on Server1 to lease addresses from the 131.107.0.0/24 address space. On Server2, change the IP address of the internal network adapter to 131.107.0. 1. Configure Server 1 to provide the 003 Router option of 131.107.0. 1.
  C. On Server1, stop the DHCP server. On the Internet network adapter on Server2, enable Internet Connection Sharing (ICS).

• Question 85:

  Your network contains an Active Directory forest. The forest contains a domain named contoso.com.

  All of the DHCP servers and the DNS servers in the forest are managed by using an IP Address Management (IPAM) server named Cont_IPAM1.

  You acquire a new company that has an Active Directory forest. The forest contains a domain named fabrikam.com.

  You have six servers that are configured as shown in the following table.

  

  You need to ensure that all of the DHCP and DNS servers in both of the forests can be managed by using Cont-IPAM1. The solution must use the principle of least privileges. Which two actions should you perform? Each correct answer presents part of the solution.

  A. Upgrade Fabr_DNS1 to Windows Server 2016.
  B. Upgrade Fabr_DHCP1 to Windows Server 2016.
  C. Create an outgoing forest trust from contoso.com to fabrikam.com.
  D. Upgrade Cont_IPAM1 to Windows Server 2016.
  E. Create a two-way forest trust between contoso.com and fabrikam.com
  D. Upgrade Cont_IPAM1 to Windows Server 2016.
  E. Create a two-way forest trust between contoso.com and fabrikam.com

• Question 86:

  HOTSPOT

  You have two servers named Server1 and Server2 that run Windows Server 2016.

  Server1 has the DNS Server role installed. The advanced DNS properties for Server1 are shown in the Advanced DNS exhibit. (Click the Advanced DNS tab.)

  Server 2 is configured to use Server1 as a DNS server. Server2 has the following IP configuration.

  

  Advanced DNS

  

  DNS Manager

  

  For each of the following statements, select Yes if the statement is true. Otherwise, select No.

  NOTE: Each correct selection is worth one point.

  Hot Area:

  

  

• Question 87:

  You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.

  You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.

  What should you include in the environment?

  A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
  B. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
  C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
  D. Network Controller and Windows Server Software Load Balancing (SLB) nodes
  B. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

• Question 88:

  DRAG DROP

  You are deploying DirectAccess to a server named DA1. DA1 will be located behind a firewall and will have a single network adapter. The intermediary network will be IPv4.

  You need to configure the firewall to support DirectAccess.

  Which firewall rules should you create for each type of traffic? To answer, drag the appropriate ports and protocols to the correct traffic types. Each port and protocol may be used once, more than once, or not at all. You may need to drag the

  split bar between panes or scroll to view content.

  Select and Place:

  

  

• Question 89:

  You have a server named Server1 that has a Server Core installation of Windows Server 2016. Server1 is configured to obtain an IP address automatically.

  You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.

  What should you run?

  A. ipconfig.exe
  B. New-NetiPAddress
  C. Set-NetAdapter
  D. Set-NetIPv4Protocol
  B. New-NetiPAddress

• Question 90:

  You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.

  Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.

  You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1. What should you do?

  A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
  B. From Hyper-V Manager on Server1, modify the settings of VM1.
  C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
  D. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
  E. From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.
  F. From Hyper-V Manager on Server1, modify the properties of vSwitch1.
  G. From the properties of the NIC team on VM1, change the load balancing of the NIC team.
  B. From Hyper-V Manager on Server1, modify the settings of VM1.